Best Flatbed Axle Shafts

VULCAN Economy Car Tie Down Kit with 4 Lasso Straps 4 Flat Hook Ratchets and 4 Free 36 Inch Axle Straps - 3,300 Pound Safe Working Load

  • PROFESSIONAL GRADE TIE DOWNS - Professional truck, trailer, auto hauler, and flatbed operators choose VULCAN auto tie down systems to haul millions of....
  • FREE 4 PACK OF 36 INCH AXLE STRAPS - Axle straps are designed to tie down a vehicle by the axle or through the vehicle's rims. The 2 inch x 36 inch....
  • INDUSTRIAL STRENGTH LASSO STRAPS - These heavy duty, car tiedown units include smooth O-rings and a cordura wear pads. The certified polyester 2 inch....
  • SPECIFICALLY DESIGNED TO PROTECT VALUABLE RIMS - The soft webbing and smooth rings are very gentle on delicate rims and expensive finishes. Cordura....
  • SAFE AND COMPLIANT - Safe working load of 3,300 pounds is stamped on the warning tag of each strap for easy inspection, and all VULCAN straps meet or....
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Wheel Kit, 6" Black Blow-Molded Hollow Plastic Wheels & Axle Caps for 3/8" Axle Shaft - Includes 2 Wheels & 2 Axle Caps (696561)

  • For battery chargers with 3/8" axle shaft. Also used on barbecue grills and other light equipment, check dimensions for proper fit. Replaces the following battery charger wheel sets: Associated 605672, Century 413-044-666, John Deere PT1598, PT16173, PT19357..
  • PLEASE NOTE THAT THESE WHEELS ARE FOR LIGHT-DUTY APPLICATIONS. DO NOT INSTALL THESE WHEELS ON 2-WHEEL EQUIPMENT THAT WEIGHS OVER 50 LBS. USE ONLY SMOOTH AXLE SHAFTS - DO NOT USE THREADED ROD. DO NOT USE SPACERS, SPRINGS OR SHIMS ON UNDERSIZE AXLES..
  • Kit includes 2 wheels, 6" black hollow plastic, and two 3/8" press-on axle caps. Steel axle caps are press-fit, no special tools required..
  • Load Rating: 25 lbs per wheel (50 lbs per pair).
Check Stock

Trekassy 2\ x 120\ Car Tie Down Straps for Trailers with Snap Hooks, 4 Pack Heavy Duty Tire Straps with 4 Ratchet, 4 Axle Straps

  • 【Free 4 pack 36”axle straps】 Versatile flatbed tire straps for a car trailer are used to go through the rims of the transported vehicle, also can be secured to any solid part of the wheel, axle or frame..
  • 【Durable & Heavy Duty】 These wheel tie down straps are 2" wide coverage for less friction and made of industrial grade polyester material coating UV and wear resistance.Lab test with safe working load of 3333 lbs and break strength of 10,000 lbs..
  • 【Won't Scratch or Damage Wheels】 The wheel straps for hauling cars are made of non-abrasive material and come with cordura wear pads so that prolong the service life and protect rims from damage tension..
  • 【Fit All Size Tires】 Adjustable 6 loops strap, 10ft lasso strap with smooth D-ring is perfect for all size tires, easy and safe to fasten cars, trucks, jeeps and more. A good fit for long hauls..
  • 【Package】 Complete tire tie down straps kit( 4 solid ratchets with snap hooks, 4 adjustable loop straps, 4 pack 10ft tire straps,4 pack 36" soft axle straps, 1 carry bag), 1 user manual..
Check Stock

VULCAN Axle Tie Down Combo Strap with Snap Hook Ratchet - 2 Inch x 114 Inch - 4 Pack - PROSeries - 3,300 Pound Safe Working Load

  • PROFESSIONAL GRADE TIE DOWNS - Professional truck, trailer flatbed, and auto hauler operators choose Vulcan automobile tiedown systems to haul millions of cars every year, and Vulcan is recognized as the most qualified, most experienced, car tie down manufacturer in the world..
  • UNIQUE PROSERIES WEBBING - Thick, yet flexible 1-ply 2 inch Vulcan PROSeries webbing is 67% more abrasion-resistant, 30% more cut-resistant for maximum durability and extra-long service life..
  • EASY TO USE - The easiest way to secure vehicles for transport by the axel, this unit eliminates fumbling around under the vehicle because the snap hook end loops around the axle and clips back to the D ring. The ratchet end attaches to your de....
Check Stock

NICHE Front Rear CV Drive Shaft Axle Set Kit for 2007-2012 Polaris Sportsman 500 800 1332881 1332935

  • Front Axle Replaces OEM Part Numbers: Polaris 1332881, 1332656, 1332501, 1332471.
  • Rear Axle Replaces OEM Part Numbers: Polaris 1332935, 1332654, 1332511, 1332421.
  • Compatible with: 2007-2012 Polaris Sportsman 500, 2007-2012 Polaris Sportsman 800.
  • Ultra Rugged 4340 Chrome-Moly Shafts and Joints, Puncture and UV Resistant Neoprene Boots, Low-Profile Boot Clamps, Resistant to Catching Debris.
  • Heat-Treated Bearings an Joints, Packed with High-Performance Moly Grease, Fully Assembled Including Inner & Outer Joints on the Shaft.
Check Stock

VULCAN Ultimate Axle Tie Down Kit - PROSeries - Includes (2) 22 Inch Axle Straps, (2) 36 Inch Axle Straps, (2) 96 Inch Snap Hook Ratchet Straps, and (2) 112 Inch Axle Tie Down Combination Straps

  • PROFESSIONAL GRADE TIE DOWNS - Professional truck, auto hauler, flatbed, and trailer operators choose Vulcan auto tie down systems to haul millions of cars every year. Vulcan is recognized as the most qualified car tie down manufacturer in the world. This complete kit of axle straps and tie back straps avoids scratching delicate rims or damaging the underbody of the vehicle. These straps are backed by 50 years of manufacturing expertise that only Vulcan can provide..
  • UNIQUE PROSERIES WEBBING - Extra thick 2" wide Optic Orange VULCAN PROSeries webbing is extremely durable and has hard plastic edges to resist side cuts. VULCAN PROSeries webbing is 67% more abrasion-resistant and 30% more cut-resistant than standard webbing. Each strap includes a cordura wear pad for even more abrasion resistance, for longer strap life and protects the vehicle from inadvertent scratches. Ratchet buckles and end fittings are fully plated to resist the elements..
  • EASY TO USE - The heavy duty D rings easily accept snap hooks, grab hooks, t-hooks or j-hooks, and you can even feed a chain through them. Just loop the strap around any axle or through a rim and bring the D rings back together. Use the snap hook ratchet straps to apply tension to the axel straps or use the axle ti....
Check Stock

VULCAN Ultimate Axle Tie Down Kit - Silver Series - Includes (2) 22 Inch Axle Straps, (2) 36 Inch Axle Straps, (2) 96 Inch Snap Hook Ratchet Straps, and (2) 112 Inch Axle Tie Down Combination Straps

  • PROFESSIONAL GRADE TIE DOWNS - Professional truck, auto hauler, flatbed, and trailer operators choose Vulcan auto tie down systems to haul millions of cars every year. Vulcan is recognized as the most qualified car tie down manufacturer in the world. This complete kit of axle straps and tie back straps avoids scratching delicate rims or damaging the underbody of the vehicle. These straps are backed by 50 years of manufacturing expertise that only Vulcan can provide..
  • UNIQUE SILVER SERIES WEBBING - Flexible 1-ply 2'' wide Vulcan Silver Series tie down webbing is thick and strong for excellent durability and long service life. Each strap includes a full body cordura wear pad for even more abrasion resistance, which provides longer strap life and protects the vehicle from inadvertent scratches. Industrial grade ratchet buckles and end fittings are fully plated to resist the elements and provide dependable service in the field..
  • EASY TO USE - The heavy duty D rings easily accept snap hooks, grab hooks, t-hooks or j-hooks, and you can even feed a chain through them. Just loop the strap around any axle or through a rim and bring the D rings back together. Use the snap hook ratchet straps to apply tension to the axel straps or use the axle tiedown combination....
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock