Best Front Camera Flex Cable With Adhesive

BIGTREETECH Upgrade PI TFT70 TFT LCD Display DSI 800x480 for Raspberry Pi Model 3D Printer Controller 7in Capacitive Touch Screen 165X100mm

The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
Feature: the fit for Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be....
Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to for Raspberry Pi camera and another end with 15 Pin 1.0mm....
Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..

Check Stock

Fixcracked for Touch Screen Replacement Parts Digitizer Glass Assembly Ipad 3 + WiFi Antenna Cable & Professional Tool Kit (Black)

Compatible only with iPad 3 (3rd Gen) Model: A1403, A1416 and A1430 (All Wi-Fi + Cellular Carriers).
Includes x1 BlackTouch Screen Glass Assembly Replacement + x1 Repair Toolkit + s + x1 Midframe Bezel + Wifi Cable.
Free Middle bezel and Wifi Antenna offered,When you remove your old screen they are easy damage the bezel but no worry we have a replacment for it..
This part makes installing a front panel assembly easier with the adhesive, front facing camera bracket, and blank home button already installed.（the adhesive is on the black part of the back of the screen, the outer layer needs to be removed for use）.
Come with High Quality DIY free tools for repair..

Check Stock

Tailgate Emblem W/Reverse Backup Camera Replacement for 2004-2016 Ford F150 F250 F350 F450 F550 Flex (2009-2012) Rear Backup Camera W/Guideline | Night Vision | IP69 Waterproof

【NOTICE】This emblem backup camera is aftermarket and will NOT work for FACTORY & OEM monitor and please measure your space and emblem before purchasing.
【FITS】Replacement for 2004-2016 Ford F150 F250 F350 F450 F550 Flex (2009-2012),the tailgate emblem backup camera fits like OEM..
【INSTALL】This backup camera can be connected to any aftermarket monitor with a Yellow RCA input. There was plenty of cable to reach the front of the truck,On some older models, you may need to drill a small hole in your tailgate to run the wiring through..
【CAMERA】HD wide-angle camera with 0.1Lux sensitivity to enhanced night visibility, it is very useful while reversing your truck and trailer. IP69 Waterproof, work normally even in bad weather..
【WARRANTY】We provide 180 days warranty. During the warranty period, if you have any questions, please contact us first, and we will provide you with a new replacement..

Check Stock

Aokin for Raspberry Pi Camera Cable, FFC Cable Ribbon Flex Extension Cable 15 Pin 1.0mm Pitch for Raspberry Pi, Octoprint Octopi Webcam, Monitor 3D Printer, etc, 50cm/19.68in

The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
Feature: the fit Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be flexible with camera placement..
Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to Raspberry Pi camera and another end with 15 Pin 1.0mm Pitch interface to Raspberry Pi board..
Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
also use for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc. Model: FFC.
If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..

Check Stock

DENTURE DART V2 (Denture Adhesive Removing Toothbrush) (Red)

EASY ADHESIVE REMOVAL: Our patent pending bristle design grabs the denture adhesive and makes removing it a breeze. The HARD plastic bristles do not flex and smear denture adhesive. Even from tough areas like the roof of your mouth. This product is NOT LATEX. This product is NOT SILICONE..
SAVE TIME: Our tool helps get your life back by saving you significant time over the traditional denture adhesive cleanup process. Working from back to front, dislodge denture adhesive with the spanning legs, from inner and outer, upper and lower, gum line, and remove with the bristled head..
EVEN ON GUMS: Use the structured spanning legs to aid in removal of adhesive that collects right along your gum line..
DON’T FORGET THE ROOF: Flip it over and use the specially designed ‘fingernail’ ridge to dislodge the denture adhesive from the roof of your mouth, working front to back. Then flip it over and use the bristled side to remove the denture adhesive, working back to front..
RINSE and REPEAT: Made from a HARD versatile recyclable plastic here in the USA, you can use your DART again and again. Simply clean with warm soapy water and a stiff toothbrush!.

Check Stock

Upgraded 10'' Mirror Dash Cam Rear View Mirror Camera Front and Rear 1080P Backup Camera FHD Full Touch Screen w Loop Recording, G-Sensor, Parking Monitor 170° Wide Angle

√【Newest Upgrade】10 Inch Mirror Dash Cam Streaming Media Full Touch Screen dash cam, Both 1080P front and 1080P rear camera, Super night vision, Long 10 meters backup camera cable, support 128G SD card max (not included)..
√【Dual 1080P+10 meters long camera cable】Upgrade both 1080P backup camera and long camera cable, our unique 10 meters back camera cable(32.8ft), help you solve the short camera cable issue when installation. Both 1080P front and 1080P backup camera provide great video quality, No longer worry about not seeing clearly other license plates. Real-time transmission of images, full-screen view, the mirror dash cam with wide angle lens eliminates blind spots..
√【Super Night Vision & Safe Parking】 Analogy High Definition of backup camera, both 1080P front and 1080p backup camera presents super night vision in low light conditions, and the backup camera display with guidelines assist you safe parking. It is flexible and convenient for you to adjust the view angle by scrolling up and down on the touchscreen and switch the camera back and forth..
√【Thoughtful User Interface & Powerful Functions】Thoughtful and friendly user interface for you to operate. The brightness can be adjusted by slide left and right on the screen.....

Check Stock

UNITOPSCI Portable Car Stereo Wireless Apple CarPlay Android Auto Voice Assistant 9.3 Inch Touchscreen Bluetooth Car Radio Receiver 32G TF GPS FM Split Screen DVR for Cars RV Truck

...B SD card, which is inserted in monitor already.
【Portable Car Stereo Receiver】Car player supports 7-32V voltage, there's no restriction on vehicles, both cars and trucks can be used. FM Radio receiver, bluetooth for handsfree calling and Audio Streaming. Full touch screen design, our CarPlay Radio with the self-adhesive bracket, you can secure it to dashboard. Bracket can rotate 360 degree, adjust the position and vision you need at will.
【9.3 inch Touchscreen CarPlay Screen Player】 Portable Bluetooth car stereo supports backup camera input, compatible with 720P/1080P HD camera. (Backup Camera Not Included, you can order this camera and extend cable for the portable radio: B0BXNSNDB9, B0BXNWH4HJ), Use it as a backup camera system for car or truck, has split screen ability with two-way video Input, you can watch single image or split screen for dual view.
【Multifunctional Player】This wireless carplay screen has built-in speaker, portable wireless carplay and wireless android auto screen, you can transfer it to your car's speakers by FM radio transmitter when you want louder sound. Supports loop recording, voice control and bluetooth music. Comes with 32G TF card for safe video recording.

Check Stock

GoPro Hero5 Session

The GoPro Hero 5 session includes: Hero5 session camera, standard frame, curved adhesive mount, flat adhesive mount, mounting buckle, and an USB c....
To charge your camera, use USB cable and a computer or charge device manufactured by GoPro.
Additional GoPro Hero5 session features + benefits below on item page.
Photos are captured at 10 mp with a 4:3 aspect ratio.
A single press of the shutter button powers the camera on and starts recording automatically.
Refer user manual and installation manual below for software update instructions.

Check Stock

WiFi Antenna Flex Cable for iPhone 11 Pro Max - MEEFIX WLAN Bluetooth Signal Connection Ribbon Replacement Part

【WITH GLUE】 This WiFi Antenna Flex Cable comes with adhesive.
【COMPATIBILITY】It is compatible with iPhone 11 Pro Max (6.5 inch).
【FIX PROBLEM】The Accurate Replacement part is used to fix prolem of no WiFi signal, weak signal or can not receive WiFi signal.
【EASY TO BE INSTALLED】Just connect to motherboard, it is not need to be soldered when replace this WiFi Antenna Flex Cable.
【ONE YEAR WARRANTY】Our Products Provide 6 months Money Back Guarantee, and 1 year replacement warranty.

Check Stock