Best Flush Mounted Wall Plates

Flatirons Disc Adhesive Plate Hangers, 2 Inch, 8 Pack

  • EASY TO USE Simply clean the back of the plate, activate glue with water and wait until it becomes tacky, apply to plate back, and let dry overnight..
  • LAYS FLAT The only plate hanger that lays completely flat against the wall with no hooks, or clips. The disc hanger keeps plates flush to the wall..
  • SECURE Once glue fully adheres, your plates will remain securely on the wall. You can have confidence that your china or antique plates will stay in place..
  • REMOVABLE The glue on the disc is 100% water soluble. Whenever you decide to remove the hanger from the plate, soak the plate in warm water and the hanger will come off clean without damaging the bottom of the plate..
  • COMPLETELY HIDDEN These plate hangers give the illusion that the plates are floating on the wall. Make more attractive home decorations with completely invisible hangers..
Check Stock

Ceiling Wall Mount Enclosed Speaker - 250 Watt Stereo In-wall / In-ceiling 8 Enclosed Full Range Mid-Bass Speaker System - 50Hz - 20kHz Frequency Response 4-8 Ohm Flush Mount - Pyle PDPC82 Pair

  • 4-8 OHM IMPEDANCE: The home sound system in-ceiling speakers have dual 1" -inch high-temperature voice coil & 4-8 ohm impedance. Can be used w/....
  • FULL RANGE AUDIO: Regardless the size, these wall/ceiling mounted speakers have 50Hz - 20kHz frequency response & features 8" high power mid-bass....
  • 250 WATT POWER: Pyle Home in-wall / in-ceiling mount surround sound speakers has a power handling of 250 watts peak that will produce high sound....
  • FLUSH MOUNT DESIGN - This ceiling/wall mount speaker has a compact flush mount design for simple easy installation in-wall / in-ceiling or pre-cut....
  • PAINTABLE GRILL: The in-wall speakers / in-ceiling speaker system features a stain-resistant paintable grill cover to match existing flush mounted....
Check Stock

Cable Matters 10-Pack Low Profile 2-Port Keystone Jack Wall Plate in White

  • 2 port wall plate for keystone jacks creates an A/V cable patch location for a home theater media center or office conference room.
  • Single gang keystone wall plate 2 port fits a standard-sized receptacle with the included mounting screws.
  • Add a new patch cable location such as an....
  • Low profile cable wall plate with a cover that is almost flush with the wall.
  • Contemporary glossy design of these face plates provides a professional....
  • Cost effective 10 pack of keystone insert wall plates provides enough outlet plates for a few renovation projects at home or in the office.
  • UL listed keystone jack (E486099) faceplate meets building specifications for low combustion wall outlets with flame-resistant, ABS plastic....
Check Stock

Yes4All Wall Mounted Weight Plate Holder – 2-inch Olympic Weight Plate Storage, Sold in Pairs

  • HEAVY GAUGE STEEL CONSTRUCTION: Made of solid stainless steel, Yes4All Wall Mounted Weight Plate Holders can support up to 550lbs of weight per pair and will last for a long time, ensuring your weight plates are safely stored off the floor.
  • SPACE-SAVING WALL MOUNT DESIGN: Our wall mounted weight plate holder is a cost-effective, space-efficient alternative for the bulky weight plate trees and racks. Comes with all mounting hardware for your comfort.
  • ANGLED LOADING PIN: The loading pin forms a slight incline angle with the wall when mounted, making use of gravity for safer board storage and extra durability. It is at 9” long and 1.9” in diameter, perfect for 2” Olympic weight plates.
  • PROTECTIVE RUBBER PAD: Also included is a rubber padding at the end of the loading pin to protect the stored weight plates from scratches and unnecessary damage as you slide them into the pin.
  • 1-YEAR WARR AND 60-DAY RETURN: We offer a 1-year workmanship warranty and 60-day satisfaction warranty that ensure you have the best experience possible with our product.
Check Stock

Toothbrush Holder Toothpaste Dispenser

  • [ One set is enough ]: The exqusite toothbrush holder set includes 1 wall mounted tooth paste dispendser and 2 toothbrush holders.
  • [ Wall Mounted ]: The toothpaste dispenser is wall mounted that's easy for you to dispense toothpaste, the free standing toothbrush holders save space for your bathtom countertop..
  • [ Stylish Design ]: The Simple design with white color perfect matchs all kinds of your bathroom deco like Morden, BOHO, Farmhome.
  • [ Quick Dry Material ]: The toothbrush stands are made by organice Diatomite that absorb water quickly , it's also good to holds makeup brushs..
  • [ Easy Clean ]: The toothpaste dispenser can be flush with water directly. So that you can clean it when you replace toothpastes..
Check Stock

American Standard 4133A114.020 H2Optimum 1.1 gpf/4.2 Lpf 12-Inch Rough Tank, White

  • Large flush actuator plate opening can be removed for easy access to the inner tank.
  • Adjustable height allowing the bowl to be set anywhere from 15-3/8 inches to 28-1/2 inches from floor.
  • Dual flush actuator offers a choice of 0. 8 or 1. 6 gallons per flush (gpf).
  • Works with K-6299 or K-6918 bowls and K-4177, K-8857, K-75891, K-5413, K-75890, or K-77271 flush actuator plates to create a complete solution.
  • Dual-flush technology allows you to choose between a full or partial-flush.
  • Durable steel frame carrier is installed on 2x4 inches studs behind the wall. See installation guide for more detailed information.
  • When installed per Kohler's installation instructions, the Kohler in-wall tank and carrier system can support up to 880 lbs without damage.
Check Stock

BRTGYM Wall Mounted Weight Plate Holder, Fit 2inch Olympic Weight Plates, Max Weight Capacity 275 lb, Heavy Iron Construction, Mounting Hardware Included (2pcs-Black)

  • 275lbs. Load Limit--- Solid Iron construction with rust-proof black paint finish. Support up to 275lbs per holder, and maximum hold up to 3-4 pieces 45lb weight plates..
  • Fit 2inch Olympic Weight Plates--- 8.7" long sleeve lengths x1.9" OD, perfect for 2" standard weight plates..
  • Nylon Protection Buffer--- Designed with nylon buffer ring to protect weight plates from hitting the metal base when racking them on the mount. And also leaves a large enough gap not to pinch your fingers..
  • Saving Space--- Compared to floor rack storage, wall mounted weight plate holder is much more compact which means it is an excellent way to keep your gym clean and get plates off the floor. No more messy stack of weight plates in the corner, just enjoy your tiny and organized home gym..
  • Easy to Install--- Wall-mounted weight rack includes 2pcs hanging posts, 4pcs wood screws for wood stud, and 4pcs expansion bolts for concrete. NOTE: Please don't install it on drywall, make sure to mount it on the loading wall..
Check Stock

4 Pack Ethernet Wall Plate 1 Port Keystone Jack Blue Cat6 RJ45 Coupler Outlet Connector with Single Gang Low Voltage Mounting Bracket

  • Ethernet CAT6 Wall Plates : The wall plate fits flush to the wall and runs the ethernet/network cable from one side to another end. Ethernet RJ45 keystone jack is compatible with Cat6 Cat5 Cat5e network ethernet cable. Hide the cables in the wall and keep a nice appearance, no wire mess. You can decorate the walls in your home or office to hide cables..
  • High Quality : 1 Port white wall plates are made of ABS flame retardant material. The gold-plated RJ45 pins provide a tight and corrosion-free connection for ethernet cables to maintain signal transmission stability..
  • Wide Applications : The snap-in retaining clip ensures that the ethernet cables can be firmly connected. Rj45 keystone jack coupler are removable, easy for future replace. The female to female cat6 inline couplers and 1-port standard size wall plates provide comprehensive solution for networking, audio, video and more DIY project of your home and office..
  • Package Include : 4.5 x 2.7 inch standard size wall plates, 4 x Rj45 cat6 blue keystone Jack, 4 x 1-port white wall plates, 4 x 1-gang black low voltage mounting bracket. And with mounting screws..
Check Stock

Ceiling Wall Mount Enclosed Speaker - 360 Watt Stereo In-wall / In-ceiling 10' Enclosed Full Range Subwoofer Speaker System - 40Hz-3kHz Frequency Response, 8 Ohm, Flush Mount - Pyle PDIWS10 (White)

  • 8 OHM IMPEDANCE: The home sound system in ceiling speakers has dual 2.0" -inch high temperature voice coil & 8 ohm impedance. Can be used w/ regular home audio receiver & amp. Made to produce both powerful, rich sound & quiet background music.
  • FULL RANGE AUDIO: Regardless the size, these wall / ceiling mounted speakers have 40Hz-3kHz frequency response & is equipped w/ 10" high power subwoofer for full range stereo sound reproduction & will suffice as a home surround system.
  • 360 WATT POWER: Pyle Home in wall / in ceiling mount surround sound speakers has a power handling of 360 watts peak that will produce high sound resonance. It has an 8 Ohm impedance and great for watching movies, listening to music and more.
  • FLUSH MOUNT DESIGN - This ceiling / wall mount speakers has a compact flush mount design for simple easy installation in-wall / in-ceiling or pre-cut speaker openings. For home, office, professional, or custom audio applications on any flat surface.
  • STYLISH WHITE LOOK: The in wall speakers / in ceiling speaker system has a grill cover w/ stylish white finish to match existing flush mounted designs at home or workplace for a clean look & achieve wide-range sound performance without compromise.
Check Stock