Best Gas Solenoid Valve

K Thermocouple Terminal block Ceramic Insulator Kiln Temperature Sensor

➤ 【SIZE】— Thermal coupler total length 900mm, with five nuts gas parts thermocouple gas valve for gas..
➤ 【SAFETY】— Works with solenoid valve to prevent accidents happening, once gas leakage and gas burn out appears, it can put out..
➤ 【APPICATION】— The fireplace thermocouple suitable for induction cooker, gas stove, heating device and other burning appliances..
➤ 【FUNCTION】— Very simple and convenient to use. The gas fireplace thermocouple is designed for temperature sensing and measurement..
➤ 【SERVICE】—If you have any questions about quality and instructions during use, we will be happy to assist you..

Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
Solenoid-operated first automatic valve opens on thermostat call for heat.
Diaphragm-operated second automatic valve opens under control of regulator.
closes if gas or power supply is interrupted.

Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
Solenoid-operated first automatic valve opens on thermostat call for heat.
Diaphragm-operated second automatic valve opens under control of regulator.
closes if gas or power supply is interrupted.
All adjustments, wiring connections and pilot outlet are accessible from top of control.

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

[MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
[SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
[N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
[WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
[MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..

... Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
Attention. Suitable for North American CO2 cylinder with CGA320 adapter! Installation tools are included..

Electromagnetic modular design, can be disassembled and used alone.
Micro solenoid valve, the temperature is much lower than ordinary solenoid valve.
Unique structure design, fixed without wrench, freehand operation.
High precision structure, precision pressure gauge.
The interface is standard CGA320. This pressure gauge is suitable for filled gas cylinders only, not chemical CO2 cylinders..

VTEC Solenoid Spool Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effec....