Best Gas Fittings Key

Stanbroil Fire Pit Gas Burner Spark Ignition Kit – Including Push Button Igniter Gas Shut-Off Valve with Key

  • Dimensions of the Face Plate: 7" L*3 13/16" H, Base Plate: 7" L*3 13/16" H.
  • Kit contains Chrome Ball Valve with 3” Chrome Key, Spark Ignitor with Leads &Ground Wire, Stainless Steel Mounting Plate.
  • Ball Valve: 1/2 Female NPT*1/2 Female NPT, we include Two 3/8" Male Flared x 1/2 NPT Fittings for Your Convenience.
  • Easy to install, Perfect for your DIY gas fire pit.
Check Stock

Gas Connector Kit 24 inch Yellow Coated Stainless Steel, 3/8” OD Flexible Gas Hose Connector for Gas Log and Space Heater, 1/2" FIP x 3/8" MIP Stainless Steel Fittings, 24” Gas Appliance Supply Line

  • REINFORCED HEAVY-DUTY QUALITY: Our gas supply connectors are quality tested and CSA certified, to serve you faithfully for years to come. Gas hose withstands 30 bends without leakage and 15 applications of 90 degree twists. Works in temperatures up to 800 degrees. Fittings create a leak-free seal within a torque of 1,040 inch-pounds..
  • EASY INSTALLMENT: No special tools required to install this gas connector. Includes stainless steel corrosion-resistant fittings with threaded end connections which easily connect to your gas supply line, and create a secure, leak-free seal..
  • ONE YEAR WARRANTY: We stand behind our products to ensure only the best quality materials and product performance. We offer a 1 year limited warranty on all Highcraft gas connectors so you can be protected in case of any misfunction..
Check Stock

36 Feet 1/2-Inch Natural Gas Hose with Quick Connect Fitting for BBQ, Grill, Pizza Oven, Patio Heater and More NG Appliance, Propane to Natural Gas Conversion Kit - CSA Certified

  • 【Good quality】Material upgrade - The propane hose is made of high-quality rubber, And connected with 100% solid brass connector, Has very good weather resistance, It is anti-cracking, anti-rust and very durable, Comply with CSA certification.
  • 【Widely used】Has a very broad applicability, Perfect for Weber, Charbroil Grill, and more NG appliances, The hose kit is used to connect your natural gas grill to the natural gas supply.
  • 【Easy to Install】Very easy to use and flexible, With quick-disconnect brass fittings on both ends, it is easy to attach and remove this gas hose as needed.
  • 【Greater capacity】36FT 1/2 inch ID Natural Gas Hose - with 1/2 inch quick disconnect/connect plug x 1/2 inch bell mouth fittings, Supplies up to 135,000 BTU P/HR, provide adequate gas flow for grills and other gas appliance.
  • 【Quality after-sales】1 Year quality guarantee, If you have any questions or needs during the use of our natural gas conversion kit, you can email me at any time and I will give you the best answer. You do not have to bear any losses.
Check Stock

Keg Kit with 5 Gallon Ball Lock Keg, 5 lb Aluminum CO2 Cylinder, Regulator, and All Accessories

  • ... long homebrew gas line can be cut into multiple sections to meet your mutiple kegging needs perfectly..
  • Can be Easily Cut by Cutting Tool: the short length brewing hose kit can not be cut and it can not be applied to your multiple keg dispensing process simultaneously, or the fixed hose fitting kit comes with extra fittings and you need to spend extra money, this 15 feet gas line can be cut into any length to meet your needs, you can can equip it with your own brewing dispensing parts, brings great convenience and creative possibilities for your multi-kegging brewing dispensing system..
  • Powerful No Leaking Pressure Transferring Tubing: the inside diameter of this great long kegging dispensing hose is 7mm, thick enough hose wall prevents the gas tubing kinks and maintains hose shape stability, smoothly transmit gas without leakage with the help of hose clamps. you can attach this kegerator hose to the beer barb fitting connector that has an outside diameter of 5/16'' to transfer your brewing gas to your beer keg..
  • Great Versatility and Widely Used: MRbrew 15 feet gas hose can withstand the co2 gas pressure value that can be up to 70 psi, you can attach this hose to ball lock quick disconnect fittings to transfer brewing gas co2 for carbonating beer, kom....
Check Stock

D.N. Industrial Grade Yellow Plumbers Teflon Tape, Gas Line Pipe Thread Tape, Twice Longer and Higher Density (1.3 g/cm3) Propane Yellow Tape Perfect for Gas Fittings (1/2\

  • Size and Quality: D.N. 1/2 inch yellow plumbers Teflon tape Thickness is: 0.004” (0.075mm), Temperature Resistance: -190°C to 370°C, Water pressure resistance:16MPa, Tensile strength: ≥8MPa, Elongation: ≥25%.
  • High density: Yellow teflon tape density is 1.3 g/cm3 ( gram per cubic centimeter).
  • Material: Our plumber’s tape is made of PTFE material, which has high sealing and durability and gets CSA 20755, UL MH25811 approved.
  • Each roll of yellow Sealant Tape has a width of 1/2 inch which is suitable for for gas fittings. The length of this gas seal tape Model is twice longer as the same models.
  • plumbing tape has a sealing function to prevent the leakage, Yellow gas Sealant Tape Perfect for gas fittings.
Check Stock

Plumb Shop Brasscraft CSSL54-24P Stainless Steel Gas Dryer Connector, 24-Inch

  • Flexible stainless steel corrugated tubing with stainless fittings.
  • A.G.A. Approved for indoor or outdoor use according to ANSI Z21.24 and Z21.45. 1/2" Male I.P.S. X 1/2" Female I.P.S. Fittings.
  • Corrugated flexible Stainless Steel gas dryer connector.
  • Polymer coated, 1/2-Inch inside diameter, 5/8-Inch outside diameter, tube with fittings.
Check Stock

Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small

  • 5-piece universal gas-appliance hook-up kit.
  • Comes with everything needed for installing most gas appliances.
  • Includes 18-inch flexible gas line, 3 different couplings and on/off valve.
  • On/off valve provides easy servicing of appliances or summer shutdown.
  • Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

HOTaitai Portable Water Heater, 1.58 GPM 6L Propane Tankless Water Heater Portable Hot Water Heater for Outdoor Kitchen, Camping, Cabins, Barns, Black

  • ...ful. Anti-freezing protection, the drain plug can discharge the residual water inside to avoid freezing in cold areas or in case of long time idle. High-temperature protection, if the water temperature is over 75℃(167 °F), the unit will shut down automatically..
  • 【QUICK CONNECT GAS INLET】: Upgrade to gas quick fittings, only one step to install the gas hose, at the same time, with more safety for preventing any gas danger. And HOTaitai tankless water heater has compact size and folding handle allow for convenience to carry. With the portable handle, you can hang it into a hook or by using the mounting bracket on the top/back of the gas water heater. Install it in a few minutes..
  • 【LIGHTWEIGHT PORTABLE BODY】: Body size of the portable propane water heater: 17.3”*11.8”*5.3”, net weight: only 12 lb! And this 1.58 GPM portable tankless water can bring instant hot water for you when camping with your family, off-grid cabins, boating, horse trailers, stables or simply rinsing off by the pool. Also, you can wash your pets outdoor with this 1.58 GPM portable tankless water heater..
  • 【CSA CERTIFIED】:The gas quick fittings-CSA approved, to make sure no gas leaks risk when connection and simplify the connection without tools, install by one han....
Check Stock