Best Glock Coblowback Pistols

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Glock Magazine Speed Loader for 10MM / .45 AUTO Mags - Model ML 05173

  • Compatible Glock Magazine Calibers: 10MM & .45 AUTO (Not for .45 GAP).
  • Works with Magazines for the following Glock pistols: G20, G29 , G21, G21SF, G30. G30SF.
  • IMPORTANT NOTE: THis model is "NOT" for use with Glock .45 GAP Magazines.
Check Stock

Ankle Holster for Concealed Carry | American Company | B.U.G Leg Holster | Compatible with Glock 43, 42, 33, 30, 27, 26 S&W M&P Shield 9mm, Bodyguard .380, Ruger LCP, LC9, Sig Sauer

  • ✔ FITS MOST GUNS: Fits SUB-COMPACT & COMPACT pistols. Compatible with Ruger, Smith & Wesson M&P Shield 9mm, .40 & .45, Glock 26, Glock 27, Glock 30, Glock 42, Glock 43, P238, P938 Bodyguard, Beretta Nano, Springfield XDs & XDM, Sig, Kahr, Kimber Solo, Kel Tec, Walther, Bersa Thunder 380 Plus, LCR, LCP 380, & LCR 38, Taurus TCP, 709 Slim, PT738 & PT111, SCCY CPX-II and Similar Sized Guns. One size fits most. We recommend handguns with a small or medium sized frame with a length 003c7 inches..
  • ✔ ANTI-SLIP DESIGN: Our spare magazine pocket/pouch is perfect for an extra magazine, pepper spray, taser or knives. Plus our two strap ankle holster design prevents even double stack pistols from slipping down so you will experience NO SLIP DOWNS. One size fits all: Adjustable to 8-13'' in ankle circumference and maximum adjustable size of 16.5'' in calf circumference..
  • ✔ BONUS MAGAZINE RETENTION STRAP: Unlike the competitors, our design has two retention straps for securing both your firearm and spare magazine pouch, providing you with zero chance of anything falling out. ✔SAFETY FIRST: When carrying a firearm safety should be at the top of your list and it is the top priority in our holster design. You will not find a better quality holster on the market....
Check Stock

Ankle Holster for Concealed Carry | American Company | 4 Styles | B.U.G Leg Holster | Compatible with Glock 43, 42, 33, 30, 27, 26 S&W M&P Shield 9mm, Bodyguard .380, Ruger LCP, LC9, Sig Sauer

  • ✔ FITS MOST GUNS: Fits SUB-COMPACT & COMPACT pistols including: Smith & Wesson M&P Shield 9mm, .40 & .45, Glock 26, Glock 27, Glock 30, Glock 42, Glock 43, P238, P938 Bodyguard, Beretta Nano, Springfield XDs & XDM, Kahr, Kimber Solo, Kel Tec, Walther, Bersa Thunder 380 Plus, Ruger LCR, LCP 380, & LCR 38, Taurus TCP, 709 Slim, PT738 & PT111, SCCY CPX-II and Similar Sized Guns. One size fits most. We recommend handguns with a small or medium sized frame with a length 003c7 inches..
  • ✔ ANTI-SLIP DESIGN: Our spare magazine pocket/pouch is perfect for an extra magazine, pepper spray, taser or knives. Plus our two strap ankle holster design prevents even double stack pistols from slipping down so you will experience NO SLIP DOWNS. One size fits all: Adjustable to 8-13'' in ankle circumference and maximum adjustable size of 16.5'' in calf circumference..
  • ✔ BONUS MAGAZINE RETENTION STRAP: Unlike the competitors, our design has two retention straps for securing both your firearm and spare magazine pouch, providing you with zero chance of anything falling out. ✔SAFETY FIRST: When carrying a firearm safety should be at the top of your list and it is the top priority in our holster design. You will not find a better quality holster on the market..
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

Glock Magazine Speed Loader for 9mm/.40/.357/.380 Auto/.45 GAP Mags

  • Compatible Glock Magazine Calibers: 9mm (9 x 19) / .40 / .357 / .380 Auto & .45 GAP.
  • Works with Magazines for the following Glock pistols: G17, G19, G22, G23, G25, G26, G27, G28, G31, G32, G33, G34, G35, G37, G38 & G39.
  • IMPORTANT NOTE: THis model is "NOT" for use with Glock .45 Auto, G42 Single Stack .380 Auto or 10mm Magazines.
Check Stock

Vogel Dynamics Robert World Champion Sights Compatible with All Glock Pistols Including 17,19,21,22,23,24,25,26,27,28,31,32,33,34,35,USPSA,IDPA,IPSC, 3-Gun, 3 Gun

  • Designed by a World Champion for the equal balance of accuracy & speed in Practical Shooting..
  • The wider/deeper rear notch & fiber optic front sight makes them desirable for high speed shooting..
  • Vogel Dynamics World Champion Sights. Compatible with Glock Pistols Front & Rear Sight Set, comes with red fiber optic, and screw..
  • Front: .220 tall, .117 wide / Rear: .250 tall, .150 wide, .130 deep / Fiber Optic Rod Size: .040.
  • Compatible with Glock pistols including Glock 17, 17L, 19, 21,22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38, 39.
Check Stock

Kingslayer

  • ...h ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very c....
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • ...rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE: Some red dots such as....
Check Stock