Best Fiber Optical Power Meter

Rsrteng A86 CCTV Tester IP Camera Tester 8MP CVI TVI AHD Camera Tester 7inch TFT Touch Screen IPC Tester Support POE RS485 PTZ Digital Multi-Meter Optical Power-Meter

  • 【A86 IP Camera Tester】A86 7 inch IPS TFT HDMI Tester,Silicone button,Backlight brightness. 1920x1200 high resolution 4K Camera Tester. 7in1 CCTV Tester,added Optical power meter,TDR cable test and Digital multi-meter functions.Support PoE IEEE802.3af, maximum power 25.5W,2.4G and 5G w-i-f-i frequency band, the camera tester tool will make your installation process simple and efficient..
  • 【IP Camera tester 】Max 4K 8MP /H.265/H.264 IP camera test. Support serial connection.
  • Ethernet test 10M/100M/1G Ethernet link detection,Interface dual-port RJ45 Ethernet.Support IP setting,camera discrovring,ueser authentication,image viewing,PTZ control,modification of camera parameter.Compatible with IPC protocol ONVIF, RTSP, RTP,multi-brand IPC test..
  • 【HD Coaxial Camera test】Support Max 8MP TVI/CVI/AHD camera test.PAL/NTSC video test signal,HDMI I/O,Audio input, Baud 150-19200bps, compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic etc..Support Coaxial PTZ control and call OSD menu,Digital zoom,Full screen display..
  • 【Multi-function tester】OPM --- Used to measure absolute optical power or relative loss of optical power through a section of optical fiber.TDR --- Testing the length of network cable (4 pairs),The maximum lengt....
Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Armored 100Gb LSZH Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g qsfp+ 100gbase mmf ofnr lc-lc

  • Fiber Cable Description: Armored OM4 LC to LC Fiber Patch Cable 3 Meter | 100Gb Duplex LC LC Multimode Fiber Patch Cable 50/125 Corning optical fiber core/cladding. Ceramic ferrule LC to LC fiber patch cable connectors. High bandwidth 100G multimode optical fiber for high speed, low loss, data transmission. Armor wrapped aqua 2.0mm diameter, OFNR jacket, zip-cord. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Laser Optimized MMF Zip-Cord Reinforced, Multimode LC to LC Armored Fiber Optic Patch Cable, Fiber Jumper Cord.
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Eth....
Check Stock

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dx Yellow Zip-Cord PVC ofnr lc-lc

  • Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 3 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) – 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications....
Check Stock

New Upgraded Network Cable Tester with Optical Power Meter VFL, RJ45 Wire Cable Tracer for Telephone, Ethernet, Video, Tone Generator,CAT5 CAT6 Cable Toner Ethernet Cable Tester PoE

  • Anti-interference Network Cable Tester: Adopt advanced digital/analog/POE mode, high sensitivity, less noise interference, easy to accurately locate the target cable, widely used in engineering wiring, network and equipment maintenance.
  • Optical power Meter Test & Port Flashing: Connect the network cable to be tested to the transmitter, the wire tracker will automatically detect the optical fiber frequency and the port indicator will flash on the same screen, which can display the working speed of the port, which is convenient for accurately locating the line and port..
  • Multifunctional Network Cable Tester: There are nine features to meet your needs. Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing, optical power meter, VFL function, and NVC function..
  • PoE Testing: PoE testing can check cable mapping polarity and voltage of PoE network switches, withstand 60VDC. Automatically detects and switches between 10M/100M/1000M modes. Includes cable tracking, short circuit test, interruption of circuit test and etc.
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
  • ✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
  • professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
  • ✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....
Check Stock

FiberCablesDirect - 3M OM2 LC SC Fiber Patch Cable | 1Gb Duplex 50/125 LC to SC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1gb 10gb mmf upc sfp+ 1gbase mmd dplx pvc ofnr om2-lc-sc

  • ...einforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to SC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 - Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm | 10Gb Ethernet Distance is 82 Meters at 850/1300 nm..
Check Stock

FiberCablesDirect - 3M OS2 LC LC Fiber Patch Cable | Simplex 9/125 LC to LC Singlemode Jumper - 3 Meter (9.84ft) | Length Options: 1-3M | single-strand smf smplx lc/lc 10gbase 1f yellow ofnr pvc lc-lc

  • Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 3 Meter | Simplex (1 fiber strand) Single Mode fiber optic patch cable, 9/125 Corning optical fiber glass, yellow OFNR Riser Rated PVC jacket, 2.0mm outer diameter, zip-cord reinforced. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Simplex, 2.0mm Outer Diameter, Zip-Cord Reinforced, SMF (Singlemode fiber) Patch Cables / Jumper Cords..
  • Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Mode Type: OS2 (9/125 Singlemode) – 9 micron core, 125 micron cladding. 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, data services supported. ISO / IEC 24702.
Check Stock

FiberCablesDirect - 1M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lc-upc sfp 1gbase mmd dx pvc ofnr lc-lc

  • ...Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 1 Meter (3.28 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
  • Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected....
Check Stock

FiberCablesDirect - 5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 5 Meter (16.40ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

  • Fiber Cable Description: OM4 LC LC Fiber Patch Cable 5M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
  • Fiber Patch Cable Details: 5 Meter (16.40 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Check Stock