Best Gear Box Motor

New RV Wiring Harness w/Switch 5th Wheel Landing Gear Motor System 045-141892- Sold by Lil_Charm!

➨ listing includes: 1 (One) 5th Wheel Landing Gear Switch / Harness Part# 045-141892.
➨ Used to raise and lower the legs of the landing gear. ❀Universal and can be used with any motor. ❀ 12g wire and 30 amp in-line fuse - 4 wire Install (2 for motor / 2 for battery).
➨ Heavy duty water tight switch ❀ Switch is labeled extend and retract for no guessing operation.
➨ If you are converting you manual system over to a motorized system this harness is a must..
➨ You must use 1 switch per 1 motor. ❀ Items are purchased in bulk quantities so no retail box..

Check Stock

Miranda Loves Grills Ukraine and Cyprus

Heavy Duty BBQ Grill Motor. Rust free construction, sturdy and heat resistant.
Can be powered both by the mains (AC current) or directly on car battery. Supplied with a 6 meters apprrox. long wire..
The steel mechanism is installed in a strong metallic box to avoid any alteration or damage from high temperature of the grill.
The motor turns 16 - 45 times per minute and can run up to 12kgs balanced load. It has a built in gear Box Reducer - All Metal Gears.

Check Stock

Greartisan DC 12V 100RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter Gearbox

【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body..
【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%..
【D SHAPED OUTPUT SHAFT】: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable..
【POSITIVE-NEGATIVE ROTATION】: You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms..
【RELIABLE GURANTEE】: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!.

Check Stock

Greartisan DC 12V 2RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Eccentric Output Shaft 37mm Diameter Gearbox

ALL-METAL GEARS: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body..
PURE COPPER WIRE CORE ROTOR: With precision winding technology, the geared motor power instant increased by 30%..
D SHAPED OUTPUT SHAFT: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable..
POSITIVE-NEGATIVE ROTATION: You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms..
RELIABLE GURANTEE: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!.

Check Stock

Greartisan DC 12V 5RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter Gearbox

ALL-METAL GEARS: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body..
PURE COPPER WIRE CORE ROTOR: With precision winding technology, the geared motor power instant increased by 30%..
D SHAPED OUTPUT SHAFT: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable..
POSITIVE-NEGATIVE ROTATION: You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms..
RELIABLE GURANTEE: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!.

Check Stock

Greartisan DC 12V 200RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter Gearbox

【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body..
【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%..
【D SHAPED OUTPUT SHAFT】: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable..
【POSITIVE-NEGATIVE ROTATION】: You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms..
【RELIABLE GURANTEE】: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!.

Check Stock

PROGRESSIVE AUTOMATIONS 12V Industrial Linear Electric Actuator. 6 in. 330 lbs. Stainless Steel Rod, High Force, Brushed DC Motor, Durable Stroke for Marine, Automation, Robotics PA-09-6-330

【Specification】: Stroke: 1.2inch-6.5inch (Adjustable).
Rated Voltage: DC24V. Under the same 24V voltage, the closer to the axis, the greater the pushing force. The maximum pushing force is 7.5kg. The pushing force will be reduced by about half every 1 centimeter of movement outside the axis..
【Aluminum Alloy Material】: The surface has been polished 27 times, the aluminum body efficiently dissipated the DC motor heat, it can make the motor stays cool to the touch even under load..
【TORQUE】: When the Rocker Arm is Closest to the Axis AND voltage is 24V, the maximum pushing force can reach 15 lbs. However, with the decrease of voltage and the Rocker Arm is Far Away from Axis, the Torque will be smaller.The minimum torque is 3.2 lbs..
【Stroke Adjustable】: The stroke can be adjusted by changing the position of the screw on the slide rail. The stroke of this product can be adjusted according to the needs of users..
【Metal Gear Reduction Box】: All metal gear, you could use gear grease in the gear reduction box. In this way, the friction will be reduced and the machine will work more smoothly..

Check Stock

JIARUIXIN 2 Pcs Universal 550 40000RPM Electric Motor RS550 12V Motor Drive Engine Accessory for RC Car Children Ride on Toys Replacement Parts

2 pcs RS550 12V 40000 Rpm universal Drive motor.
Motor Diameter: 35mm(1.38").The motor length is 57mm(2.25"). The total length of the motor is 80 mm(3.15")..
Voltage: 12V，Specially customized for car modification （High Speed ).
package contains 2Pcs motor, 2Pcs S gear and 2Pcs B gear, 2Pcs C gear,Gear is not mounted on the motor, but in the package.
motor is equipped with 10 teeth 3 different gear sets. According to your original teeth, it must be exactly the same. The bottom of the gear motor must be strong and can be directly beaten on the teeth..

Check Stock

Traxxas 36054-1 1/10 Stampede 2WD Truck BlueX RTR w/TQ Radio/iD/XL-5 ESC

Traxxas 36054-1 - Stampede XL-5 1/10 2WD Monster Truck & iD Battery RTR, Blue.
Features: Chassis: Fiber Composite Tub .08" (2mm) Thick, Gray in Color. Drive: Rear Wheel, Motor 550 Size Traxxas Titan 12 Turn, Fan Cooled. Radio: Traxxas TQ Two Channel 2.4GHz with Steering/Throttle Trim/Reverse, Throttle Neutral Adjust and High Torque Waterproof Steering Servo, Water Tight Receiver Box with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.

Check Stock