Best Field 1310nm Optical Transmitter

uxcell 10dB SC Fiber Optic Attenuator, SC/UPC Female to SC Male Single Mode 9/125 Adapter

[MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

ESSENTIAL KIT: This tool kit provides everything you need to provide a stable light source and measure the relative optical power of fiber optic cables.
POWER METER (FPM-50A): Measure single-mode wavelengths from 800-1650 nm with relative power ranging from -50 to +26 dBm.
LIGHT SOURCE (FLS-50): Provides a stable light source at 1310 nm or 1550 nm wavelengths for the optical power meter.
INCLUDED ADAPTERS: Includes FC, SC, and LC adapters for both power meter and light source for PC/UPC connectorized cables.
INCLUDES: FPM-50A Power Meter, FLS-50 Optical Light Source, and H-22 Carrying Bag with Straps.

[MAIN PARAMETER]: SC/UPC Female to SC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

[MAIN PARAMETER]: SC/UPC Female to SC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Fiber Cable Description: OM1 LC to LC Plenum Fiber Patch Cable 12 Meter | OFNP Duplex LC LC Multimode Fiber (MMF) Patch Cable 62.5/125 Corning optical fiber core/cladding. Ceramic ferrule LC fiber connectors. High bandwidth fiber for high speed, low loss, data transmission. Orange, 2.0mm outer diameter, zip-cord reinforced, jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
Fiber Patch Cable Details: 12 Meter (39.37 feet), Duplex (2 fiber), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic cor....

✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....

[MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

【Connector Type】 20dB attenuation amount, FC-APC Female to FC-APC male attenuator, adopting high performance attenuated fiber.
【Operation Wavelength】This attenuator is suitable for both 1310nm and 1550 nm single mode fiber connection.
【High Attenuation Precision】 Attenuation precision: ±10%, when connector attenuation amount003e5dB.
【Transmission Stability】 Reflectance: dB≥50, which ensures the optical power stay in a stable level on its original transmission wave..
【Easy Installation】 The simple and compact structure make it very user friendly, just need plug and play for installation.
【Product Application】 Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation etc..