Best Fuel Injection Test Bench

OTC 6550PRO Professional Master Fuel Injection Service Kit

  • Perform fuel pressure testing diagnose weak fuel pumps or restricted filters test for fuel flow and perform leak-down tests.
  • 0-100 pounds per square inch fuel pressure Gauge.
  • 47 OTC fuel injection system adapters each with a quick connect Schrader Valve.
  • 1997-2008 fuel injection service application manual.
Check Stock

JIFETOR Fuel Injector Pump Pressure Gauge Tester Kit Automotive Gas Gasoline Fuel Oil Injection Test Tool Set 0-140PSI with Schrader Adapters Universal for Testing Auto Car Truck Motorcycle

  • FUEL PRESSURE TEST KIT: The universal fuel pressure tester tests if the fuel supply & injection system work normally, help to judge if there are....
  • UPGRADED FUEL PUMP PRESSURE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up....
  • 140PSI/10BAR PRECISION-MACHINED FUEL PRESSURE GAUGE TOOL: You just need to ensure there is an adapter in the kit suitable for your test port or the....
  • CHECK FUEL INJECTOR PUMP PRESSURE: Proper fuel pressure is vital for engine operation and performance. No matter higher or lower fuel pressure can....
  • SATISFACTORY CUSTOMER SERVICE: This fuel injection pump pressure test kit helps to find most auto fuel system issue, it is a must have kit for DIYer....
Check Stock

Diesel Fuel Pressure Gauge Kit, TU-114 Petrol Diesel Fuel Pressure Gauge Tester Fuel Injection Pump Diagnostic Tool, Diesel Diagnostic Tool

  • FUEL PRESSURE TESTER: Complete fuel pressure gauge auto diagnostics tools is designed to easily detect the fuel pump pressure on injector systems, and check if fuel pump is defective or inconsistent in pressure flow. Kit includes copper adapter and fittings for modern Schrader test port fuel injection systems..
  • ACCURATE READING: The 90mm fuel pressure gauge tester features a shockproof rubber casing and a large dual-scale dial with readings in both psi (to 140) and bars (to 10) for easy and accurate work on both American and metric systems..
  • SAFE TO USE: The fuel pressure test kit are fitted with quick coupling systems and safety valves. The pressure release valve fitting with long drain hose helps to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel, easy to use..
  • QUALITY MATERIALS EASY TO STORAGE: High-quality copper alloy for durable strength.
  • the rubber hoses endure torsion and temperature and pressure extremes to ensure safe use. The fuel injection pressure tester kit with plastic blow-molded case can keep the tools organized, safe storage and easy to transport..
  • QUALITY ASSURANCE: The most reliable fuel injection testing tools. Our all products have a 18-Month WARRANTY, if you received wrong tester kit or it....
Check Stock

FAERSI Fuel Injection Pressure Test Kit - Universal Fuel Oil Engine Diagnostic Gauge Tester Set with Fittings, Instructions, Storage Case for Car Motorcycle Truck RV SUV & ATV, 0-100 PSI / 0-7 Bar

  • 【Special Design】: Complete Universal Fuel Injection Pressure Tester Kit is designed to easily detect the fuel pump pressure on injector systems, and check if fuel pump is defective or inconsistent in pressure flow.【Note】Our all products have a 18-Month WARRANTY, if you received wrong tester kit or it doesn't work, please feel free to contact us and we will give you a REPLACeMENT or REFUND..
  • 【Universally Compatible】: Suitable for any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Ideal for petrol engines of American Motors, Boschs AFC, MPC European & Japanese (except CIS), Chryslers Corp., Fords Motor Co., GMs (except TBI), Japanese fuel injection systems and so on..
  • 【Easy to use and Safety】: The pressure release valve fitting with long drain hose helps to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel, easy to use 【NOTE】The Gauge kit don't include a push pressure release button..
  • 【Easy to storage】: The Fuel Injection Pressure Tester Set with a ABS plastic blow-molded case can keep the tools organized, safe storage and easy to transport..
  • 【Package Include】The Fuel Pressure Test Kit has all necessary fittings....
Check Stock

KZYEE KM50 Power Circuit Probe Kit - 12V\\/24V Automotive Circuit Tester for Frequency, Duty Cycle, Fuel Injection Circuit, AC\\/DC Resistance, Digital Voltage, Activate Component Electrical System Tool

  • [More Accurate Probe Tester] - The KZYEE KM50 Power Circuit Probe Kit is an improved version of the KM10 (DC voltage, AC voltage, resistance and diode). It also has the latest improved functions for testing signal frequency, duty cycle and fuel injection. With such a versatile tool, the technician can trace and identify the problem circuit and rule out good circuits, speeding up the diagnostic process and revealing the true cause of the electrical problem much easier..
  • [3 Advanced Testing Modes] - If the vehicle has difficulty starting, acceleration, fuel consumption, etc., it’s necessary to check the fuel injection system. KM50 Fuel Inject Test is specially designed for quick and easy diagnosis of fuel injection circuit. It can be quickly connected to the circuit and displays all the information needed. The addition of Frequency and Duty Cycle modes, gives KM50 the most value than others..
  • [Additional Piercing Probe] - The probes are fully insulated which provide added protection. If you don’t want to disconnect cables to find the connectivity and electricity, use piercing probe kit, you can test the signal in a simple way without damaging the cable..
  • [Activate Components] - With the ability to power components such as radiator fans, starters....
Check Stock

JoyFans Fuel Pressure Test Kit, TU-114 Fuel Injector Pump Pressure Tester Automotive Tool with Gauge Adapter for Schrader Test Port Fuel Injection System on Car Motorcycle Blue Case

  • Quick Inspection of Fuel System: Fuel pump pressure tester kit is used to make comprehensive fuel system check and fault diagnosis on fuel supply and fuel injection pump pressure. Quick installation and easy access to pressure readings. Automotive fuel injector tester has a 1/4" SAE female brass fitting at end of the hose, can be inserted directly into the fuel pump's standard Schrader or fuel pressure test port, or installed a tee fitting on to help splice an in-line connection..
  • Safe Fuel Recovery: Fuel pressure gauge features shock-resistant rubber housing and dual color scale dial, ranging from 0-10 bar (0-140 psi) for easy and accurate work on both American and metric systems. High precision 3-1/2" gauge easily holds pressure values and has convenient pressure reset button with 16" drain hose for safe fuel recovery. 15" built-in flexible hose adapter has 300 psi W.P, can be connected to fittings for fuel pressure test..
  • Scope of Application: JoyFans fuel injection pressure tester kit covers a variety of gasoline engine cars, motorcycles, trucks, SUVs, ATVs, RVs with modern Schrader test port fuel injection systems but Bosch, CIS Jetronic, Throttle Body System on GM vehicles. Custom-made toolbox bases on the shapes and sizes of all tools to keep th....
Check Stock

Adorish 0-140PSI Fuel Injector Injection Pump Pressure Tester Gauge Kit Fuel Pressure Test Kit TU-114 for Auto Car Truck SUV Motorcycle ATV RV

  • Application: Fuel pump pressure tester is suitable for various gasoline engines such as cars, trucks, SUVs, motorcycles, ATVs, RVs (except Bo-sch, CIS Je-tronic, GM car throttle body systems), not suitable for diesel high-pressure injection pumps or direct injection engines..
  • Fittings & Hoses: M8/M10/M12/M14 adapter for corresponding fuel Test port on rails.
  • 15"L hose for direct connection to 1/4" SAE standard US valve on the fuel pump.
  • Aluminum tee helps in-line splicing between the fuel pump and engine on most vehicles..
  • Fuel Pressure Gauge: A large 3-1/2" dial protected by a rubber cover, a 0-140psi/0-10bar range, and a two-color coded scale for easy reading..
  • Material: Made of high-quality brass, steel, rubber, plastic, provide accurate reading and long-lasting products..
  • Storage: Nice carrying case and a well-made tool, great for DIY or even professional use..
Check Stock

Fuel Pressure Gauge Kit,0-140 PSI Fuel Pump Tester,Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools Gasoline Tester Tool

  • ...and corrosion.Durable plastic blow-molded case to protect components and provide easy transport and organization,Items are protected well in a sturdy case..
  • 【REGULAR CHECK FUEL INJECTOR PUMP PRESSURE】 High or low fuel pressure can cause many engine problems.It is mainly used to test whether the fuel supply and injection system are working normally, and to determine whether the internal components are damaged or the oil circuit is faulty. You can troubleshoot possible problems based on the vehicle manufacturer's user manual..
  • 【AFTER-SALES SERVICE】Package Included: 1x Fuel Injection Pressure Tester, As Picture Shows.Enclosed with an instruction manual.Note: Not for diesel high pressure injection pump or direct-injection engine.Buy with confidence, We provide 6 months warranty service, if you have any questions, please feel free to contact us via email.We will solve it for you as soon as possible..
Check Stock

Lisle 55700 Master Fuel Injection Test Set

  • Set checks fuel pressure on most Port Fuel Injection (PFI) and Throttle Body Injection (TBI) systems.
  • Adapts to work with test port connections, end of hose connections and in-line connections.
  • List of component parts included with instructions.
  • Tests GM, Ford, Chrysler, Honda/Acura, Toyota, Bosch CIS and L-Jetronic.
  • Comes with a variety of adapters and gauges for checking many types of systems.
Check Stock