Best Glass Fiber Filament

AMOLEN Wood Filament Bundle,Walnut,Bamboo Wood,Red Wood,Black Wood,3D Printer Filament,PLA Filament 1.75mm,200g/Spool

4 WOOD PLA FILAMENT BUNDLE - 4 different wood PLA filament with Walnut wood, Red wood, Bamboo and Ebony wood, each filament spool is 200g..
REAL WOOD/BAMBOO FIBER - There is 20% wood fiber in the walnut wood, red wood and ebony wood PLA Filament. The light color wood has 20% bamboo fiber. Therefore, you will get a print like a real wood with matte face and even wood smell..
REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
Print Speed: 30-60mm/s, 40mm/s will be better.

Check Stock

YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black

[Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
[Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
[ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
[Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
[Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.

Check Stock

Wood PLA Filament, Enotepad PLA Wood 3D Printer Filament 1.75mm, Wood Fiber Filled PLA Wood Filament 1KG (2.2 lb) PLA Wood Color

▷ 【20% wood fiber filled】: Enotepad 1.75mm PLA wood filament has 20% wood fiber instead of wood powder. This ensures a real wood structure and texture. Meets the demand for wood print models..
▷ 【Low temperature Recommended setting】: 170-190 ° C (best temperature 180 ° C). Heat bed: 60 70 -70 ℃ (OR glue required). Purity PLA filament raw materials and high-precision diameter tolerance, 1.75mm +/- 0.02mm. Strict control of the even PLA filament diameter and selection of high quality raw materials to avoid jamming of the nozzles due to impurities and diameter..
▷ 【Premium Quality 1.75MM Wood Filament】: For smooth extrusion. Even winding of the 3D printer filament without tangling. The high toughness and strong layer adhesion of the PLA wood filament lead to the first perfectly printed layer..
▷【Stable Diameter PLA】Purity PLA filament raw materials and high-precision diameter tolerance, 1.75mm +/- 0.02mm. Strict control of the even PLA filament diameter and selection of high quality raw materials to avoid jamming of the nozzles due to impurities and diameter..
▷ 【Vacuum packing with desiccant】: Enotepad 1.75mm 3D printer filament is carefully vacuum packed with desiccant to ensure low moisture content and to keep dust and f....

Check Stock

R QIDI TECHNOLOGY PA12-CF Nylon Filament 1.75 Black, Carbon Fiber Nylon Filament 1.75mm 1Kg Spool 3D Printer Filament, High Strength, High Precision, No Warpage, Low Moisture Sensitivity

【Excellent Mechanical Properties】An upgraded formulation of 85% PA12 + 15% Carbon Fiber, this brand new Carbon Fiber Nylon Filament has superb strength, rigidity, excellent toughness, outstanding resistance to impact, wear, chemical and temperature, these properties combined making this PA12+CF Filament an ideal choice for printing parts or personalization..
【High Dimensional Stability】PA12-CF is an enhanced composite carbon fiber nylon material, adding 15% carbon fiber, this carefully formulated blend ensures ease of stable prints, extremely high successful rate, outstanding surface finish and good layer adhesion with no warping and less shrinkage..
【Low Moisture Sensity】PA12-CF’s saturated moisture absorption rate is only one tenth of that of ordinary PA6. Its low moisture sensitivity ensures outstanding mechanical and thermal properties even after the moisture conditioning process..
【Tangle Free & Vacuum Aluminum Foil Package】QiDi PA12-CF 1KG filament 1.75 is carefully winded to avoid any tangling issues. And we used vacuum aluminum foil packaging, its water vapor transmission rate is only 0.014%. You can open it for use without drying..
【Printing Skills】QIDI TECH provide a solution for printing carbon fiber, QIDI TECH X-CF is a ....

Check Stock

LIGHTNING POWDER Zephyr Fiberglass Fingerprint Brush

Capacity to pick up and retain large amounts of fingerprint powder.
The filament ends actually become softer with each use..
Brush consists of thousands of fiber bundles, each composed of more than a hundred individual treated-glass filaments.
Since 1956, the Zephyr Brush continues to be the best fiberglass fingerprint dusting brush available.

Check Stock

SUNLU Carbon Fiber PLA Filament 1kg 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1kg Spool, 1.75 mm

【SUNLU Material】 Carbon fiber Polycarbonate - Color: Black - Weight: 1kg (approximately 2.20lbs)/Spool.
【SUNLU 3D Filament Size】 1.75mm (Tolerance Level : +/- 0.02mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
【Recommended Printing Temp/Nozzle Temperature】 190-230°C (374-446°F), Base Plate Temperature: 60-80°C(140-176°F).
【Performance Advantages】 SUNLU Carbon fiber PLA filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal.
【100% Environmental Friendly】 Carbon Fiber filament 100% Biodegradable, ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances..

Check Stock

Apera Instruments 201T-F All-in-one pH Electrode, ATC, BNC/RCA Connector, Polycarbonate Body AI1302

Built-in temperature sensor, testing pH and temperature simultaneously, enabling Auto. Temp. Compensation.
Apera's special lithium glass membrane ensures generate quick and stable pH readings..
A detachable sensor shield is built upon the sensitive glass membrane to protect it from accidental damage..
A unique junction composed of ceramic and fiber filament efficiently improves the problem of junction clogging..

Check Stock

3DXTECH FibreX PA6-GF30 Glass Fiber Reinforced Nylon, 1.75mm, 500G 3D Printing Filament

30% glass fiber reinforced Nylon 6 Copolymer.

Check Stock

YXPOLYER Carbon Fiber abs ,Carbon Fiber abs Filament 1.75， abs Carbon Fiber Filament,abs Filament,Engineering 3D Printer Filament,1kg Spool,Black

★【ABS-CF10 3D printer Filament】YXPOLYER ABS-CF10 is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Also it is commonly used for printing functional prototypes and production parts. Support Material: AquaSol-120, Alkali soluble filament..
★【Features & applications】 Carbon fiber reinforced ABS，High modulus，Excellent chemical and thermal resistance（The temperature resistance exceeds ABS 15℃）， Strong layer bonding，ease of printing.Suitable for machinery, automobile and other fields, such as elevators, hand tools and calibration fixtures on assembly lines, etc..
【Printing conditions】We recommend print the filament at a Printing temperature of 220℃-260℃, bed temperature of 80-100°C..
★【1.75mm engineering Filament Diameter】Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
★【Triple waterproof protective packaging】Our packaging is vacuum sealed with semi-aluminum foil bags with desiccant,which can better isolate air and water molecules.Vacuum b....

Check Stock