Best Fiber Cement Tile

Ghostrunner - PlayStation 5

Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
Perfect for slicing through fiber cement board and laminate flooring.
Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.

Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
Cuts up to 9,000' or 5 stacks of fiber cement.

Fullclean motor head is made to compatible with most Dyson V15 V8 V7 V10 Vacuum Cleaner,not for V6 or any DC,ball series.Compatible with V15 V8 V7 V10....
Carbon Fiber Brush Roll:the motorhead is built with carbon fiber brush roll that picks up hair easily.Easy to disassemble,replace,and clean..
Easy Installation:Work with vacuum cleaner directly with the quick-release button or with the extension wand..
Move Smoothly:the motorhead brush tool moves and turns around smoothly with flexible connector and a stable wheel..
For multi-surface flooring:fits laminate,cement,tile,vinyl,hard wood,stone,marble flooring,also fits for carpet..

✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" or 330mm Width, Up to 5/8" or 15.80mm Thickness on Engineered Wood Floor, VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor, Vinyl Plank Floor and Rigid Core Vinyl Plank, also Cuts PVC Tile, Vinyl Tile, Fiber-Cement Board Siding, Vinyl Siding, Pressboard Lap Siding, Carpet Tile, Leather, Rubber Base, Rubber Tile, Soft Plastic.
✅OUTSTANDING VALUE: No Dust, No Noise, No Electricity Needed, Easy and Professional Cutting on Vinyl Floor, NO Go Out and In House, NO Go Up and Down Stairs, Time and Labor Saver..
✅SAFE OPERATION: Includes CUTTEREX Knee Pads, Stay Protected, Stay Safe! Dust Free, Quick & Quiet. Long Handle for More Cutting Power Made Operation Easy..
✅CUTS MOST SHAPES ON FLOOR: Straight Cut and Cuts at 0-45° Free Angles.
✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Angle Indications on Support Table, Integrated Straight Cutting Fence..

For Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and more, up to 510mm (20”)....
The max. cutting length: 510 mm (20 "), and max. cutting depth: 16 mm (5/8 ").Angle Cutting: 0-45,it will cut at 45 degrees on a 14 inch plank..
A shear blade , included a 600 Grit oilstone to keep sharp..
Straight cut and 45 degree angle cut. Clean and Straight cutting edg.（Fingers away from the sharp blade!）. No electricity, no dust, quick, quiet....

1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
Continuous cutting edge for smooth cutting even in wood lath and plaster.
Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit for straight cuts.
SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.

1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
Continuous cutting edge for smooth cutting even in wood lath and plaster.
Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model for straight cuts.
SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.

Product dimension: Left blade & right blade: 4-7/8” X 3/14’’ (12.5 cm X 1.9 cm).
center blade: 5-5/8’’ X 2’’ (14.3 cm X 5 cm).
hex bolts length: 1-7/16’’ (3.6 cm). Compatible with SHALL (SH111007AE) and other electric fiber cement siding shear that have the same structure and size of cutter head.
Cutting capacity: Cutting up to 5/16” (8 mm) cement board, tile board, backer board and etc. In addition, applicable for cutting cement board, hardie backerboard, shower backerboard, waterproof backerboard and so on. Multi-functional, meeting most of your cutting needs.
Double-cut blade: Double cut design for creating a 5/16” (8 mm) curled thin strip, delivering fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, this replacement’s advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
Premium material: Blades are made of superior alloy steel, anti-rusting. Heat-treated: 55-60HRC. High strength bolts (Specification: M5, Strength: 12.9).
What including: 3 blades (left blade, center blade, right blade), 2 bushings, 3 head bolts.

NORSKE'S 3RD GEN FLOORING & SIDING CUTTER, ONE OF KIND AND MOST UNIQUE.
CUTS A VARIETY OF MATERIAL, INCLUDING FIBER CEMENT BOARD (HARDIE PLANK), LAMINATE & VINYL FLOORING, ENGINEERED WOOD FLOORING, VINYL TILE & SIDING UP....
SLIDING EXTENSION TABLE SUPPORTS LONGER BOARDS (41” WORKING LENGTH).
ADJUSTABLE MEASURING GAUGE PROVIDES QUICK REPETITIVE CUTTING.
HEAVY DUTY 22” ALUMINUM FENCE FOR ACCURATE CUTTING.