Best Ford Focus Clutch Bleeding Tool

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.

Check Stock

NexADD Fan Clutch Wrench Set 32mm & 36mm Water Pump Holder Tool Fit for BMW Ford GM Chevrolet,Fan Clutch Nut Wrench Set,Fan Clutch Removal Tool,Water Pump Pulley Holder,Clutch Fan Removal Tool Kit

REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES ★- The NexADD 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans. The holder bar keeps the water pump pulley in place while loosening the radiator fan. It is a direct replacement and completely fit, wich could help you save much money..
FITS YOUR VEHICLE★-The NexADD Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to,the following applications: fan clutch wrench tool is kit compatible with BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and compatible with Ford.Also compatible with some Ford, GM, and Chevy models..
BUILT TO LAST★- The 15" fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily. The rubber handle covered in the middle helps prevent hand fatigue during prolonged us..
EASY TO USE ★- Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clock....

Check Stock

Phoenix Systems (2003-B) V-12 Reverse Brake & Clutch Bleeder Kit, Medium Duty One Person Bleeder, Hard Case

Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..

Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.

Check Stock

Mekar Pneumatic Fan Clutch Wrench Set Clutch Removal Tool Kit Compatible with Jeep, Ford, GM,Chrysler

【Fitment】: Compatible with Ford, GM, Chrysler and Jeep vehicles (Kindly note: please make sure the size you need before purchase).---Product quality has been upgraded, please rest assured to buy. Support one-year warranty..
【High Quality Material】: Made of 1/4" thick steel, durable and high strength, Corrosion and rust resistance..
【7 Driving Wrenches Sizes】: 7/8", 32mm, 36mm, 40mm, 47mm, 1-7/8" and 2" (the slim new 47mm wrench tool is suitable for Ford 6.0L and 6.4L Powerstroke diesel pickup trucks), comes with a Storage bag, which is easy to store and carry..
【Function】: When servicing the water pump or fan clutch, our special tool can easily remove and install the fan clutch. You can install it around the clutch and release the clutch by quickly pulling the trigger, and finally releasing it (Kindly noted: use with an air hammer)..
【Package Included】: 7*Wrenches + 1*Storage bag. ------Guarantee: Any problem about the product, please feel free to contact us. Support one-year warranty and return service.(Including return and refund service).

Check Stock

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..

Check Stock

43300 Pneumatic Fan Clutch Wrench Kit Removal Tool Kit Compatible with Ford/GM/Chrysler/Jeep

Compatible with Ford, GM, Chrysler & Jeep, fit for 4.3L, 5.0L, or 5.7L GM pick up (van, mini-van, or SUV). (Please ensure correct size before purchase)..
Includes 7 driving wrench sizes: 7/8", 32mm, 36mm, 40mm thin, 47mm, 1-7/8", and 2" to fit Ford 6.0L and 6.4L Powerstroke diesel pickup..
Easy to use,simply slip the tool into the air hammer, select the correct wrench size for the fan nut, and a couple of pops of the air hammer will loosen the fan clutch. Easily removes and installs fan clutch when repairing water pump or fan clutch. No need for any other special pinning tools..
Made of durable 1/4" thick steel for high strength and durability, with great resistance to corrosion and rust..
Comes with a storage bag for easy carrying..

Check Stock

Acouto Brake Bleed Kit, Brake Bleeder Vacuum Pump Vacuum Tester Brake Bleeding Tool Kit for Car Motorcycle

Multi-function diagnostic tool used to test a variety of essential engine and associated functions.
The kit includes an accurate gauge for testing and servicing many different pressurized systems, also includes reservoir, hoses and adapters for bleeding brake and clutch systems.
The brass body, high abrasion resistance, high strength and corrosion resistance.
Made by high quality copper alloy + iron + rubber material, durable and rugged, Contained in a blow mold case for easy transportation and storage.
Professional bleeding kit helps you get the brake bleeding job done quickly and effectively.

Check Stock

HaroldDol AC Air Compressor With Clutch YCC257，Air conditioning compressor Replacement For 2011-2016 F250 F350 F450 F-550 6.7 6.7 Diesel

【APPLICATION】B A/C Compressor Clutch Remover Installer Puller Tool Kit, is used to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors and fit for GM, fit for Ford, fit for Chrysler, imports, and others.
【EASY TO USE】Keep all threads clean and well-oiled.
Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads.
【HIGH-QUALITY】A/C Compressor Clutch Remover is made of stainless steel with a black coated finish, durable and long lasting.
Resists rust and corrosion under proper care and lubrication.
【PACKAGE INCLUDED】This kit includes puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
【CARRYING CASE】Comes with a carrying plastic carrying case for easy organization, storage, and transport.

Check Stock