Best Gamemax Power Supply 850ws

SHNITPWR 5V DC Power Supply Adapter 60A 300W AC to DC Converter Transformer 5 Volt 60 Amp LED Driver 110V / 240V AC Input for WS2812B WS2811 WS2813 SK6812 LED Lighting Project CCTV System Radio

  • Universal switching mode power supply. Input: AC 110V / 220V, 50 / 60Hz.
  • Output: DC 5V, Max 60A, 300W. The default output voltage is 5V DC, but it can be regulated by 10%, from 4.5V to 5.5V. Three sets of output channels available..
  • It can supply with all amperage less than 60A. ---such as 1A, 8.5A, 18A, 30A, 40A, 60A. For example, if your device draws 50A, then 50A will be supplied. If draws more than 60A, only 60A will be supplied and power supply will be damaged soon. NEVER OVERLOAD!.
  • Certified by FCC CE ROHS. We focus on producing high quality power adapters. No noise, low temperature operation, no spontaneous combustion, no explosion, no fire hazard, stable output. Automatic overload cut-off, over voltage cut-off, automatic thermal cut-off, short circuit protection..
  • Compatible: WS2812B WS2811 WS2801 APA102 SK6812 WS2813 LED Strip Pixel light/ USB-HUB / Graco Swing / Home Phone System / VoIP Phone Router / Serato DJ Controller / Nextbook / Webcam Router / Toy / Recorder / Bluetooth Speaker / Scanner / DVR / Hard Disk Box and other 5v devices less than 100W..
  • There is built-in cooling fan, which makes heat dissipation more efficient. 30 days money back guarantee, 18 months exchange. If there is any issue, please feel free to contact us. We will happ....
Check Stock

BTF-LIGHTING AC100-240V to DC5V20A Max100W Suit DC5V1A~DC5V20A Switching Power Supply Device Transformer Power Adapter Converter Jack for WS2812B WS2811 WS2813 SK6812 etc LED Strip/String/LED Matrix

  • ... porous metal shell, good heat dissipation performance, small size, strong performance stability, only support indoor use..
  • Make sure your device match the 5V voltage and wattage less than 100W. Please don’t run it overload .The max use should be no more than 80% of the full loads,otherwise, It‘s cause the power supply to overheat,the service life of the power supply will be greatly shortened.We recommend you to use this 5V20A 100W power supply to power devices less than 80W..
  • Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection. Enough 100W output power and 5V stable output voltage will protect your electronic products from destruction..
  • It is perfect for all 5V projects, such as WS2812B / WS2812B ECO / WS2811 / SK6812RGB / SK6812RGBW / WS2813 / SK9822 LED Strip / LED Pixel LED Matrix / LED String / LED fairy string / LED Matrix / CCTV Camera / Security System / Computer Project, etc..
Check Stock

BTF-LIGHTING AC100-240V to DC5V60A Max300W Suit DC5V1A~DC5V60A Switching Power Supply Device Transformer Power Adapter Converter Jack for WS2812B WS2811 WS2813 SK6812 etc LED Strip/String/LED Matrix

  • ...als, porous metal shell, good heat dissipation performance, small size, strong performance stability, only support indoor use..
  • Make sure your device match the 5V voltage and wattage less than 300W. Please don't run it overload .The max use should be no more than 80% of the full loads,otherwise, It's cause the power supply to overheat,the service life of the power supply will be greatly shortened.We recommend you to use this 5V60A 300W power supply to power devices less than 240W..
  • Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection. Enough 300W output power and 5V stable output voltage will protect your electronic products from destruction..
  • It is perfect for all 5V projects, such as WS2812B / WS2812B ECO / WS2811 / SK6812RGB / SK6812RGBW / WS2813 / SK9822 LED Strip / LED Pixel LED Matrix / LED String / LED fairy string / LED Matrix / CCTV Camera / Security System / Computer Project, etc..
Check Stock

BTF-LIGHTING WS2812B WS2811 2.4G WiFi Music SP511E SPI Controller Google Home/Alexa Timer Mode with Dual Signal Output 900pixels/port for LED Module Pixel Strip Light APP/3Key Button/IR Remote Control

  • ...controller control 900 pixels/port max . The APP is Fairy Nest. This controller only support 2.4G WiFi network.Can't support 5.0G WiFi network. Only support 2.4GHz WiFi.If the WiFi is 2.4G/5.0G, please set the router to be divided into two WiFi, one is 5.0GHz and the other is 2.4GHz.
  • DC5V LED strip,Must use 5V power supply.For example LED strip is DC5V WS2812B , you must use DC5V power supply . The voltage depends on LED strips. Don't use DC12V power supply for DC5V WS2812B pixel strip..
  • Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green You can use the APP to calibrate the colors to make them consistent..
  • Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, remote cannot be used, and the WiFi is disconnected . Please note : When you Light up 1 colorred or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED .If you don't know which power supply can be used for your LED project, you can email us..
  • It is not recommended to light up the full brightness white light for a long time, because the main function of the addressable RGB IC light strip or fairy string i....
Check Stock

Full Version USB Hart Modem WS232UP Hart -USB Modem Hart Transmitter with Built-in 24VDC & Loop Resistor for All HART Device

  • The Latest Full Version USB HART MODEM WS232UP, With Built-in 24V DC & Loop Resistor, Windows XP/7/8/10 Support, Suitable For All Devices Which Support HART Protocol, etc..
  • The WS232UP USB-HART Modem provides a complete and flexible PC communication link to HART networks and power kit and loop resistor, for commissioning, servicing, calibrating, or acquiring data from any HART instrument or transmitter. The WS232UP is developed based on BELL202 modem standard, this external interface is rugged and compact and ideal choice for field service, commissioning, engineering, training, table top shows, lunch and learns and demo cases..
  • Fully HART compliant for communication with any HART instrument and error-free slave testing * DC-DC isolation power draws from USB port and needs no external power supply.
  • * Three modes: 1) 24VDC/270Ω. 2) Normal. 3) 270Ω. The mode is easily slide-switch selected so you’ll always have a power supply or loop resistor with you * Easy installation and use, this modem can power all 2-wire HART devices-independent of supplier.
  • * Rugged aluminium alloy case gives you industrial-grade reliability in a small package * Free HART application software for you to configure your HART device * Smart Design, smaller than a normal name card.
Check Stock

BTF-LIGHTING WS2812B WS2811 WS2813 SP107E Music Bluetooth Full Color Controller iOS/Andriod App Control Support Almost All The LED IC Chip Suit for LED Strip,Matrix Panel,Module Buli-in Mic/AUX Input

  • AUX Input and Built-in microphone.The first mode is 3.5mm audio input.It can block out the outside world . The second mode is the built-in mic. It captured the sound of the outside world. The Sensitivity of two modes can be easily adjusted.If your LED light is 5V,please use 5V power supply..
  • Suit For led Strip and LED Matrix Panel .Compatible with many LED driver IC except the no IC chip led strip. It is also suitable for many DIY projects.You can set up number of segments and pixels number of each segment according to the LED pixels array of your lights. This feature is perfect for LED matrix. or other DIY project..
  • 30+18+180 Kinds Of Lighting Effect .There are 30 kinds of music lighting effects for LED matrix panel ,18 kinds of music lighting effects for led strip .180 kinds of non-music lighting effects . Music mode and non-music mode can be arbitrarily changed. It can play lighting effect automatically. Control max 960 IC chips..
  • Supports RGB RGBW IC types and is compatible with almost every kind of one-wire or two-wire LED driver IC , such as WS2812B,WS2811,WS2813,WS2814,WS2815,SK6812RGB,SK6812-RGBW, APA102, WS2801,SK9822, LPD8806 etc strip light .WS2812B 8X8 ,8X32 ,16X16 ,22X22 LED matrix ..
  • Adjustable . The speed , the brightness ,the number of pi....
Check Stock

UpBright AC/DC Adapter Compatible with Samsung SLPS-250FFOT DJ44-00005B DJ44-00005A Powerbot 7000 VR7000 Series R7070 R7090 R7040 R7010 R7065 SR1AM70 SR2AM70 R7260 VR2AR72 Robot Vacuum Battery Charger

  • ...msung SLPS-250FFOT SLPS-250FF0T DJ44-00005B DJ44-000058 DJ4400005B DJ44000058 DJ44-00005A DJ4400005A fits Powerbot Power bot 7000 VR7000 Series R7070 R7090 R7040 R7010 R7065 Star Wars Limited Edition – Darth Vader & Stormtrooper Robot Vacuum Robotic Cleaner Vac 24.9V 1A DC24.9V 1000mA 24.9VDC 1.0A Switching Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU ((((( NOTE ! Charging Dock Station - not included ))))).
  • Compatible with the following vacuum models: Samsung Powerbot 7000 VR7000 Series Star Wars Limited Edition – Darth Vader & Stormtrooper Robot Vacuum.
  • Samsung PowerBot R7010 SR1AM70 SR1AM7010UW VR1AM7010UW/AA SR1AM7010U5 VR1AM7010U5 VR1AM7010U5/AA 21.6V 80W Li-ion Robot Vacuum.
  • Compatible with: Samsung POWERbot 7040 R7040 SR1AM7040WG VR1AM7040WG VR1AM7040WG/AA VR1AM7040W9/AA VR1AM7040W9-AA Robot Vacuum.
  • Samsung Powerbot R7065 SR2AM7065WS VR2AM7065WS/AA 21.6 V 130W Li-ion Rechargeable Battery Robot Vacuum Cleaner.
  • Samsung POWERbot SR1AM70**** SR2AM70**** Series SR1AM70 SR2AM70 SLPS-601FCOT Supply Unit 24.6V 2.5A Power Supply Cord Charger.
  • Compatible with: Samsung Powerbot 7070 R7070 SR2AM70SR2AM7070WS VR2AM7070WS/AA VR7000M SR20M7070WS VR20M7070WS/SA 21.6V 130W Li-ion Pet Robot Vacuum Cleaner.
  • Samsung POWERbot 7090 R7090 VR2AM7090....
Check Stock

DC 5V 2A 2000mA Power Supply Cord Charger Multi Tips 10W AC Adapter with 8 Selectable Multiple Switching Connectors for TV Box LED Lights Strip Tablets Webcam Camera Speaker Router Transformer ect

  • ...Output: 5V 2A/2000mA Max (Also Compatible with 1.5A 1A 650mA 100mA, 200mA, 300mA, 400mA, 500mA, 600mA, 700mA, 800mA, 900mA, 1000mA, 1.2A, 2A 1 1.5 2 Amp or lower devices)；Wire length: 1.8m / 74in approximately 6 Ft.
  • Connector: 5.5*2.1mm Polarity: positive (+) center.
  • 【Widely Used & Application】This DC 5V power supply works for most 5 Volt Devices. Such as for bluetooth speaker, for Scanner, Graco Swing, WS2812B WS2811 SK6812 WS2813 WS2801 LED Strip Pixel Light, Router, Bluetooth Speaker, Raspberry pi 3, Webcams, HUB, Baby Monitor, Camera, Android Tablets Phones, Recorder, Home IP Phone System, Serato DJ controller, Recorder, GPS, DVR, Toy, Hard Disk Box / HDD, Roku streaming media player, Projectors, Audio / Video and more 5V home appliances..
  • 【1 Replace All Adapter】One adapter can solve all your troubles.Come with value $8 Gift 8 tips connectors : USB Type-C / Micro-USB / Mini-USB / 5.5*2.5mm / 4.0*1.7mm / 3.5*1.35mm / 3.0*1.1mm / 2.5*0.7mm. Meet your more requirements and providing you more charging choices. Save your money and room. (Please DOUBLE CHECK the Volts, Current and DC jack dimensions to ensure the compatibility).
  • 【Safety I/C Chip Technology】Protect Your Device with Mutil-Protection: OverCurrent / OverVoltage / OverHeat / Shor....
Check Stock

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

  • Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply must be able to supply 2A. The reason is that the GPRS Shield startup current and the maximum top current required to work up to 2A, but the USB port can not provide such a large current, so the external power supply equipment must be provided..
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers..
  • Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default). Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
Check Stock