Best Golf Club Vise Clamp

JIGEGE 2 Pces Professional Rubber Golf Club Grip Kits for Regripping Golf Clubs Shaft Grips Golf Club Rubber Vise Clamp Replacement Tool Repair Reshaft Golf Clubs Shaft, Grip Repair Kits

  • Made of high quality thick rubber, Strong and durable. Long time use.Rubber has good elasticity and strength to ensure the golf club to keep accurate and safe..
  • The golf vise clamp will help protect your golf shaft against marring and guard against breakage when repairing or regripping golf club in the bench vise..
  • Used with a vice to protect the shaft and hold the club securely in place during assembly and disassembly procedures.keeping your club shaft more firm and steady while you work.pefectly keep your golf clubs tight and prevent slipping..
  • It is approx. 8.8 cm (3.5 inches) long. Suits variety size of golf clubs. The side ribs can increase the friction of vice under low pressure..
  • Easy to operate, easy to install and remove. Lightweight. Convenience to carry..
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • ... at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise..
  • EXCLUSIVE MAGNET RETENTION SYSTEM – The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching, as a golf club vise, and more. For mid-torque bench vise clamping applications see or SH60 grey medium density vise pads..
  • PROTECTIVE SURFACE – While incredibly tough, our 4″ vise soft jaws specially textured surface won’t mar, scratch or discolor delicate surfaces. Tested ....
Check Stock

The GolfWorks GGS Golf Club Gripping Station

  • Save valuable time and improve consistency of your regrips with this well-designed Gripping Station.
  • Built to last under high-volume production, the GolfWorks vise mounted gripping station is compact and easy to use.
  • The alignment bar indexes the leading edge of both right- and left-handed woods and irons, ensuring proper alignment.
  • The quick clamp secures any diameter golf shaft and is safe to use with both graphite and steel shafts.
  • The GolfWorks vise mounted gripping station comes complete with a solvent recovery pan and two tape dispensers - one for each of the double-sided tape and build-up tape (Vise not included).
Check Stock

Mini Bench Vise Small Table Clamp Universal Drill Press Vise For Diy Jewelry Watch Repairing Nuclear Carving Clip Hobby Craft Repair Tool

  • Package include 1 x aluminum vice clamp, mini size and portable, handheld use. it can be installed at the edge of all kinds of desktop, maximum fixed....
  • Mini drill press vise flat clamp table bench with 4 hard adjustable plastic pins for minimizing the risk of slipping and scratching..
  • Mini vise body is made of cast aluminum,a handy miniature vise clamp down any wooden block for sanding,grinding,detail,drilling,carving,chiseling,and....
  • The mini bench vise is ideal for holding small parts in jewelry, jewelry carving, watch repairing, model making, electronics repairing, hobby,....
  • This clamp is easy to use.simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any....
Check Stock

CHAMPKEY STP Polymer Golf Grips Set of 13 - Choose Between 13 Grips with 15 Tapes and 13 Grips with All Repair Kits (Black&Grey(Repair Kits Included), Oversize)

  • Save valuable time and improve consistency of your regrips with this well-designed Gripping Station.
  • Built to last under high-volume production, the GolfWorks vise mounted gripping station is compact and easy to use.
  • The alignment bar indexes the leading edge of both right- and left-handed woods and irons, ensuring proper alignment.
  • The quick clamp secures any diameter golf shaft and is safe to use with both graphite and steel shafts.
  • The GolfWorks vise mounted gripping station comes complete with a solvent recovery pan and two tape dispensers - one for each of the double-sided tape and build-up tape (Vise not included).
Check Stock

Mophorn Milling Vise 4'/100mm,Bench Clamp Vise Nodular Cast Iron Material,Clamping Vise Clamping Force 19KN Max, Milling Machine Vise

  • Clamp Capacity: High precision clamp vise with a jaw width of 3.94 inch (100 mm). Jaw opening: 4.7 inch (120 mm).
  • Main Parameter: Super-lock clamp vise height: 3.7 inch (95 mm). Jaw height: 1.2 inch (30 mm).
  • Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
  • Quality Material: Well-chosen nodular cast iron offers strong toughness, making this clamping vise solid and durable.
  • High Precision: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
Check Stock

SET OF 13 WINN DRITAC AVS MIDSIZE BLACK / BLUE GOLF GRIP

  • Package Includes : 13 * golf grips , 15* golf tapes ,1 * champkey grip tape spray solution,1*rubber vise clamp,1* grip blade..
  • Proprietary Rubber Material : Exclusive high-feedback rubber material used to providing precise ball feedback and comfortable feel all time..
  • Texture Control : 3 kinds of micro texture used to improve traction & control and provide comfortable feel in any conditions..
  • Taper Profile : Traditional taper profile encourages lighter grip pressure, promoting less tension in the hands and creating more fluidity and power throughout the swing..
  • Patent Pending : Designed by champkey and has applied for patents in the us, ca, jp and uk..
Check Stock

Mophorn High Precision Milling Vice 6 Inch,Bench Clamp Vise Nodular Cast Iron Material,Flat Clamp Vise Mill Vise for Milling Drilling Machine and Precision Parts Finishing

  • Clamp Capacity: High precision clamp vise with a jaw width of 5.9 inch (150 mm). Jaw opening: 6.3 inch (160 mm).
  • Main Parameter: Super-lock clamp vise height: 4.7 inch (120 mm). Jaw height: 1.8 inch (45 mm).
  • Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
  • Quality Material: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
  • High Precision: Precision milling drilling vise, able to accomplish sawing, filing, chiseling and some assembly and removal jobs in milling, drilling machine and precision parts finishing.
Check Stock

CLUBRALLY Brake Shoes Spring Kit Fits Club Car 1995-up DS and Precedent Golf Cart 1018232-01 1018163-01

  • ★CLUB CAR BRAKE SHOES SPRING KIT FITS 1995 UP DS & PRECEDENT CLUB CAR GAS OR ELECTRIC GOLF CARTS..
  • ★BRAKE SHOES INCLUDES:Golf Cart Brake Shoes Set(2 Short-17T, 2 Long-17L).
  • ★12 PCS BRAKE SHOES SPRING KIT INCLUDES:(4) BRAKE SHOE CLAMP SPRINGS,(4) BRAKE SHOE HOLD DOWN PINS.(2) BOTTOM BRAKE SHOE SPRING,(2)TOP BRAKE SHOE SPRING..
  • ★CLUB CAR OEM #1018163-01,1011466 1018232-01,AFTER MARKET #S 4324, 4333, 5162, 5219..
  • ★Complete for one golf cart. Easy Installation & 1 year Warranty..
Check Stock