Best Flat Bed Printer

Sovol SV01 Upgraded 3D Printer 95% Pre-Assembled with Direct Drive Extruder Meanwell Power Supply Glass Plate & Built-in Thermal Runaway Protection 280x240x300mm

  • ★ Direct Drive Extruder ★: Sovol SV01 features with direct drive extruder and dual Z lead screw, greatly increase its printing stability and....
  • ★ Meanwell Power Supply ★: Built-in branded Meanwell power supply ensures stable and sufficient power, heat up the hotbed and nozzle fast.....
  • ★ Removable Glass Plate ★: This 3D printer comes with a flat glass plate on the regular heated bed, greatly resolving warped bed issues. No matter....
  • ★ Semi-Assembled Kits ★: Sovol Direct Drive Extruder 3D Printer comes with several partially assembled kits, just only take you at most 30 minutes....
  • ★ Sovol Support ★: All of our products are shipped to the consumer directly from the manufacturer, we provide lifetime technical assistance.....
Check Stock

Sovol SV03 3D Printer Upgraded Larger Printing Size FDM Printer with Direct Drive Extruder & BLTouch & Marlin TMC2208 Silent Board & Glass Bed 350 x 350 x 400 mm

  • EXTRA LARGE - This printer comes with one of the largest build spaces available. 350x350x400mm (13.8” x 13.8” x 15.8") build volume makes SV03 the....
  • DIRECT DRIVE - Upgraded direct drive extruder leads to faster retraction with more accurate extrusion, allowing you to not only print with more....
  • SILENT BOARD & BLTOUCH PREINSTALLED - TMC2208 board has a resolution upwards of 256 individually smaller, high-res steps and thus less noise is....
  • CARBON CRYSTAL SILICON GLASS BED - This printer comes with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces....
  • MEANWELL POWER SUPPLY - Built-in 350W Meanwell power supply ensures stable and sufficient power, fast heatup for the hotbed and nozzle. It protects....
Check Stock

8 Pieces 3D Printer Heat Bed Leveling Parts Silicone Solid Column OD 0.63 Inch ID 0.16 Inch Stable Hot Bed Tool Heat-Resistant Buffer Compatible with CR-10 Ender 3 Bottom Connect Black

  • Material: 3D printer heat bed parts are made of heat-resistant silicone, solid bed mounts is very stable, not shaking, heat-resistant and....
  • Function: larger contact surface than spring, reduce shock, heatbed silicone leveling column better to level your 3D printer.
  • Size: the outer diameter 16 mm/ 0.63 inch, inner diameter 4 mm/ 0.16 inch, height is 18 mm/ 0.71 inch.
  • This heat-resistant and pressure-resistant....
  • Application: replace original spring leveling for 3D printer hot bed platform.
  • Simple installation, no need complicated tools, convenient for using.
  • Package includes: there are 8 pieces heat bed silicone leveling column, enough to meet your need, suitable for 3D printer hot bed and platform bottom....
Check Stock

12 Pcs 3D Printer Heatbed Parts Silicone Leveling Solid Bed Mount Heat Resistant 3D Printer Parts Heat Buffer Silicone Heat Bed Parts Compatible with CR-10 Ender 3 Bottom Connect (Brown, 0.7 Inches)

  • Ample Amount: the package contains 12 pieces of 3D printer heatbed parts in brown, which are designed to replace your springs under the heated bed, sufficient quantity can meet your daily use and replacement needs.
  • Silicone Material: the 3D printer bed mounts are made of quality silicone material, stable and flexible, with nice heat resistant feature, can nicely reduce the vibrations when working, providing good leveling performance for your 3D printer.
  • Compatibility: the silicone bed leveling mounts are compatible with CR-10 and Ender 3 series 3D printers, they will install effectively and stably on your 3D printer, will not easily move.
  • Suitable Size: the heated bed mount measures approx. 4 mm/ 0.16 inches in inner diameter, 18 mm/ 0.7 inches in height, which is easy to level your 3D printer and remain your set levels.
  • Simple to Store: with compact size and lightweight, the 3d printer parts are easy for you to store in your tool box, occupying a little space, also very convenient to take out when needed.
Check Stock

3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender 3 V2/ Ender-3 /Ender 3 Pro

  • Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3/Ender 3 Pro / Ender 3X.
  • Original 3D Printer Ender 3 Replacement Parts / 3D Printer Accessories for Ender 3 / Ender 3 Pro / Ender 3X.
  • Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform..
  • 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support..
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

FYSETC 3D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling - 10 Pack

  • Please Note: The length of it is 20mm which is not suitable for CR10 series products).
  • Die Spring: compatible with most 3D Printer Bed, great Ender 3/2 TronXY X5S/ Geetech A10m heat bed springs, flat top and stiffer.
  • (Note: The length of it is 20mm which is not suitable for CR10 series products).
  • Rectangular Section, strong, keeps print bed level better..
  • They couldn't be easier to install! Unscrew the adjustment knobs from the bottom of your print bed and replace those springs with these new ones. Screw the adjustment knobs back into the print bed with these new springs and you're done! Level your bed and keep on printing!.
Check Stock

Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape, Easy Clean Removal up to 21 Days, Masking Tape

  • Wide Blue Painters Tape - Tapix 3d printer tape is easy to use and remove as well because of its width. The width allows you to put one stripe of tape to cover your print bed instead of cutting and pasting various 1-inch stripes of adhesion tape. For almost all types of the commonly used print bed, only one stripe of Tapix blue tape will be enough to cover your entire printer bed..
  • 3D Printing – Blue painters tape is the preferred use for 3D printing projects. It is simple, cheap and effective. Using our wide painters tape will make it easy to cover your whole 3D printer bed. By applying blue tape to the print bed, you will be able to remove the 3D print from the bed with ease when done printing..
  • Adhesive - Blue painters tape sticks well to common 3D printing beds. Stripes of tape can be applied to the build platform surface and easily removed or replaced when ready to do a new project. It adheres well to the print bed and leaves no residues behind..
  • Premium Quality Blue Tape - Blue painters tape is strong, flexible, durable, and versatile. Our 3d printer tape is heat resistant so it can withstand up to 190°F/87°C heated beds and the heat of the filament..
  • Painting - Wide Blue Painters Masking Tape is a medium adhesive tape that leaves no damage and....
Check Stock

Wide Blue Painters Tape, 6 inch x 60 Yards, 3D Printing Tape, Easy Clean Removal up to 21 Days, Masking Tape

  • Wide Blue Painters Tape - Tapix 3d printer tape is easy to use and remove as well because of its width. The width allows you to put one stripe of tape to cover your print bed instead of cutting and pasting various 1-inch stripes of adhesion tape. For almost all types of the commonly used print bed, only one stripe of Tapix blue tape will be enough to cover your entire printer bed..
  • 3D Printing – Blue painters tape is the preferred use for 3D printing projects. It is simple, cheap and effective. Using our wide painters tape will make it easy to cover your whole 3D printer bed. By applying blue tape to the print bed, you will be able to remove the 3D print from the bed with ease when done printing..
  • Adhesive - Blue painters tape sticks well to common 3D printing beds. Stripes of tape can be applied to the build platform surface and easily removed or replaced when ready to do a new project. It adheres well to the print bed and leaves no residues behind..
  • Premium Quality Blue Tape - Blue painters tape is strong, flexible, durable, and versatile. Our 3d printer tape is heat resistant so it can withstand up to 190°F/87°C heated beds and the heat of the filament. Available in several widths 4”, 6”, 9”, and 12”..
  • Painting - Wide Blue Painters Masking....
Check Stock