Best Gear Pump Actuator

Oberdorfer N993R Gear Pump with Relief Valve, 8.8 gpm, 1/2\ NPT, 20 ft Maximum Suction Lift

SPECIFICATIONS: The International Fluid Power Birotational Gear Pump is a heavy-duty gear pump with a 2-bolt B mount, 1” NPT work port, 3000 PSI, 23.8 GPM flow rate, and 2400 maximum RPM. It weighs 37 lb..
HIGH EFFICIENCY: With 2400 max RPM and 23.8 GPM flow rate, this hydraulic gear pump offers high volumetric output. The IFP gear pump provides exceptionally dynamic performance and operational efficiency in demanding conditions..
ROBUST: Our hydraulic rotary pump is equipped with top-grade cast iron flanges, shaft bearings, castings, and an aluminum-alloy body to handle system transmission pressures of up to 3000 PSI. Its endurance makes it ideal for harsh conditions..
CONVENIENT: This low flow hydraulic pump, made from top-grade materials and precision-honed to perfection, is compact, portable, and interchangeable with Parker "P51.

Ideally used in bassboats, flat boats, and other low profile boats for automatic drain control and livewell management.Fit Type: Universal Fit.
Accepts mounting of one standard aerator pump for both filling and recirculation.
Includes closed recirculation mode which allows addition of optional pump-out system.
Cable approach from the rear/transom side of the boat.

Self Contained Hydraulic Pump System (No Reservoir or lines to install).
Hydraulic actuator is made in the U.S.A..
Rod and Slot Lifting Design - Trouble Free Lifting Action.
Hi-Tech Engineered Polymer Rods - 6 Times More Abrasion Resistant than Steel Rods.
Made from Self Lubricating Material, no grease required.

Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.

Includes 12 volt 225 lbs Linear Actuator (multiple stroke lengths available) with Mounting Brackets, AC to DC 12 Volt Power Supply, MOMENTARY Up/Down....
Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not....
Complete kit allows end user to mount linear actuator, power the linear actuator from an AC power source (wall outlet), and control the up/down....
Actuator Stroke Length = (options range from 2" to 30"), (, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N),....
Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black).

...lity diecast aluminum, our fuel transfer pump with automatic shut-off nozzle is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
ROTARY GEAR DESIGN: The rotary gear pump is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 15GPM. Additionally, the innovative spin collar design of our fuel transfer pump makes installation fast and easy!.
2-YEAR WARRANTY: Our M-150S GPI fuel transfer pumps come with a 2-year warranty and are UL Listed Motor and CSA Certified. Feel confident in knowing that your fuel pump has been providing longer run times and award-winning performance..

Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop..
Includes 1pc 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners..
SEE IMAGES FOR DIMENSIONAL DRAWINGS AND ADDITIONAL SPECIFICATIONS.
Actuator Stroke Length = 30 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps.
Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black).

Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, and 2pcs steel mounting brackets with fasteners..
Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop..
Actuator Stroke Length = 8 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps.
Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black).

Includes 2pcs 12 volt linear actuator (select stroke length), 1pc DPDT up/down switch, one AC to DC 12 Volt power supply, 4pcs steel mounting brackets with fasteners, and connecting wires.
Includes MOMENTARY Up/Down Switch: The actuator will only move when the up/down switch is being pressed with your finger. The moment the switch is not being pressed with your finger, the actuator will stop.
SEE IMAGES FOR DIMENSIONAL DRAWINGS AND ADDITIONAL SPECIFICATIONS.
Actuator Stroke Length = 30 inches, Travel speed = 0.39 inches/sec (10 mm/s). Actuator Maximum Dynamic Load = 225 lbs (900N), Actuator maximum current draw = 2.2 Amps.
Linear actuator is IP65 rated (suitable for outdoor use). Exterior material of linear actuator is 6061 Aluminum (powder coated black).