Best Gate Latches For Wooden Gates

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

HOME MASTER HARDWARE Self-Locking Gate Latch Stainless Steel Automatic Wood Fence Gate Latches with Screws 2 Pack

  • Home Master Hardware gate latch is made from 304 stainless steel, strong and sturdy, which means that it can last on your doors and gates for a very long time..
  • Self-latching fingertip release design ,for right or left hand installations..
  • Stainless steel gate latches (2-Pack) come with mounting screws so installation is quick and easy..
  • Ideal for out swinging or in swinging gates or doors. this automatic gate latch is self-latching, it becomes very convenient for your doors and gates to be latched!.
  • Gate latch is security,If you hope your gates and doors to be secured, this stainless steel steel latch can be installed on your gates for additional locking and fastening with a padlock (padlock not included).
Check Stock

VIGRUE Gate Latch - Heavy Duty Self-Locking Automatic Gate Latch for Wooden Fence with Fasteners Hardware for Secure Pool, Yard, Garden, Black

  • Good Security Protection: VIGRUE self-adjusting gate latch is suitable for doors that open on the left or right. Provides Security to dogs, pets, and babies,Prevent predators from entering the garden..
  • Easy to Install: Heavy Duty Gate latch kit comes with all the parts and accessories,including 12 pcs self-drilling screws and installation instructions. Installation easily completed according to the installation instructions..
  • Reliable Quality: made of Strong thickness Steel, strong steel metal construction. Black Surface treatment Powder Coating Corrosion resistance, will not rust, increases gate latch life..
  • Convenience use: Locking gate latch locks from both sides, with self-drilling screws. Can be padlocked for added security with ordinary padlock (Padlock is not included)..
  • Compatibility and Tips: VIGRUE gate latches are suitable for gates and fences. Patio gates, garden gates, shed gates, pool gates, wood fences, vinyl fences. And the and the gate post size should be greater than 1.5*2.5 inches.Please measure the gate size before purchasing..
Check Stock

Bdmetals Gate Latch Heavy Duty for Wooden Fence, Aluminum Double Side Swinging Door Latch Gate Hardware,Self Locking Outswinging Door Latch Gate for Garden Farm

  • Material: This gate latch is made of premium aluminum.
  • Surface Treatment: black powder coated., which can lock doors and wooden fence firmly, is not easy to rust and can be used for a long time. It is a good choice for indoor and outdoor use..
  • Unique Desigh:Double side gate latches.You can choose any side as the front or back.Provide convenience and convenience of life..
  • Quick Installation: The installation only requires 4 simple step. Pictures can be referenced, and we have equipped you with detailed instructions..
  • Applications: Widely used in indoor and outdoor.Looks great on double gates,garden gates,farm gates, chicken coops,picket fences ,attic doors, tool sheds, garages and so on..
  • Dimensions:Overall length:Overall length:8 5/32",Backboard height: 8 17/32",Fit for the door thickness:1 3/8"~3 1/2"..
Check Stock

Ronlap Gate Wheels for Wooden Gate, Spring Loaded Gate Caster Heavy Duty for Metal Tube Swing Gate, Small Fence Gate Support Wheel with Universal Mount Plate, 220 Lbs Capacity, 4 Inches, 2 Pack, Black

  • 【Built-in Spring Design】: Innovative spring built-in-design, extends spring’s service life while providing a more beautiful appearance. The built-in spring-loaded clamp acts as a shock absorber when the gate wheels for wooden gate roll over uneven or rough surfaces, reducing stress on the gate hardware and extending the life of a gate's posts and hinges.
  • 【Spring-loaded Gate Caster】: Adjustable spring bracket with up to 1-3/4” spring-loaded vertical travel, automatically adjusting gate height with surrounding terrain throughout the opening and closing cycles, effectively prevent gates from sagging to keep the fence line level.
  • 【Heavy Duty Gate Wheel】: Thicken matte black power coat finish plating steel plate and double ball bearing bring strong load bearing support, 220lbs maximum load capacity for each gate wheel, make it easy to open or close large heavy wooden gates, vinyl gates, metal tube gates or metal swing gates.
  • 【360° Swivel Fence Gate Wheel】: 4 inches ageing resistance rubber caster with 360° rotation top plate, great in mechanical strength and loading capacity, easily transform to any di....
Check Stock

Self Locking Gate Gravity Latch Stainless Steel Spring Loaded with Adjustable Gate Latch Cable Pull for Metal Wooden Fences 2 Pack (Red 2 Pack)

  • Stainless steel cable with red power coated and PVC coating finish with weatherguard technology to protect against rust and weather..
  • Fits gates with a 4 inch to 2-6 inch thickness. The brass cylinder is just fits the hole that greater than 0.18 inches (4.5mm) and less than 0.31 inches (8mm) for the brass cylinder nut to fit in the hole..
  • Stainless steel spring assisted pull for one hand operation, gate latches can still be padlocked while using this gate pull..
  • Use this cable pull with new or existing gate latches.
  • This cable pull does not come with a gate latch..
  • For use with metal, vinyl, and wood gates. Contents: Package includes Gate latch cable *2+ brass cylinder *2+ spring*2+End Cap*2+Hexagonal Wrench*2..
Check Stock

Safetech Hardware X2 Two Sided Gate Latch - Key Lockable Gate Lock - Pool Safety Fence Latch – Various Gates Security Lock Latch - 2 Independent Latching Hooks – Metal, Wood & Vinyl Gate Latch

  • ...s can be locked and unlocked with the key only on the pull side of the gate. After the simple installation children will not be able to reach potentially unsafe areas around swimming pools, childcare centers, and other areas where safety is critical..
  • ✅ HIGH QUALIY CONSTRUCTION MATERIAL: Our pool safety fence latches are made of high-quality industrial strength metal replacement polymers and stainless-steel components that won’t rust making the latch tough and reliable. These are fitted to most types of gates and gate materials, including steel, wood, and vinyl..
  • ✅ LOCKABLE GATE LATCH: This gate latch has usable locks on sides of the gate for easy entry going in either direction. An easy to install strong lockable latch is for use with all square gate posts. You can lock the latch with the provided key. Your security gate will be secure when the independent latching gate latch is locked..
  • ✅ EASY INSTALLATION: The safetech security gate latch is a general purpose lockable latch that is quick and easy to install and adjust. Our pool fence latch is constructed of industrial-strength polymer and stainless steel components, meaning no need to worry about rust or stains..
  • ✅ 100% SATISFACTION GURANTEE: Our vinyl fence gate latches come with a 100....
Check Stock

Self-Locking Gate Latch - Post Mount Automatic Gravity Lever Wood Fence Gate Latches with Fasteners/4.7 Inch Black Finish Steel Gate Latch to Secure Pool

  • ★Post mound gate latches offer simple security for inward and outward swinging gates and doors.
  • ★This gate latch features a self-latching fingertip release, easy to install.
  • ★Our gate hardware is suitable for right or left hand installations, latches automatically.
  • ★Easily replace your pool gate latch vinyl gate latch, and wood fence gate latches. Please check the size before you buy!.
  • ★Strong steel metal construction, furnished screws included, save time and money and maximize your gate security.
Check Stock

12" Cane Bolt Heavy Duty Drop Rod Gate Stopper Hardware, Gate Ground Latch for Wooden Fences Metal Gates Doors, Gate Drop Pin for Holding Gate to The Ground, Black Finish

  • 【Weatherguard Protection】 Made of thick gauge black steel with black powder coated to withstand harsh weather conditions and prevent steel from oxidizing and corroding. It is suitable for long-term outdoor use..
  • 【Application Widely】 Designed for use on heavy duty wooden gates, fences, and doors in vertical or horizontal applications. You don't have to worry about the pole slipping out even if you install it horizontally because of the upper ear on the rod. Also perfect use for double gates to hold one stationary while the other gate is latched to it. Widely used on wooden fence gates, metal gates, iron gates, vinyl gate or double gates, doors, etc..
  • 【Keep Gates Secure】 Our cane bolt is designed to secure your single or double doors in the open or closed position. Protect your gates from moving around in the wind and the hazards that movement can present. 12 Inch drop rod is enough to steadily hold the heavy duty gate in place..
  • 【Convenient Use】 Just rotate the rod outward to slide down through the holes of the brackets and insert it into the ground, to keep your gate or fence in a stable position..
Check Stock