Best Fittings Tees

Garden Automatic Drip Irrigation Set,30m Adjustable Micro DIY Irrigation Kit Plant Water Saving System,Heavy Duty Tube Watering Kit for Patio Lawn Garden Greenhouse Flower Bed

  • 149PCS DRIP IRRIGATION SYSTEM KIT - Includes 98FT 1/4" tubing and 148 fittings for watering plants at one time. The drip irrigation kit is enough to cover small gardens up to 120 square feet. * Insert the tube over the second barb on fittings can prevent popping off..
  • GARDEN WATERING SYSTEM - Contains a Y connector and it is easy to divide the water mainline into 2 independent tributaries. * Note: Some customers feedback that Y connector (standard 3/4" tap) cannot adapt to the standard garden water tap, get a quick-connect Faucet Connector for it..
  • ADJUSTABLE DRIP IRRIGATION KIT - Watering irrigation system kit comes with 30 x 1/4" barbed nozzle tees for 30 sprayers and 20 x 1/4" nozzle tees for 20 misters. All of the sprayers and misters are adjustable to meet different water flow needs. Customized watering for your plants in pots..
  • EASY INSTALLATION - Simple instruction included, you can install the kit as the instruction, or just use the needed fittings and connectors to customize the watering tributaries for your plants. * Use a hairdryer or hot water to soften the end of the tubing will make the connection easier..
  • VERSATILE GARDEN IRRIGATION KIT - Max. Water Pressure: 20 psi. To ensure better watering, it is recommended to install each branch under....
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock

3/4 inch 3-Way PVC Pipe Fittings, PVC 3-way Fitting Connectors, Used for Building Furniture, Furniture Grade, White (12 Pack)

  • The 3/4-inch pipe fittings are made of high-quality PVC, with high plasticity, low temperature resistance, impact resistance and corrosion resistance. Furniture level, it has a higher manufacturing process than ordinary pipe fittings..
  • Furniture-grade PVC connectors are very suitable for DIY furniture, with smooth surfaces and tapered edges, you can use these PVC accessories to build any furniture you like..
  • Size: Fits 3/4 inch PVC pipe with an outer diameter of 1-1/16” or 1.050”.
  • Wide range of applications: These furniture-grade PVC pipe fittings are suitable for constructing swimming pool products, chairs, tables, shelves or garden supports, etc..
  • We sell the same series of DIY products, such as bottom brackets, tees, crosses, etc., which are convenient for you to make a series of DIY furniture. If you have any questions, You can contact us by email and we will help you at any time.
Check Stock

Habitech Irrigation Fittings Kit for 1/2 Tubing - 20 Piece Set - 6 Tees 6 Couplings 2 Elbows 6 End Cap Plugs - Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems

  • Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6....
  • These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit,....
  • The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with....
  • Save money and time buying everything you need at once in this 20-Piece Set. Jumpstart your drip irrigation system installation with this set of....
  • Easy and secure installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If....
Check Stock

TL TOOLEGIN DOT Brass Push to Connect Fittings 1/4" Air Brake Union Air Line Fittings Push in Fittings Brass Union Air Brake Repair Kit Contains Tube Push-in Tee Union Coupling Male NPT 90° Elbow

  • Unique Air Line Tubing Kit: The air brake fittings contains 2pcs 1/4” Unions, 2pcs 1/4’’ Tees, 2pcs 1/4” DOT Push-In × 1/4” MNPT, 2pcs 1/4” DOT Push-In × 1/8” MNPT 90° Elbow, 2pcs 1/4” DOT Push-In × 1/4” MNPT 90° Elbow..
  • High-quality Material: Our push in fittings are made of high quality brass CA360 CA377 , with corrosion resistance, high temperature ductility and low permeability..
  • Technical Parameter: The Working Pressure is from Vacuum to 250 psi, the Working Temperature is from -40° F to +200° F..
  • Easy to install: All fittings can be sealed by pushing the tube firmly into the fittings, and they are also simple to be removed from the tube..
  • Wildly Usage: The air brake union assortment kit can be used with air systems, copper tubing in air brake systems, which is perfect for garages, workshops and so on..
Check Stock

Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)

  • Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
  • Applications Include : Residential Patio Misting Greenhouse Humidification Commercial Outdoor Cooling Outdoor Restaurant Misting Industrial Misting.
  • Do it yourself misting system, easy to install, with Push to Connect Nickel plated fittings, rated for 1800 PSI..
Check Stock

RAPIDAIR FASTPIPE F28090 1' Fastpipe Master Kit, 90', 1', Blue

  • Aluminum pipe with nylon compression fittings.
  • 90 ft of 1 Inch pipe (12) 7 ft. 6 in. Pieces.
  • (7) unions, (5) elbows, (2) tees, (20) clips, tools, (3) outlets, (1) threaded adapter x 3/4 male NPT.
Check Stock

Hromee Air Line Tubing Kit, 1/4 Inch (6.35MM) OD x 32.8 Feet Polyurethane PU Tube and Push to Connect Fittings, 14 PCS Compressed Pipe and Accessories Kit

  • DIY AIR SYSTEM - Hromee compressed air outlet kit allow you to design and install your own pressurized air system. No more dragging the compressor and reconnecting air hose. It helps you keep the working room clean and ordered..
  • Inner Diameter: 4.15mm. Max Working Pressure: 120 PSI.
  • Bursting Pressure: 360 PSI. Working Temperature: -4℉- 149℉. PU material provides the high flexible and oil resistant..
  • CONNECTORS - All the connectors are designed push to connect that is easy to remove and offering good sealing. The kit includes 2 Splitters, 2 Elbows, 2 Tees and 2 Unions. 4 male straight fittings fit 1/4" Tube OD and with 1/4" NPT Thread. The thread need to be seal taped to avoid leakage..
  • EASY TO USE - All the fittings work by simply pushing the tubing firmly into the the fitting to seal and removing the tubing is just as simple. Cutting tool is included for meeting your tube length requirements..
  • Ultimate Flexibility: Customer can purchase additional fittings to customize your air line installation, based on your space and compressed air requirements, which is a perfect solution for garages, workshops, barns, etc..
Check Stock

Supply Giant QYSU1112-OM PEX Barb Reducing Tee Pipe Fittings 1\ x 1\ x 1/2'' Brass

  • Reducing Tees for sizes 1" X 1" X 90 Dedree 1/2" of Pex Pipes.
  • HIGH QUALITY: Constructed of lead free (DZR) brass for superior reliability and strength.
  • EASY TO USE: Fittings Work with Crimp Ring or Clamp Connection Methods.
  • Barb x barb x barb connection for PEX plumbing systems, Rated to 200°F and 200 PSI.
Check Stock