Best Glad Hand Air Hose

iBroPrat Glad Hand Grips Set with Seals,Gladhand Extension Handles Kit Emergency & Service Brake Air Hose Coupling Connectors for Semi Trucks Trailers Tractors RVs, Glad Hands Parts Red Blue 1 Pair

  • ... handles provide better grip than the small cylindrical, and provide greater leverage for ease of coupling/uncoupling air lines..
  • 【NO-LEAK】- High hardness steel clamp plates, port thread machined by lathe, smoother. Leak proof gum on the handle thread. They ensure that glad hands are tightly connected under strong air pressure. Gaskets are made of high-quality rubber, the aging resistance is very strong, prevent air leakage efficiently. Gladhands kit is color coded red & blue for easy identification..
  • 【WITH 2 EXTRA SEALS】- Leakage is usually caused by the wear of rubber. The extra washers keep the glad hands in excellent working condition. This is a very cost-effective solution..
  • 【SIZE & QUANTITY】- Connect size: 1/2 NPT port, Handles size: 4.8 inch x 1.2 inch, Glad hands size: 4.1 inch x 2.2 inch. Quantity: 1 pair glad hands, 1 pair glad hand grip handles, 2 pieces rubber o rings. They are packed in the fine boxes..
  • 【WIDELY USED】- Airline glad hands meet or exceeds SAE J318 requirements. Service and Emergency configurations (polarized) or Universal (non-pola....
Check Stock

KOOTANS 1 Pair Service Emergency Gladhands with Valve Switch Die Cast Aluminum Valve Glad Hands Universal Air Hose Brake Coupling Connector Handshake Kit for Truck Semi Trailer Tractor RVs

  • For the Glad Hands with Valve, the valve is available to control opening and closing. The red valve can be connected with an air blow gun..
  • Kit Contains: 1 pair Gladhands with Valve(Red + Blue) + 1 pair Brass Fittings. Color coded red & blue Gladhand for ease of emergency and service line identification..
  • Glad Hands Port Size: 3/8'' FPT, 3/4'' MPT or 1/2'' FPT(The connector at the port can be removed as required). Red Side Port: 1/4'' FPT, air blow gun can be connected, so NO PLUG for the hole.
  • Brass Fitting: one port: 3/8'' MPT. Another port can connect 6mm air hose..
  • Handshake Kit was constructed of die cast aluminum with stainless steel wear plates. Service and Emergency configurations (polarized) or Universal (non-polarized). Meets SAE J318 requirements. We offer an 1-year after-sales service for this product. Any problems, please contact us..
Check Stock

JoyFans Cylinder Leak Down Tester Kit Professional Dual Pressure Gauges Engine Compression Leakdown Detector Leakage Test Set for Gasoline Engine with 10 12 14mm Spark Plugs Red

  • Pneumatic Work: This air-compressed operation needs power support from air compressor (not offered in this kit) within the standard shop air supply of....
  • Double Tests: Dual gauge manifold approves cylinder pressure detection for use in conjunction with cylinder leakproofness check. Measuring from 0-7....
  • Wide Application: It is not just as a compression tester. There is 1pc 10" rubber hose and 2pcs aluminum adapters besides the combustion leak tester.....
  • Easy Use: Assemble the 10" hose onto the cylinder pressure gauge manifold through quick disconnect system, M10 or M12 metal adapter can also be added....
  • Considerate Service: We are always glad to offer customers satisfactory shopping experience and after-sales services. We have 30-day free return for....
Check Stock

JoyFans Cylinder Leak Down Tester Kit Tu-21 Small Engine Combustion Leakdown Detector with Compression Gauge Spark Plug Adapters for Pressure Leakage Test on Automotive Motorcycle Car Blue

  • Air-compressed Work: This pneumatic cylinder leak down tester tool needs power support from air compressor (not provided in this package) within the....
  • Dual Detections: Cylinder leak tester tool approves cylinder pressure test for use in conjunction with cylinder leakproofness detection. Reading from....
  • Wide Coverage: It is not just as a compression tester. There is 1pc 10" rubber hose and 2pcs aluminum adapters besides the combustion leak tester. The....
  • Easy Usage: Install the 10" hose onto the cylinder pressure gauge manifold through quick disconnect system, M10 or M12 metal adapter can also be added....
  • Considerate Service: We are always glad to offer customers satisfactory shopping experience and after-sales services. We have 30-day free return for....
Check Stock

Air Conditioner Exhaust Hose with 5 Inches Diameter, Counterclockwise Thread Compatible with Portable Air Conditioner (59 Inches Length)

  • COMPATIBILITY: this air conditioner hose is compatible with portable air conditioner, replaces the original hose with 5 inch diameter and counterclockwise thread.
  • STRETCH AND SHRINK FREELY: the hose is extendable, the shortened length is 12.6 inch/ 32 cm, it can extend up to 59 inch/ 150 cm, easily extend the length of the exhaust hose to fit into anywhere you want.
  • DURABLE AND STURDY: hose is constructed from polypropylene with good flexible, durable and portable, this is a good replacement to keep your air conditioner from leaking when the essential vent hose has cracked.
  • EASY TO INSTALL: gently extend out the exhaust hose to meet up with the existing hose, line up with the both ends, clockwise rotate until it snaps into place, it's easy to install.
  • Note: please make sure this is the correct hose both the size and thread for your portable air conditioner before purchasing.
  • If you have an adapter that screws on the end, the winding direction is very important.If you have 5" ends but make sure that your ends are right hand threaded because the hose is right handed some need left hand threaded,If you have any problems about your purchase, please don't hesitate to contact us and we'll make it right.
Check Stock

SANFU Polyurethane(PU) 1/4-Inch x 100ft Reinforced, lightweight Air Hose with 1/4” Swivel Industrial Quick Coupler and Plug, Bend Restrictor, Transparent Pink(100’)

  • 【(PU)POLYURETHANE HOSE】: This raw material is pure polyurethane(polyester). SANFU pu reinforced air hose is ideal for indoor finishing work and it won’t cause damage to painted surfaces, wood flooring and trim..
  • 【Performance】: Abrasion, oil, grease resistant. Light weight and perfect for the job(roofing). This air hose was very sturdy and reached the street with ease. It has installed the industrial brass coupler&plug, especial swivel design ending. Bend restrictor reduce kinking and prolong the lifetime of hose..
  • 【FLEXIBLITY&DURABILITY】: This pu reinforced air hose can reach to max working pressure 300PSI, max bursting pressure is 900PSI. Temperature range is -10 to +150 Degrees Fahrenheit. Portable hose and easy to carry in your hand..
  • 【Easy to use】: You can use this SANFU air hose at home, roofing, workshop, garage, industry, pneumatic. Brightly orange color can help you to find the air hose quickly and use it..
  • 【Two years limited warranty】. Hose length:100ft can reach to the working place which you need. It can connect to Nailer gun, air blow gun, air spray gun, tire inflator gauge, air compressor and air wrench..
Check Stock

Boeray Glad Hand Handles, Air Glad Hand for Semi Trucks and Trailers with Extension Handles, Tractor Glad Hand Grips with Seals for Air Hose Freightliner

  • ... handle with knurling for anti skid and easy installation by hand,drivers could replace the old ones with minutes.
  • NPT port thread done by high accuracy CNC machiner, it keeps the tightly holding between the parts and no air leakage.
  • 【NO LEAKS】- The black seals on the glad hands with tapered base and high quality polyurathane. The tapered base design could help easy replace and good sealing.
  • The wear resistance seals could prevent air leaking under high pressure working conditions.
  • 【REPLACEMENT】- Fit most offroad trucks,trailers,semi trailers,freightliners, vnl tractors, such cross refenence numbers as Velvac 035042/035045, Bendix 278850/278851, BWP M313C, Tramec 362012, Tectran 1011EF/1011SF, GLOBETECH GT-5331, HEBCO 441016, Vipar 079851, and etc..
  • 【DIMENSION】- Glad Hand Size: 4.1 inch x 2.2 inch / 106mm x 56mm.
  • Extesion Handle: 1/2" Male and Female thread, length 4.8".
Check Stock

GREPSPUD 100pcs Glad Hand Seals Rubber Truck Gladhand Seals Black Polyurethane Seal Washers Grommets Round Gaskets for Semi Trucks Trailers Tractors, Parts Number 10028

  • 【100 PIECES VALUE PACK】- Glad hand seals bulk, large quantity, can meet various use and replacement needs in your daily work, and you can also share them with others. Carry seals with the vehicle and replace broken ones immediately when necessary..
  • 【NO LEAKS & LONG SERVICE LIFE】- These glad hand o rings are made of top quality rubber. They're durable, good elasticity, high toughness, good wear and tear resistance, resist oils, corrosion and water, with perfect sealing and compatibility. Each gasket fits your glad hands snugly and seamlessly. O-rings have good aging resistance, work well under long-term weather changes..
  • 【FINE WORKMANSHIP & EASY TO INSTALL】- These glad hand seals are fine workmanship, soft touch and smooth surface. The gaskets bulge in the middle, make the seal tighter. Seals with a curved edge base for easy to install, just press the bottom part into the glad hand. Perfect for your truck..
  • 【WIDELY USED】- These round rubber glad hand seals are perfect for all industry standard glad hands on the market, they are compatible with Haldex 10028 Tramec 36001 Tectran 10111 Phillips 12-0....
Check Stock

wolltex 3 in 1 Wrap Air Power Line 15 Feet Heavy Duty 7 Way semi Truck Trailer Electrical Cable ABS Wire & Air Hose Assembly with Aluminum Service Emergency Glad Hands (Hosses with accesories)

  • KIT CONTAINS: 3-IN-1 Heavy duty 15 feet trailer air line & ABS wrap cord assembly + 1 pair Gladhands (Red + Blue) + 1 pair Extension Handles..
  • THE 3 IN 1 AIR POWER LINE CONTAINS: Service air line rate to -65F (-55℃), ABS power line (green) rated to -85F (-65℃), Emergency air line rated to -65F (-55℃). Fully enclosed in spiral wrap to prevent lines from becoming tangled. And it is more wear-resistant..
  • THE EXTENSION HANDLE: Installed between glad hands and air brake lines. It is easy to install. Provides added leverage for coupling/uncoupling gladhands without damaging the hose ends and fittings. Rugged anodized aluminum is more durable and corrosion resistant than cheaper plastic models. Diamond knurled textured exterior for improved friction..
Check Stock