Best For Steel Cutting

LIVTE 12 Inch Heavy Duty Bolt Cutter, Hardened T8 Steel Bolt Lock Cutters with Soft Rubber Grip for Rebar Wires, Bolts, Steel Nails, Rivets and Chain Cutting

【High-Carbon Steel Cutting Edge】Forged with high-quality high-carbon steel, the cutting edge treated with high-frequency quenching to achieve a fast and powerful cutting effect. Maximum cutting handle capacity：4mm diameter..
【Alloy Steel Body】Built for tough cutting jobs, this 12 inch bolt cutter feature sturdy, hardened alloy steel jaws that are designed for maximum durability and cutting life..
【Non-Slip Grips】The ergonomic threaded grips fit down over steel handles for improved strength and comfort, not easy to slip down..
【Applications】The design of the lever principle for bolt cutters saves time and effort, ideal for cutting rods, bolts, soft metals, rivets, chains and fencing wire..
【100% Money Back】For this 12 inch heavy duty bolt cutter, if any quality problems, please feel free to come, a replacement or a full refund will be assured..

Check Stock

HandLtoolsmart Victor Type Heavy Duty (300 series) Oxygen/Acetylene Cutting, Welding Torch Tool

High quality heavy duty three piece torch kit.
Constructed with high strength alloy, heavy duty stainless steel and durable brass.
Cutting torch and handle are ready for multiple gas options.
Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
Cuts 1/8-inch to 5-inch and welds up to 1/2-inch steel.
Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tipDescriptionFeatures:.
Special tips: CA2460 cutting attachment, 315FC torch handle.

Check Stock

Heavy Duty Oxygen/Acetylene Cutting Torch Welding Torch (300 series)

-High quality heavy duty cutting torch CA2460 cutting attachment..
-Cutting torch and handle are ready for multiple gas options: Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane..
-Features: Rear-mounted pressure handle switch is easy to operate,Shipping Weight 3.74 pounds..
-Material: This American type cutting torch is constructed with high strength alloy,heavy duty stainless steel and durable brass..
-Cutting torch kit includes a 1-1-101 cutting tips, it can cut up to 3/4 inch steel, but you can buy some different sizes cutting tips, such as 5-1-101, which can cut up to 5 inch steel..

Check Stock

LIVTE 2-Pack 14 Inch Heavy Duty Bolt Cutter, Hardened T8 Steel Bolt Lock Cutters with Soft Rubber Grip for Rebar Wires, Bolts, Steel Nails, Rivets and Chain Cutting,Yellow

【High-Carbon Steel Cutting Edge】Forged with high-quality high-carbon steel, the cutting edge treated with high-frequency quenching to achieve a fast and powerful cutting effect. Maximum opening: 13mm. Maximum cutting handle capacity：5mm diameter..
【Alloy Steel Body】Built for tough cutting jobs, these bolt cutters feature sturdy, hardened alloy steel jaws that are designed for maximum durability and cutting life..
【Non-Slip Grips】The ergonomic threaded grips fit down over steel handles for improved strength and comfort, not easy to slip down..
【Applications】The design of the lever principle for bolt cutters saves time and effort, ideal for cutting rods, bolts, soft metals, rivets, chains and fencing wire..
【100% Money Back】For these 2 pack of heavy duty bolt cutters, if any quality problems, please feel free to come, a replacement or a full refund will be assured..

Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

Westcott Trendsetter Straight Lace Pattern Scissor, 8

STAINLESS STEEL SCISSORS: 8 Inch craft stainless steel scissors are ideal for medium duty use.
Cutting through layers of paper, foam and poster board.
PRECISION CUTTING: Sharp scissors produce precise cuts on a variety of light to mid-weight materials.
STYLISH CUTTING TOOL: The scissors have an assortment of colors and designs.
Featuring lace pattern, metal finishes, unique handles and blade designs.
DURABLE MATERIAL: The craft scissors are made with durable stainless steel blades.
MULTI PURPOSE: These cutting scissors can be used for cutting through layers of paper, foam and poster board.

Check Stock

Cricket S3 Premium Series 550 5.5 inch Shears Professional Stylist Barber Hair Cutting Scissors, Convex Edge, Swedish Steel

HIGH-PERFORMANCE SHEAR – Cricket’s S3 Premium Series Shear is innovative, durable and affordable. This is a high-quality, high-performance hair cutting shear that utilizes innovative steel treatments which positively alter the steel ensuring a longer blade life. Cricket is proud to offer this high quality professional Swedish Steel hair cutting scissor that is priced to fit all budgets..
DURABLE SWEDISH STEEL - Cricket’s S3 Premium Series shear is a hand polished high-performance haircutting shear that is made from high-quality Swedish Steel. The blades are forged to the optimal hardness, ensuring they are not too hard, which could result in cracks, and not too soft where the sharp edge can collapse. These steel treatments ensure a high-quality, durable shear with longer blade life..
CONVEX EDGE BLADES – The convex edge blades on these hair cutting scissors are sharp and provide smooth, effortless cutting. Considered superior compared to other edge grind types, professional stylists and barbers prefer a convex edge blade shear for its longer lasting durability and less drag when cutting..

Check Stock