Best Foot Control Actuators

JSP Manufacturing UFP Plastic Outer Member Cap 2-1/2 inch Diameter 32547 fits A60 A70 A84 A75 (1)

Brand New UFP Plastic Outer Member Cap ~ 1 Pack.
Replaces UFP Part #: 32547 ~ Replacement black plastic outer member housing cap.
Covers the access hole to the actuators master cylinder reservoir plug ~ Twist-Lock design, locks into place with a simple clockwise turn.
Standard issue cap works with UFP Brake Actuators ~ Compatible with Trailer Buddy UFP Brake Actuators.
Fits: A-60, A-70, A-75, A-84 series UFP Brake Acuators ~ Made in USA!.

FEATURES BENNETT BOLT Trim Tab (BOLT129) BENETT BOLT Control with NEW 2020 Integrated Helm Control (OBI9000E) COMPATIBILITY: Boats up to 22 ft long.
TWO (2) Stainless steel trim planes (tabs) and mounting plates (12 x 9 inches) / TWO (2) 20ft. harnesses with waterproof connectors (BAW2020) / BENETT....
TWO (2) 12-volt actuators with 6ft. wire harnesses and waterproof connectors (BEA3000) / Mounting Hardware Included.
The NEW 2020 Integrated Helm Control is Attractive and user-friendly, stand-alone helm control without the need for an external control unit as was in....
The functionality and "brains" of the Integrated Helm control unit are engineered directly into a single, space-saving, and simple-to-install keypad.....

Works with any of the Arduino MKR boards: Zero, WiFi, LoRa, Sigfox, GSM, NBIoT, and Vidor..
Easily connect up to 14 Seeed Studio’s Grove modules to your MKR board..
Ideal for fast projects: plug several modules and go! No soldering required..
Screw terminals to safely connect the carrier board to a power source..
Connect sensors and actuators to the Arduino IoT Cloud and control them remotely!.

DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..

DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..

DUAL-CHANNEL - Connect up to 2x electric actuators with potentiometer feedback to have them travel in parallel, sequence, or individually.
SYNCHRONIZE - Connect devices with potentiometers to synchronize their movements.
SAVE UP TO 3 PRESETS - Use the wired remote to save 3x preset locations.
COMPATIBILITY - With a current rating of 15A, this control system is easy to use with a variety of 12VDC or 24VDC devices. Includes wire harness for each channel.
SPECIAL ATTENTION: Use it only with an actuator with potentiometer feedback. See at our Store PA-14P model..

IP66 water-resistant – the PA-04 linear actuator stands out for its high environmental-protection rating. This IP66 actuator is designed to withstand complete dust ingress and protection against water exposure. Ideal solution for heavy-duty purposes in any industry..
12 volt actuator is equiped with high speed brushed dc motor, stunning operational conditions (-26ºc to +65ºc) / (-14.8°f to 149), also low-noise (db003c45(a))/ Mounting brackets (models BRK-01, BRK-02) are sold separately..
Innovative projects – can be used in several diy projects such as an automated secret bookcase door, adjuastable beds, remote control hidden bar cabinet, mobile barbershop, hidden table tv lift, automated furniture for smart houses and chicken coop doors etc.
We maintain and test all our electric actuators prior to being shIPped to ensure you achieve consistent levels of positioning accuracy, superior quality and outstanding performance..
Superb quality guaranteed or your money back! progressive automations actuators are quiet, clean, non-toxic and energy efficient. Our support team of engineers are ready to help you with your product integration..

SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..