Best Flowmeter With Humidifier

LuckyHigh Argon CO2 Mig Tig Flowmeter Gas Welding Weld Regulator Gauge 0-60CFH CGA580 Inlet

Argon flowmeter can be used to reduce and control pressure levels, which is a ideal tool for MIG TIG welding, chemical and electronics industry..
Inlet: CGA580, fit for argon and argon, CO2, and helium tanks..
Outlet: female 9/16" x 18 nut and male 5/8" x 18 fitting. Pressure Range: 0-3500 PSI. 1/4" Hose barb adapter is included.
The flowmeter body is made of full copper material. Fit for most kinds of welders, such as Miller, Lincoln, HTP, etc..
Output flow adjustable from 10 to 60CFH (cubic feet per hour), which is indicated by a ball which moves up and down in the flow tube..

Check Stock

CNYST Ultrasonic Flow Meter Liquid Flowmeter TUF-2000H with 3 Size Transducer for Pipe Diameter DN25 to 6000mm LCD Display Max Liquid Temperature 90 Degrees Celsius

◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring..
◆ High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%.
◆ Non-intrusive measuring: Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.
with 3 size Sensor TS-2/ TM-1/ TL-1 Range: DN25~6000mm.
◆ Large LCD display: Display: 4 line x 16 character LCD with backlight.
Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc..
◆ Principle: transit-time ultrasonic flowmeter.
Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data.

Check Stock

VTSYIQI Handheld Ultrasonic Flow Meter Flowmeters HS-HM for DN15mm to DN300mm Pipe Size for Liquids Temperature Range -30℃ to 90℃ with Clamp On Sensors Transducers LCD Display

with Standard small bracket size: 318*59*85mm.
◆High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%.
◆Principle: transit-time ultrasonic flowmeter.
Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data.
◆Large LCD display: Display: 4 line x 16 character LCD with backlight.
Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc..
◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring..

Check Stock

Argon Regulator Dual Co2 Flowmeter by Manatee for TIG MIG Welder Gas and backpurge 60 SFCH - CGA 580 inlet connection and 5/8 x 18RH outlet fitting - Accurate Gas Metering Delivery System

✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator Dual Flowmeter! Perfect for hooking....
✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG TIG Welding Argon....
✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more....
✔ HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has....
✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings..

Check Stock

G3/4\ Thread Hall Effect Liquid Water Flow Sensor Switch, DN20mm Counter Meter Used for Water Heaters, Water Dispenser, Water Purifier, Coffee Maker 2-45L/Min

Measurement Range: According to strict regulations, the measurement range of the flow switch is 60 (cubic meters/hour), which is large enough to meet daily needs..
Durable: The water flow sensor switch is made of high-quality brass material, which is durable and has a long service life..
Quality Assurance: This flowmeter has undergone strict quality control and testing, and the quality is guaranteed. Safe and reliable..
Practical: High-quality water flow meters can maintain high performance for a long time, and are convenient to use in real life and have strong practicability..
Wide Application: The flowmeter can be widely used in industrial automation, mechanical equipment, air compression industry, refrigeration, heating and ventilation and other fields..

Check Stock

HighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator

▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..

Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..

Check Stock

Furnace Humidifier, Bypass, 17 GPD

BUY WITH CONFIDENCE: This genuine Aprilaire Humidifier Installation Kit was designed and manufactured in the U.S.A. by Aprilaire – the inventor of the Whole Home Evaporative Humidifier, and the leader in indoor air quality solutions, to optimize installation of Aprilaire Whole Home Fan Powered Humidifiers with Manual Control..
COMPLETE INSTALLATION KIT: No need to find the parts yourself! This kit contains all components for installation of an Aprilaire Whole Home Fan Powered Humidifier with Manual Control, model 700M. Reference installation instructions and template included with every Aprilaire Humidifier before installing..
HUMIDIFIER MOUNTING COMPONENTS: (4) Mounting Screws attach Humidifier to furnace air supply or return duct.
HUMIDIFIER PLUMBING COMPONENTS: ¼" outside diameter (OD) Water Supply Tube (25 ft.) connects Humidifier to a water source, ½" interior diameter (ID) Drain Tube (15 ft.) connects Humidifier to floor drain, and ⅝" Hose Clamp fastens Drain Tube to drain connection.
HUMIDIFIER ELECTRICAL COMPONENTS: Aprilaire Current Sensing Relay Model 50, 18/2 Thermostat Wire (10 ft.) connects Manual Control to Humidifier, and (4) Twist-On Wire Nut Connectors.

Check Stock

Honeywell - HE250A1005 - Furnace Humidifier, Bypass, 17 GPD

BUY WITH CONFIDENCE: This genuine Aprilaire Humidifier Installation Kit was designed and manufactured in the U.S.A. by Aprilaire – the inventor of the Whole Home Evaporative Humidifier, and the leader in indoor air quality solutions, to optimize installation of Aprilaire Whole Home Humidifiers with Automatic Control..
COMPLETE INSTALLATION KIT: No need to find the parts yourself! This kit contains all components for installation of an Aprilaire Whole Home Humidifier with Automatic Control, models 400, 500, 600. Reference installation instructions and template included with every Aprilaire Humidifier before installing..
HUMIDIFIER MOUNTING & BYPASS DUCTING COMPONENTS: (4) Mounting Screws attach Humidifier to furnace air supply or return duct, 6” Duct Collar connects Bypass Flex Duct to furnace air supply or return duct, and 6” Bypass Flex Duct (3 ft.) connects Humidifier to 6” Duct Collar.
HUMIDIFIER PLUMBING COMPONENTS: ¼" outside diameter (OD) Water Supply Tube (25 ft.) connects Humidifier to a water source, ½" interior diameter (ID) Drain Tube (15 ft.) connects Humidifier to floor drain, and ⅝" Hose Clamp fastens the Drain Tube to drain connection.
HUMIDIFIER ELECTRICAL COMPONETS: 18/2 Thermostat Wire (25 ft.) connects Automatic Humidifier ....

Check Stock