Best Gang Saw Segments

Stadea CBW112H 4 Inch Diamond Concrete Masonry Hole Saw Core Bit For Concrete Masonry Brick Block Cutting Wet 5/8 -11 Threaded 14 High

  • 4 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch long Designed for drilling Concrete, masonry, brick, stone, and other soft to medium hard....
  • High Frequency Welded Diamond Segments for joint strength needed to cut concrete and other soft to medium hard materials effectively.
  • 14" High tube length, with 5/8"-11 arbor.
  • Designed to cut in wet, for longer life span use wet.
  • 9 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 4 MM thick and 24 MM wide.
Check Stock

SHDIATOOL Diamond Concrete Saw Blade V Segments Cutting Disc Dry or Wet Cutter 14 Inch bore 25.4mm

  • Diameter 14"(354mm) , 25.4mm/ 1" arbor, 20mm washer, have a pin hole for High-speed Power Saw or Walk-behind Saw.
  • Professional blade,high quality, suitable for cutting concrete ,brick etc..
  • The 10MM tall diamond segments provide maximum cutting life with the lowest cost per cut.
  • V-teeth Design improves sharpness, helps chip evacuation and heat dissipation.
  • Thickened Body Design,high hardness, good balance, strong and durable.
Check Stock

GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Diamond Saw Blades Segment Height 0.394” (10 mm) - 5 inches

  • UNIVERSAL - 5" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Curb. Our 5" angle grinder concrete blade can be used both for dry and wet cutting..
  • INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY - Diamond blade for granite and stone is designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS - GRAFF concrete diamond blade 5 has teeth with soldered diamond segments all around. Diameter: 5 Inch (125 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) Adapter, Cutting width: 0.079 Inch (2 mm), Segment height: 0.394 Inch (10 mm), Segments number: 9. Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

Stadea CBD106N Diamond Concrete Hole Saw 5 Inch Core Drill Bit For Concrete Brick Block Stone Masonry, Laser Welded Wet Dry 1 1/4-7 Thread

  • 5 Inch Diamond Concrete Core Drill Bit Hole Saw, 17 Inch Tall Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard materials.
  • Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively.
  • 17″ High tube length, with 1 1/4″-7 arbor, Fit known brand core drill rigs.
  • Designed to cut either in wet or dry use, for longer life span use wet.
  • 10 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 4 MM thick and 24 MM wide.
Check Stock

Archer PRO 12" in. Diamond Turbo Core Drill Bit for Concrete Drilling, Masonry, and Cinder Block Drilling - Use with Core Drill Stand Rig, Concrete Drill Bit, and Concrete Hole Saw.

  • FAST ⚡️ 10 mm turbo segments and Grade A diamond crystals for super fast drilling - Includes Concrete Drill Bit and Concrete Hole Saw..
  • RELIABLE Laser welded segments and thin wall steel core for reliability.
  • Medium bond for general purpose drilling a wide range of construction materials.
  • VERSATILE ⭐️ Suitable for both dry and wet use.
  • FOR CORE DRILL stand rig with 1-1/4 in. -7 Spindle.
Check Stock

Stadea CBD113N 3 Inch Concrete Hole Saw Core Diamond Drill Bit 3 Inch For Concrete Brick Block Stone Masonry Laser Welded Wet Dry 1 1/4-7 Thread

  • 3 Inch Diamond Concrete Core Drill Bit Hole Saw, 14 Inch high Designed for drilling hard Concrete, Rebar, masonry, hard brick, Granite, and other hard....
  • Laser Welded Diamond Segments for extra joint strength needed to cut hard concrete and other hard materials effectively.
  • 14" High tube length, with 1 1/4"-7 arbor, Fit known brand core drill rigs.
  • Designed to cut either in wet or dry use, for longer life span use wet.
  • 7 Pieces diamond Segments with high diamond concentration. each segment is 10 MM High, 3.5 MM thick and 24 MM wide.
Check Stock

DocaPole 7-30 Foot Telescoping Extension Pole + GoSaw Attachment Pruning Pole Saw; Extendable Limb Saw and Trimmer For Tree Pruning on Branches Less than 2" Diameter; Includes Feather Duster

  • 2X Strength Tree Saw with Pole For Branches Less than 2" in Diameter: This telescoping tree pruner pole saw is designed for pruning and is our best high-reach dual-use pruning saw on the market.
  • Thumb Lever Clasps to Maintain Reach: Extend to needed length for branch, then tighten screws with screwdriver to prevent pole slippage. Screws can also be used to adjust thumb lever tension.
  • High Reach Tree Pruning Tools: 36 feet of trimming reach so you never need a ladder again. For best results and to reduce flex, always extend and use the thicker lower pole segments first..
  • Let The Saw Do The Work: Focus on back and forth cutting motions with the pole pruner and to minimize bend. High-quality aluminum telescoping pole features a universal threaded tip that can be used with a wide variety of attachments.
  • Razor Sharp 13 Inch Bi-Directional Blade With 3X Tooth Design: Our Dual-use saws can be used as pole saws for trimming or as hand-held for low pruning. Saw has sturdy, lightweight handle.
Check Stock

DocaPole 6-24 Foot Double-Duty Telescoping Extension Pole + GoSaw Attachment Pruning Pole Saw; Extendable Limb Saw and Trimmer For Tree Pruning for Branches Under 2\ Diameter; Includes Feather Duster

  • 2X Strength Tree Saw with Pole For Branches Less than 2" in Diameter: This telescoping tree pruner pole saw is designed for pruning and is our best high-reach dual-use pruning saw on the market.
  • Thumb Lever Clasps to Maintain Reach: Extend to needed length for branch, then tighten screws with screwdriver to prevent pole slippage. Screws can also be used to adjust thumb lever tension.
  • High Reach Tree Pruning Tools: Plenty of trimming reach so you never need a ladder again. For best results and to reduce flex, always extend and use the thicker lower pole segments first..
  • Let The Saw Do The Work: Focus on back and forth cutting motions with the pole pruner and to minimize bend. High-quality aluminum telescoping pole features a universal threaded tip that can be used with a wide variety of attachments.
  • Razor Sharp 13 Inch Bi-Directional Blade With 3X Tooth Design: Our Dual-use saws can be used as pole saws for trimming or as hand-held for low pruning. Saw has sturdy, lightweight handle.
Check Stock

4.5 inch Circular Saw Blade, Firecore Segmented Diamond Saw Blade for Angle Grinder Dry or Wet Concrete Cutting Wheel Disc for Concrete Stone Brick Masonry Tile

  • SPECIFICATIONS: Firecore concrete saw blade has teeth with soldered diamond segments all around. Diameter: 4-1/2 Inch (115 mm).
  • Arbor: 7/8 Inch (22.23 mm) with 20 mm Adapter.
  • Segment Height: 0.276 Inch (7 mm). Suitable for Angle Grinders, Circular Saws, Masonry Saws, Tilesaw and Gas Cutoff Cutters..
  • FAST & SMOOTH CUTTING: Universal for dry or wet cutting. With Max 12,200 RPM, this diamond circular saw blade are produced specifically for use with general masonry materials such as concrete, roof tiles, stones, bricks and rocks..
  • INCREASED OPERATING TIME: Concrete blade for angle grinder heats up slower to prolong the operating time..
  • DURABLE: Made from high-quality superabrasive diamond, this cutting saw blade offers the best combination of cutting speed, long life and a low cost per cut..
  • WIDE APPLICATION: Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or work at your home studio, this circular saw blade tool is the perfect blade for you..
Check Stock