Best General Purpose End Mills

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.
Check Stock

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials and high temperature alloys.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check Stock

Niagara Cutter - C430-0.188-D7-S.0-Z4 N85729 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 3\ Overall Length, 0.188\ Cutting Diameter, 0.188\ Shank Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate General purpose end mill for working all types of materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Aluminum Nitride (TiAlN) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Niagara Cutter - CSD430-0.375-XD2-S.0-Z4 17006425 Carbide Square Nose End Mill, Double End, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2.5' Overall Length, 0.375' Cut Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate General purpose end mill for working all types of materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Aluminum Nitride (TiAlN) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
  • Item Package Dimension: 2.899999997042" L x 0.699999999286" W x 0.599999999388" H.
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

MSA 10033652 Bump Cap, Hard, White 1/EA

  • HIGH QUALITY PROTECTION: Intended for general purpose use or in places elevated temperatures. These Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
  • MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
  • FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
  • VARIETY OF SIZES & COLORS: Comes available in a large variety of colors an....
Check Stock

ERB 19115 Hi Viz Pink 67 Bump Cap, Pinlock Adjustment, 4-Point Plastic Suspension

  • HIGH QUALITY PROTECTION: Intended for general purpose use or in places elevated temperatures. These Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
  • MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
  • FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
  • VARIETY OF SIZES & COLORS: Comes available in a large variety of colors an....
Check Stock

Pyramex Safety Products HP14112 Sl Series 4 Pt. Ratchet Suspension Hard Hat, Gray

  • HIGH QUALITY PROTECTION: Intended for general purpose use or in places elevated temperatures. These Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV]..
  • MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels..
  • FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet..
  • VARIETY OF SIZES & COLORS: Comes available in a large variety of colors an....
Check Stock

HHIP 3900-1005 5-Piece R8 End Mill Holder Set, 3/16-3/4'

  • 5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
  • Hardened and ground For Bridgeport type milling machines.
  • Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
  • 5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
  • For double and single end mills (single end mils only for sizes over 5/8").
Check Stock