Best Geared Pulley

GM CLIMBING 20kN Micro Prusik Minding Pulley 1/2\ CE UIAA Certified (Pack of 2(Black))

  • GM CLIMBING Micro Prusik Minding Pulley (PMP), rated at 20kN/4500lbs MBS, both CE and UIAA certified, compatible with ropes up to 1/2 in / 13mm. Function pulley installed on ropes and clipped to tend hitch slacks in Ddrt climbing or work-positioning. A day-to-day use pulley in riggings, integrated with prusik hitches to build progress capture on haul system, making efficient redirects in bear rigging, home pulling exercise devices, and more to explore..
  • Quality-made climbing pulley, with 20kN breaking strength [5kN higher than required 15kN by CE and UIAA], to build up efficient pulley mechanical advantage systems: haul your partner out of the crevasse - personal rescue, rig gears or heavy loads when mountaineering, pull out a stranded car/ boat, haul food and stuffs out of reach when camping - bear rigging..
  • Palm-size pulley in lightweight of 3.7 oz. The micro pulley is easy to use with only one hand. Mobile side plates rotate freely around the axle and it's convenient to install the pulley anywhere on the rope. The pulley accommodates carabiners of most shapes since side plates are curved to stay fully close against each other on the top..
  • Prusik Minding! The pulley is designed to be with flat bottom to side plates, which makes a PMP (prusik mind....
Check Stock

Pulley Wheel Stainless Steel Small Pulley Block 360 Degree Rotating Silent Cable Pully Load Bearing Mechanical Pulleys, Silver (Silver-2)

  • Material:Pulley wheel is made of high-quality stainless steel, which is strong, rust-proof, wear-resistant and corrosion-resistant.
  • Whirling:Top of pulley system 360 degrees whirl to prevent the rope from twisting, maintain a stable cable pulley block,load bearing.
  • Quiet:Rope puller smooth sliding, small high-quality nylon slot double bearing design pulley pro does not produce noise.
  • Install:Pulley hoist can be installed on wood, wall and metal, rope pulley suitable for home fitness or outdoor work.
  • Gym pulley system:Pulley attachments specially designed for home gym pulley system DIY, construction, cable hoisting etc.
Check Stock

TooTaci Pulley System Set,Pulley Block with Rope and Hooks,Pulley and Rope Kit for Lifting,304 Stainless Steel M20 Single Pulley Wheels,with 20M/4mm Nylon Rope,Hooks,Eye Pad Plate,Cleat Hooks

  • Pulley Block Kit comes with 2Pcs M20 Crane pulley block,2Pcs Carabiner Snap Hook Clips, 2Pcs Oblong Eye Pad Plate, 2Pcs Cleat Hooks, 20 meter Nylon Pulley Line Rope And screw Accessories Ideal Kit to Make an Easy Pulley System for Pulling & Lifting ..
  • This Pulley System Set have all the Items you needed for pulley system rather than have to buy each part separately.
  • This Kit include Pulley Block ,Carabiner Hook, Eye Pad Plate,Cleat Hooks all made of 304 stainless steel, anti-rust and wear resistance with strong structure, easy to fit and use in any weather !.
  • Pulley Block with Ergonomic design, fixed top for easily rope handling.
  • 4mm Pulley Line rope 65ft extreme strong with high tenacity and enough length.
  • Eye Pad Plate & Carabiner Hook provide versatile binding with rigging or anchoring for quick connect of ropes, chains, straps..
  • NOTE: The Maximum Load Capacity of a Single Pulley Block is 50KG/110LB !.
  • Pulley with Rope and Hook Many Uses for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,tarps ,etc....
  • As a topping lift for a portable garage door.
  • Works well for bird feeder pulley system, pull and climbing ropes to raise and lower.
  • Used to fit and tension a sail shade,... Perfect doe....
Check Stock

Continuous Geared Door Hinge Dark Bronze Anodized Aluminum Full Surface 83 inch Heavy Duty Center Pivot Tamperproof for Storefront Door Comparable to Select SL57 Door Hinge

  • RELIABILITY: The LH-HD157 Continuous Geared Hinge is a durable, long-lasting solution for doors in public buildings that have to withstand constant use in high-traffic areas..
  • QUALITY: The LH-HD157 Continuous Geared Hinge distributes the door’s weight evenly along its entire length, ensuring that the door will never sag and will continue to open smoothly for years. Designed to conform with ANSI/BHMI A156.26-2006 standards, this heavy-duty continuous geared hinge is the economical choice as it lengthens the life of the door and frame by 400%..
  • SAFETY: The LH-HD157 Continuous Geared Hinge conforms to the industry standard 90-minute fire rating, keeping the door operational to ensure safe evacuations in an emergency situation..
  • VERSATILITY: The clean, unobtrusive lines of the LH-HD157 Continuous Geared Hinge make it an appropriate design choice in a wide range of architectural styles without compromising aesthetic integrity..
Check Stock

Continuous Geared Door Hinge Full Surface Anodized Aluminum 83 inch Heavy Duty Center Pivot Tamperproof for Repairing Storefront Door Compare to Select SL57 LawrenceLH-HD157

  • RELIABILITY: The LH-HD157 Continuous Geared Hinge is a durable, long-lasting solution for doors in public buildings that have to withstand constant use in high-traffic areas..
  • QUALITY: The LH-HD157 Continuous Geared Hinge distributes the door’s weight evenly along its entire length, ensuring that the door will never sag and will continue to open smoothly for years. Designed to conform with ANSI/BHMI A156.26-2006 standards, this heavy-duty continuous geared hinge is the economical choice as it lengthens the life of the door and frame by 400%..
  • SAFETY: The LH-HD157 Continuous Geared Hinge conforms to the industry standard 90-minute fire rating, keeping the door operational to ensure safe evacuations in an emergency situation..
  • VERSATILITY: The clean, unobtrusive lines of the LH-HD157 Continuous Geared Hinge make it an appropriate design choice in a wide range of architectural styles without compromising aesthetic integrity..
Check Stock

Phoenix V-Belt Pulley - 5/8in. Bore, 4 1/2in. Outside Dia.

  • Price For: Each Set Screw Included: Yes Construction: Spoked Number of Grooves: 1 Item: V-Belt Pulley Pulley Bore Type: Fixed Bore Pulley Type: Standard V-Belt Pulley For V-Belt Section: 3L, 4L, A Bushing Required: None Pulley Material: Die Cast Zamak 3 Pulley Bore Dia.: 3/4" Pulley Outside Dia.: 7.00" 4LA or A Belt Pitch Dia.: 6.85" Keyway Size: 0.187" x 0.093".
  • 4L, A, or AX Belt Pitch Dia.: 6.85" 3L Belt Pitch Dia.: 6.55" Fits Shaft Dia.: 3/4" Country of Origin (subject to change): United States.
Check Stock

GM CLIMBING 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

  • GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
  • Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
  • EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
  • 29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
  • A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....
Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock