Best Gas Turbine Meter

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..

Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..

Check Stock

Worx Wg545.1 20v Air Cordless Leaf Blower Sweeper

[TURBINE FAN TECH] Worx engineers figured out how to get a jet engine-type motor inside of a leaf blower. Super powerful, yet not so loud that you’ll think it’s getting ready for takeoff.
[2 SPEEDS FOR DIFFERENT JOBS] Go slow for pavement or tight corners. Switch to speed 2 on the open lawn and see what 75 mph of Turbine blowing power can do.
[SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
[A WIDE, STRONG STREAM OF AIR] 360 CFM (Cubic Feet per Minute) come streaming out of this wide-mouth tube. That’s high-capacity air volume, so you clear your property in fewer passes and with less leg work.
[ONE-HANDED OPERATION] With all that power, the Turbine is designed to be controlled with just one hand. It’s only 4.9 lbs., and the ergonomic design funnels the wind in a way that’s easy to handle.
[GREEN AND MEAN] No gas and no cord plugged into the wall. Rechargeable, battery-powered tools are friendlier on the environment, more cost-effective, and more convenient. And they don’t skimp on power.
[COMFORTABLE CONTROL GRIP] The rubber overmold handle absorbs vibration and reduces hand fatigue, so you can get more done with less strain.

Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

...rdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applic....

Check Stock

Oxygen Air Flow Meter LZQ-1 1~5LPM Oxygen Carbon Dioxide Measuring Flowmeter Gauge Oxygen Gas Flow Meter

HIGH PERFORMANCE: All kinds of gas measurement accuracy is high, suitable for a variety of occasions, you can avoid the trouble caused by the reading error when you measure..
PRECISE: The air flow meter is simple, practical and easy to use. The transparent panel type makes the reading simple, convenient and clear..
CONVENIENT: Gas flow meter is an instrument for measuring gas rate of flow, which is installed in the pipeline to record the gas flow..
Texture of Material: The gauge consists of acrylic, plastic and metal. Lightweight and durable, suitable for long-term use..

Check Stock

Tier1 48,000 Grain High Efficiency Digital Whole House Water Softener with Under Sink Reverse Osmosis System - Everyday Series

DIGITAL METER HEAD CONTROL VALVE: LCD display, electric plug in, improved features, and ease of operation as compared to Fleck 5600SXT..
COMPLETE WATER SOFTENER and 5-STAGE REVERSE OSMOSIS SYSTEMS: Each system includes a brine tank, pre-filled mineral tank with 1.5 cubic feet of Cation....
ADDITION OF THE 5-STAGE REVERSE OSMOSIS SYSTEM: The Tier1 RO5 Under Sink Reverse Osmosis System features a continuous water flow and efficient....
SCALE REDUCTION: Protects fixtures, pipes, and appliances from harmful scale. Prevents damage from hard minerals such as calcium and magnesium....
SMART SPACE SAVING DESIGN: Its unique precision turbine meter is incorporated in the system bypass valve saving over 4 feet of floor space. 10 x 54....

Check Stock

1 Pack Blue Gas and Bung Wrench Non Sparking Solid Drum Bung Nut Wrench

New Blue Non-Sparking Gas and Bung Nut Wrench - 1 Pack.
Works on 15, 30, and 55 Gallon Drums ~ Open/Close emergency gas meter shut off valves.
4-in-1 Multi-Functional Tool - 1. Main Wrench - Opens Fine and Course thread Bungs on 15,30, and 55 Gallon Drums / 2. Back of Wrench - Turns off Gas Meter Shut off valves / 3. Handle - Opens 3/4" bung on smaller barrels.
Can be used to open the 3/4" bung on smaller barrels.
Fits most barrels and drums on the market today..

Check Stock

WORX TURBINE 12 Amp Corded Leaf Blower with Fit Gutter Cleaning Kit for Blowers

TURBINE fan technology delivers forceful, high-capacity air volume that is up to twice as fast as professional gas blowers.
Dynamic airflow design and Hyper-Stream nozzle for maximum performance, variable speed control to adapt to your outdoor cleaning challenges.
Universal adapter fits all major brands of gas and electric Blower/Vacs.
Safely clean gutter debris while standing on the ground. Maximum Diameter Up to 5 inches.

Check Stock

Forney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders

Combination of regulator and flow meter as one single stage piston design unit.
Provides accurate regulation of gas flow.
Impact resistant machined brass body, polycarbonate flow tube and outer cover.
Features regulator and flow meter in one unit.
Provides accurate regulation of gas flow designed for MIG and TIG applications.

Check Stock