Best Flow Unloader Valve

CAT Pumps Pressure Washer Pump - 2.7 GPM 3000 PSI - 4DNX

Concentric, high-density, polished, solid ceramic plungers provide a true wear surface that greatly extends seal life.
Integral Unloader Valve with built-in by-pass is standard, providing a safety measure while controlling pressure..
Fixed chemical injector mounts directly to unloader valve to provide cleaning flexibility.

Brand new Air Compressor Control Valve (95-125 PSI Pressure Switch)..
It is comparable to a Furnas, Square D, and many more.
The product has an On/Off switch and a unloader. It will be working on both 2 stage and single stage.
PRESET 95-125 PSI ¼" COMPRESSION UNLOADER VALVE ¼" FEMALE NPT TANK CONNECTION w/ 3 EXTRA 1/4" PORT.
MAX AMPS, 20 AMPS AT 120VOLT / 12 AMP AT 240 VOLT , AND 9.6 AMP AT 3PH 240 VOLT.

✅ [Size]--6.3 mm unloader valve connection, 1/4 inch NPT Female connection. Cut off pressure 95-125 PSI.With relief valve can avoid the overload operation of the air compressor..
✅ [Part number]--LF10-4H-1-NPT1/4-95-125.This pressure switch is designed for a single stage or two stage air compressor pumping up to 125 PSI..
✅ [More conveient to use]--The four-port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports..
✅ [Intelligent handle design]--The handle can be used to cut off air compressor and 4-port base simply the mountion of exhaust valve and pressure gauge.This switch features a built-in On / Off metal lever and also a unloader located on the side of the switch..
✅ [More safer to use]-- This switch comes preset to turn the compressor on at 95 psi and shut off at 125 psi..

Replacement Part NO.:AR42118/200348GS/315747GS/202328GS/772235.
Fit For Annovi Reverberi Pumps Models:RMW2G20 / RMW2G23 / RMW2G24 / RMW2G25 / RMW2. 2G20 / RMW2. 5G26D-F7 / RMW22G24 / RMW25G25 / RMW25G28 / RMV2G20 /....
The unloader valve kit is made out of metal and helps to control the water pressure..
This kit is also fit for other pressure washer such as Troy-Bilt,B&S,Hus..

Unloader Valve Kit Fits Many Coleman Powermate & Simpson Models Pressure Washer Pumps.
310924003 Pump Unloader Valve Kit for many troy bilt Models.
Please check the dimensions of this product before order,any problem, please contact us, we will do our best to serve you within 24 hours!.

Replacement 3600 PSI Pressure Washer Pump, 2.5 GPM for Dewalt DH3028, DXPW3025, DXPW3425.
Specs – Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM, 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 3/4″ Horizontal Shaft. Refer to images 2 and 3 for more information.
Pump comes with built in Unloader, Chemical Injector, Thermal Release Valve, & Oil Reader included.
Replaces most pumps with 3/4″ shaft. Mounting pattern is 2 9/16″ center to center.

Fits following Pressure Washer Pump Model:RMV, RMW and SRMW pumps. RMW2G20 / RMW2G23 / RMW2G24 / RMW2G25 / RMW2.2G20 / RMW2.5G26D-F7 / RMW22G24 / RMW25G25 / RMW25G28 / RMV2G20 / RMV2G24 / RMV2G25 / RMV25G30 / SRMV22G26 / SRMW22G26 / SRMW24G28/ Troy Bilt 200348GS.
Package included: Unloader Valve Kit (show as pictures only).
Easy to install, But it’s better to be installed by professionals,(no instructions included).
High quality Pressure Washer Pump Unloader Valve.
Please do not hesitate to contact us with any questions.

... & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".

The ROP Shop replacement 7/8″ Shaft, Aluminum Head, Vertical Pump for Pressure Washer with 2800 PSI and 2.3 GPM.
Specs – Maximum Pressure: 2800 PSI, Maximum Flow: 2.3 GPM, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 7/8″ Vertical Shaft. Refer to images 2 & 3 for more information.
Includes – (1) Pump, (1) Keyway & (1) Thermal Release Valve.
Pump comes with built in Unloader & Chemical Injector.
When installing, please ensure that the keyway is installed before running your pressure washer.