Best Flourescent Lamp T8

Four-Bros Lighting LED High Bay Light 6 Lamp 5000K Daylight White, 5 Year Warranty, Industrial Grade, Warehouse, Shop, Garage Lighting - UL Listed, DLC Approved, Made in USA, BAA Certified, Pack of 6

#1 Rated Made in USA LED High Bay. BAA Certified Fixture.
✔ Single-sided 18-watt LED T8 tubes included with every LED High Bay purchase✔ MAINTENANCE-FREE - No ballast-drama anymore. This 6 Lamp LED high bay light fixtures operates (6) LED T8 tube lights that bypass the ballast. Simply install the LED tube in its marked location and twist. Our LED high bays must be wired to operate 6 LED T8 Tubes.
✔ MAINTENANCE-FREE - No ballast-drama anymore. This 6 Lamp LED high bay light fixtures operates (6) LED T8 tube lights that bypass the ballast. Simply install the LED tube in its marked location and twist. Our LED high bays are rewired to operate 6 LED T8 Tubes17,160 Lumens (Brighter than Fluorescent T5HO) 5000K Daylight White Color Temp.
✔ HOW DOES IT WORK - Each high bay Fixture comes with all the wiring and tombstones needed to be installed on the field. THESE DO NOT COME PREWIRED..
✔ 5 YEAR WARRANTY - Buy with confidence, risk-free. Four Bros Lighting five-year warranty got you covered! Contact us for an easy and fast replacement..

Check Stock

JESLED Non Shunted LED Tombstones - (Pack of 50) T8 Lamp Holder, UL Turn Type Tombstone Lampholder for T10 T12 LED Fluorescent Tube Replacement, Medium Bi-pin G13 Socket for Programmed Start Ballasts

【Electronic Parameter】: 660W max wattage and 600V the maximum voltage, this Bi-pin T8 tombstone fit for all kind of T8 T10 T12 fluorescent tubes..
【UL Standard】: These T8 lamp holders are UL listed. They are made of high quality PBT material which is very durable and fireproof, and makes it the ideal for replacing old florescent lamp holders, 100% safe from fire hazzard, heat resistant..
【Easy to Install】: These T8 lampholder are very easy to be used for both dual end powered and single end power fluorescent tubes, connect with 18 gauge power wires, it is very easy to install a light in this socket..
【Ideal for 4FT LED Bulbs 】: This non shunted led tombstone is widely used for T8 4ft led bulbs. If you need high output 4ft led bulbs, please search "B07F73PSRY", "B074QP6PNH", "B07CWXT5R1" or "B07LFJ27JH"..
【Hassle-free Warranty】 - JESLED offers 3-year unlimited warranty means we've got you covered! Contact us for an easy and fast replacements..

Check Stock

12-Pack JACKYLED Non-Shunted Turn-Type T8 Lamp Holder UL Socket Tombstone with 10 inches Wires Attached for LED Fluorescent Tube Replacements

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
Max Voltage: 601V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 101% safe from fire hazard, durable even after years of use..
Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires, plug the tube in and twist, a plug-and-play solution for your lighting projects..
Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T9 lights..
100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..

Check Stock

Goodlite G-20232 F32T8/850/ECO Straight 32 Watt 48-Inch Inch 800 Series T8 Fluorescent Tube Light Bulb 30 Pack Super White

G13 Medium Bipin, 48" long, Good Efficiency 75% less energy than incandescent,.
3500 Lumens More than 100++ lumens/watt (efficacy) Bulb Meets Federal Minimum efficiency Standards.
Brand Cross Reference F32T8/830/ECO - F32T8/SPx30/ECO - F32T8/TL850/ALTO - FO32/850/ECO -F32T8/XL/SPX50/ECO - F32T8/TL850 PLUS/ALTO -FO32/850/XP/ECO.
CRI 85 800 series high quality triphosphor coding Energy efficient, an environmentally responsible lamp low mercury meets TCLP requirements.
Works with INSTANT / RAPID Start Fixtures, Long Life: 25,000 hour ,Bulbs sleeved safe wile shipping.

Check Stock

20-Pack JACKYLED Screw Type T8 Lamp Holder with Wires UL Non-shunted Tombstone Light Socket for LED Fluorescent Tube Replacements

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
Max Voltage: 608V. Great for retrofitting your fluorescent....
UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 108% safe from fire hazard, durable even after years of....
Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 25 AWG Wire. Just connect the wires, plug the....
Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between....
108% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience.....

Check Stock

CNSUNWAY LIGHTING 8FT LED Bulbs, 45W 5400LM Super Bright, 5000K Daylight Glow, Frosted Cover, Ballast Bypass, High Output, T8 T10 T12 Single Pin LED Fluorescent Replacement Bulb(4 Pack)

【Connectable】-8FT LED shop lamps can be connected with seamless connectors or T8 connector wires. (Please do not exceed 4 in series at a time) Replace the 150W fluorescent lamp..
【EASY INSTALLATION】 - Easy to replace the traditional fluorescent tube lamp fixture, hard-wired, plug in with T8 power cord. Package comes with T8 metal clips brackets, screws, small connector, a on/off switch power cord and pigtail power cable. You can install these led tube lights on the wall or ceiling..
【EYE PROTECTIVE】 T8 LED Tube Lights with bracket(Integrated) - Daylight white glow 5000 Kevin with clear cover and provide high output. These 8FT lights can be used Indoor shop, grocery, flea market, garage, warehouse, workbench, basement, laundry room, photo studio, gymnasium, practice room...
【HIGH OUTPUT】 - This LED light fixture has 384 LED chips, high output and it will emit up to 9360 lumens bright lighting..
【QUALITY ASSURANCE】 - This 8FT LED Tube Light Single Fixture have 3 years warranty, easy and fast replacement is offered if any quality issue..

Check Stock

NYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!

Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
2-year, warranty does not require registration.
however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.

Check Stock

EFAYCRR (6 Pairs) Tombstone Base Holder Socket Connector with T8 T10 T12 Single Pin FA8 8ft LED Bulb Light Replacement Fluorescent Plunger Lampholder

【UL Standard】Single Pin T8 lamp holders are UL listed.Made of Flameresistant material..
【Widely used 】FA8 tombstones fit for all kind of T8 T10 T12 single pin fluorescent and LED tube lamp, advertising light box and more.Perfect for lighting up your home or office, basement, closet, studio, etc. Hold the lamp tightly..
【Electronic Parameter】Max Current 6A, Max wattage 660w,Voltage: 100-600V..
【Easy to install】Snap-in or Slide-on Installation, Can Directly Connect with The FA8 Single Pin Light Tube..
【Package included】6 Pairs Single Pin FA8 Sockets for 10 tubes (without cable).

Check Stock

3.4.7

Standard Instant Start T8 Ballast will accept up to 4 or 3 F32T8 lamps.
Slim profile with mini can housing for portability.
Instant start electronic ballast for long lamp starting cycles and low initial cost.
Anti-striation circuitry helps to eliminate and prevent the spiraling effect from lights.
Mounting dimensions: 8.9-Inch L x 1.1-Inch W, Mounting slot set 0.3-Inch apart.

Check Stock