Best Female Adapter Fittings

Under Sink Water Filter Install Kit, Complete Filtration System for Kitchen and Bathroom Faucets

Enjoy crisp and clean filtered water directly from your sink faucet!.
QUICK & EASY INSTALLATION – Ready in less than 20 minutes. The PureWater Filters® Under Sink Water Filter Kit comes with everything you need, including easy to follow instructions and graphics. The included Quick-Connect fittings offer fast and secure leak-proof installation..
CLASS 1 FILTRATION MEDIA – NSF Certified and Tested for NSF/ANSI Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I..
MADE IN USA – Includes FREE Lifetime Warranty for Defective and Malfunctioning Parts. A PureWater Filters® Lifetime Warranty registration card is included in every box..
INCLUDES: Inline Water Filter with 3/8” Leak Proof Quick-Connect Fittings, 5 Feet of 3/8” NSF Polyethylene Tubing, 3/8″ to 1/2″ Female Connector, 3/8″ to 9/16″ Female Adapter, 3/8″ to 9/16″ Male Adapter, Mounting Bracket with Screw, and Easy-to-Follow Installation Instructions..

Check Stock

BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings

[Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
Use to evacuate a flooded yard, pump out water from a barrel, and more.
[Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
Fittings designed to fit standard garden hose spigot.
[Use Your Pump]: Threaded brass ends for use with your water pump.
Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
[No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
[Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.

Check Stock

Boltigen Self Sealing R134A Can Tap Valve Refrigerant Dispenser with Tank Adapter for 1/4 and 1/2-inch AC Freon Charging Hose

【ECO-DESIGN】The feature of our can tap is：self sealing. It is easy to open R134a can throgh the R134a can tap and safely turn off R134a can to reserve for future use without any waste.The eco-friendly design meets EPA enviroment friendly policy..
【WIDE COMPATIBILITY】Our r134A can tap fits R-134a cans with ACME threads to directly connect 1/4" SAE (R12 R22) female fitting AC charging hose .Come with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac charging hose..
【SAFE QUALITY】Round smooth handle for easy operation, body made of heavy duty brass and premium anodized aluminum to last under extreme conditions..
【APPLICATION】The can valve connect to R-134a cans with 1/2-16 ACME female threads, the other end of the R134a can valve connects with 1/4 SAE female fittings ac charging hose..
【SERVICE】Our QC department do 100% quality inspection on the R134A can adapter before delivery. We will do 100% refund if the R134a valve tool is defective. If you have any questions about the can tap you have bought, please feel free to connect us. Your valuable suggestions and advice will be greatly appreciated by our team..

Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..

Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

[Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
[Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
[Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
[Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
[Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.

Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

...UE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.

Check Stock

3 Pack NPT 1/2"Male x G1/2" Female Brass Pipe Fitting Reducer Thread Adapter

Machined Brass material make it strongest construction for prolonged service life..
1/2 inch NPT Male Pipe to 1/2 inch Female Pipe,3 pack adapter..
Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Brass adapter has a male NPT threaded end,Female G threaded end,and connects hoses or fittings of different types..
Suitable for bathroom&kitchen faucet connection, bathroom shower connection..

Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..

Check Stock