Best Fine Thread J bolts

SMOOTHERPRO Bolt Action Pen Decent Stainless Steel Compatible with Pilot G2 Refill Durable Stainless Steel Clip for EDC Pocket Design (SSG050)

  • ...smooth bolt action design for retracting refill to avoid the mess-up your pocket, notebook or backpack by gel ink.
  • also, the bolt action is a great fidget gadgets when you are stressed at design or daily work, the bolt action function will help you to reduce the stress..
  • This bolt action (PREGLUED BOLT, BUT ADD SOME THREAD GLUE TO THE THREAD OF BOLT IF YOU NOTICE ANY SIGN OF LOOSE BOLT) pen is specially designed and compatible with Pilot G2 Gel Refill, which provide you an excellent writing experience with gel refill and also, the refill is easy to get online and supermarket. The pre-installed refill in this Pen is G2 Gel Fine Point Refill, line size 0.5mm..
  • Finely CNC machined body and threads for decades of use, a decent inexpensive heavy duty metal pen with Stainless Steel Clip for your own use or give to friends or family as pen gift. Well buffed to avoid potential cut during your EDC use with unsurpassed quality control..
  • Constructed with heavy weight full metal stainless steel 316 grade solid bar.
  • unbreakable body with balanced weight for writing and holding. Extra weight is ideal to be used in tremor arthritic hands, excellent writing aid for elderly, carpal tunnel, parkinson’s and other people who need a heavy duty pen. Elegant and great looki....
Check Stock

Lkonwee Bicycle Crank Puller Remover Extractor– Repair Wrench Tool fit Threads and Square Taper Bottom Brackets Including Including SRAM PowerSpline,Bosch BNI and FSA Power Drive

  • 【Material】: Made of heat-treated steel to ensure years of use..
  • 【Compatibility】: Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles.Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt.Including Bosch BNI and FSA Power Drive..
  • 【Function】:Strong rotating tip system ensures smooth operation and long life.It uses a long, comfortable handle and a fine thread for the leverage needed to remove tight crank arms..
  • 【NOTE】: Does NOT fit ISIS or Octalink crankset.
  • 【Easy to use】:1. Remove the crank arm fixing bolt from the crank arm - 2. Use your hand or crescent wrench if needed to thread the bottom bracket tool all the way onto the bicycle crank - 3. Rotate the integrated handle clockwise until the crank arm is freed from the bottom bracket spindle.
Check Stock

The Hillman Group 44351 1/4-20 Cage Nut, 12-Pack

  • Commonly used to mount equipment in a square-holed rack.
  • Ensures secure bolt assembly, even in an off-center position.
  • Included parts range from #8-32 to 5/16-18 in fine & coarse thread sizes.
  • Assortment also features M6-1.00 coarse threaded metric cage nut variants.
  • Zinc finish for improved corrosion resistance.
  • These zinc-plated cage nuts feature coarse 1/4"-20 thread and fit a panel range from 0.093" to 0.126".
Check Stock

Retisee 28 Size 4'' x 20'' Bolt and Nut Identifier Gauge Nut Black Bolt Size and Thread Identifier Thread Pitch Gauge Standard Inch and Centimeter Ruler

  • Easy to Identify: 28 size nut and bolt identification tool ruler is easy to distinguish between metric and inch thread sizes, and can verify the sizes and thread pitches of standard hardware, so you don't need to worry about the size of fasteners you have any more.
  • Metric Thread Sizes: -M4 x 0.7 -M5 x 0.8 -M6 x 1.0 -M7 x 1.0 -M8 x 1.0 -M8 x 1.25 -M10 x 1.0 -M10 x 1.25 -M10 x 1.5 -M12 x 1.25 -M12 x 1.5 -M12 x 1.75 -M14 x 1.5 -M14 x 2.0.
  • Bolt Size and Thread Gauge: bolt and nut identifier gauge measures the bolt length and nut diameter quickly, and identifies hardware from #6 to ½" and 4mm to 14mm.
  • Each size has internal thread for bolts and screws, as well as external thread for nuts and washers.
  • The thread gauge is about 4 x 20 inch, which has multiple mounting holes, so you can choose to put it on the workbench, fix it in the toolbox, or install it on the wall.
  • Double Scale: the bolt and nut identifier has inch and centimeter scales on the edge, so you can identify the length of nuts, washers, bolts and screws quickly.
  • Sturdy and Durable: the bolt identifier is made of ....
Check Stock

SST Identibolt Bolt and Nut Identifier Gauge

  • "QUICKLY IDENTIFY BOLTS AND NUTS - The SST Identibolt is your One-stop Shop for Verifying the Size and Thread Pitch of All Your Standard Hardware! Never Again Wonder What Size Fastener You Have! Easily Distinguish Between Metric and Inch Thread Sizes, and Quickly Measure Bolt Lengths and Nut Diameters (Unless You'll Miss Making Multiple Trips to the Hardware Store)".
  • ULTIMATE NUT AND BOLT IDENTIFICATION TOOL - The Identibolt Measures Common Imperial SAE and Metric Thread Sizes, Identifying Hardware from #6 to ½" & 4mm to 14mm. Each Size is Accompanied By a Male Thread (for Nuts and Washers), and a Female Thread (for Bolts and Screws)..
  • DURABLE AND BUILT TO LAST - SST's 4"x20" Solid Metal Plate Construction is Hard Anodized for Maximum Thread Strength, With Laser Etched Markings that Will Never Fade or Get Scratched off. Multiple Mounting Holes Give You the Option to Wall Mount it, Secure it in Your Toolbox, or Keep it on Your Workbench!.
  • TWIN RULERS - Inch and Centimeter Rulers on the Bolt Identifier's Edge Help to Quickly Identify the Length of Your Bolt, Screw, Nut, Washer, or Will to Live. Measure Your Hardware Correctly the First Time and Never Make a Second Trip to the Hardware Store Again..
  • UNMATCHED WARRANTY - Masterfully Machined from 6061 A....
Check Stock

Lock Nut Assortment [1/4\-20,3/8\-16,5/16\-18,1/2\-13,#10-24,#8-32], VIGRUE 304 Stainless Steel Nylon Insert Hex Lock Nuts & Washers Kit SAE, 240PCS

  • Finished nuts are six sided nuts of standard thickness vs heavy duty hex nuts.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Use with washers to help distribute the load (not included).
Check Stock

Steel Hex Nut, Zinc Plated Finish, Class 6, DIN 934, Metric, M2.5-0.45 Thread Size, 5 mm Width Across Flats, 2 mm Thick (Pack of 100)

  • Finished nuts are six sided nuts of standard thickness vs heavy duty hex nuts.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Use with washers to help distribute the load (not included).
Check Stock

SINGER 06542 Class 15J Bobbins, Transparent, 3-Count

  • Set of 3 Class 15J transparent plastic bobbins.
  • Class 15J bobbins are compatible with Singer Futura Embroidery Machines series 2600s, 3900s, 7400s, 8700s and Izek 1500.
  • Never add sewing thread to a partially wound bobbin as it may be uneven and cause thread to tangle or break.
  • Singer 15-J bobbin is a genuine singer part and is specially made to fit touch and sew, companion, confidence and futura embroidery machines.
  • This includes series 8700, 7400, 3900, 2600 and Izek 1500.
  • Always use Singer 15-J Bobbins on these machines.
  • These are high quality premium sewing machine bobbins and each package contains (3) 15-J transparent bobbins.
Check Stock

53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA

  • Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
  • Ideal for restoring the stripped threads on old, rusty nuts and bolts.
  • Hex shape makes taps and dies easy to turn with any socket or wrench.
  • Can be used on national coarse, national fine and metric nuts and bolts.
  • Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.
Check Stock