Best Flatbed Bumper Winches

MLHpeak Winch Roller Fairlead 10 inch Winch Roller Fairlead 4 Way 10” Universal Mount Cable Guide Heavy Duty Nut Disassembly SUV Truck F150 8000 10000 12000lbs 14000 16000

【4-WAYS ROLLER DESIGN】Winch roller guide with 4 rollers that run horizontally and vertically,this winch roller fairlead guide your wire rope onto the winch drum, protect it by reducing friction and wear, especially during high angle pulls..
【CONSTRUCTION】Made from high-strength steel and black powder coat finish,AUXMART roller cable guide provide heavy-duty performance and increase the service life of the product..
【FOR 8000-17500 IBS WINCHES】AUXMART universal roller guide can be used in conjunction with 8,000lbs-17,500lbs winch, the roller is very convenient to rotate, ideal for off-road adventures..
【EASY TO INSTALL】This winch guide roller is fitted with industry-standard mounting holes 10" on-center, for a precise fit on your bumper. No modifications are needed..
【UNIVERSAL APPLICATIOIN】AUXMART roller fairlead fits Warn, Ramsey, Mile Marker or other winches. It mounts to any standard winch plate or winch-ready bumper with ease..

Sidewinder that replaces winch’s hook and shackle to provide faster, easier, more direct link to recovery point and rigging accessories.
Quickly attaches to most bumper recovery points, D-ring shackles, recovery straps, rope extensions, and soft shackles.
Directly attaches to bumper D-ring mount tabs with at least 1-3/8" clearance from face to center hole.
Body is made from ultra-durable forged 6061-T6 billet aluminum and is corrosion, impact, salt, weather, and UV-resistant.
Compatible for winches up to 18,000 lbs. with a minimum 64,000 lb. ultimate breaking strength.

Sidewinder that replaces winch’s hook and shackle to provide faster, easier, more direct link to recovery point and rigging accessories.
Quickly attaches to most bumper recovery points, D-ring shackles, recovery straps, rope extensions, and soft shackles.
Directly attaches to bumper D-ring mount tabs with at least 1-3/8" clearance from face to center hole.
Body is made from ultra-durable forged 6061-T6 billet aluminum and is corrosion, impact, salt, weather, and UV-resistant.
Compatible for winches up to 18,000 lbs. with a minimum 64,000 lb. ultimate breaking strength.

[Fit for]:2013 2014 2015 2016 2017 2018 for Dodge Ram 1500.
[Winch Plate & D-Ring Shackles]:Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. Two 4.75 ton D-ring shackles and black isolators included..
[Package Included]:1XFront Bumper,1XRear Bumper,Mounting Hardware as Shown.
[Never Rusts]:Front and Rear Bumper have a high quality,Powder coated Black Finish and along with our advanced laser welding technology, prevents rust from occurring..
[Bolt-On Installation]:The OCPTY bumper is engineered to be a direct bolt-on installation for your . As a direct fit replacement, this bumper requires no additional cutting, welding, or fabrication for installation..

【 Fits】2020+ Polaris RZR PRO XP / RZR PRO XP 4 | Please Note: Not compatible with Polaris front high coverage bumper, part # 2883749 / not compatible with winches using a 76mm x 124mm (3" x 4 7/8") mounting bolt pattern..
【Complete, Bolt-On Ready Winch Kit】Ready to make sure you are not stranded on the trail? This kit is exactly what you need. It includes our Black Ops 6000 lb winch and a winch mounting kit specifically made to fit perfectly on your Polaris RZR. A strong mount is just as important as a strong winch—don’t get caught with a mount that can’t take the weight of your machine..
【6000 lb SuperATV Winch】100% waterproof Polaris RZR winch | Powerful permanent magnet 12V 1.9 Hp Dc Motor | 6000 lb. rated line pull synthetic 50' rope | 266:1 Gear ratio | Winch dimensions (Lxwxh) = 14.56” X 4.41” X 4.86” | Mounting holes: 76mm x 169mm (3" x 6 5/8") | Fairlead bolt pattern: 152mm (5.98").
【Machine Specific Mounting Plate】Mount made specifically to fit your PRO XP | Made with 3/16” steel plating | UV-r....

Heavy-duty cargo tie down strap designed to be a replacement strap for the ProGrip Heavy Duty Ratchet Cargo Tie Down (not included).
strap also usable with other strap ratchet systems or truck winches.
Durable strap used in heavy-duty ratchet application can be used for moving cargo on flatbed trucks, trailers, or hauling vehicles.
Features yellow polyester webbing that resists bio-burden, UV rays, shrinkage and prevents stretching when wet allowing safe transport in various weather conditions.
Job-site rated for extra safety, strap includes a zinc coated double J-hook on end of strap that provides corrosion resistance and a durable hook that won't bend.
Longer than the standard 27' length, polyester strap measures 30' length and 2".
10,000 pounds break strength with 3,333 pounds working load limit.

FITMENT - Fit for 1999-2004 Grand Cherokee WJ..
WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000lbs. winches. High strength D-ring mounts are welded on both inside and outside. Two 4.75 ton D-ring shackles and black isolator included..
LED LIGHTS - Two 12W LED Lights, integrated LED models and wiring harness included..
CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet. Textured black powder coat finish..
EASY INSTALLATION - EAG modular front bumper is engineered to be a direct bolt-on upgrade replacement for your vehicle original stock bumper reusing the factory mounting points..

LED LIGHT AND LIGHT SURROUNDS - Two 12W LED lights included.EAG patent metallic gray ABS light surrounds included. Direct bolt-on design for secure rattle free installation..
WINCH PLATE & D-RING SHACKLES - Built-in winch plate for up to 12,000 lbs. winches. High strength D-ring mounts are welded on. NOTE: D-ring shackles are NOT included..
CONSTRUCTION - Use of laser-cutting, CNC folding and robotic assembly welder. Manufactured from durable 5/32" steel sheet and 2" x .120 wall steel tubing. Textured black powder coat finish..
EASY INSTALLATION - EAG front bumper is engineered to be a direct bolt-on upgrade replacement for your wrangler original stock bumper reusing the factory mounting points. No cutting or modifications required..

works in conjunction with go rhino bumper shells only ( br 10 series).
"precision laser cut and cnc formed from 3/16" thick steel".
rated for use with winches up to 16,500 pounds.
additional side support brackets guard against vibration and front and side impacts.