Best External Vent Valve

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....

Check Stock

PCV Crankcase Breather Ventilation Valve Hose Gaskets for VW Jetta Passat GTI Audi TT A3 A4 2.0T 06F129101P

【Compatible With】2006-2008 Audi A3 2006-2009 Audi A4 2009-2015 Audi TT Quattro 2007-2009 VW Eos 2006-2008 VW GTI 2007-2008 VW Jetta Passat 2006-2009 VW Rabbit.
【Replacement for】06F129101P, 06F129101E, 06F129101G. Please check the part numbers whether it suits your vehicle before purchasing..
【Package Including】This crankcase vent valve breather hose kit includes Pressure Control Valve (PCV), Breather Tube, PCV & Breather Tube Gaskets,Breather Tube Clamp.
【Functions】TOP quality Engine Crankcase Vent Valve, also known as PCV Valve or Oil Separator, works to evacuate gas from the crankcase of the engine, improving emissions and the overall operation of your vehicle..
【NOTICE】 Please properly verify the Year/Make/Model before purchasing this product.If you have any questions with crankcase for Volkswagen, please do not hesitate to contact us..

Check Stock

Advantec 353130 Vacuum Filtration Manifold Stainless Steel 3-Branch with 3-Way Valves

Three-way valve enables you to vent the branch to atmosphere without breaking the vacuum connection|three-way valve vent is a female luer slip connection to accept a standard syringe filter.
Two- and three-way valves feature ptfe stopcocks for smooth control|valves provide independent control at each branch for vacuum and venting|connect three or six filter holders to one vacuum source.

Check Stock

CHIKADIV C400 Mini Scuba Tank Refillable Oxygen Cylinder with 1L Capacity Scuba Tank with 15-20 Minutes Underwater Diving Gear for Diver Portable Diving and Snorkeling Equipment C5 Green

️【15-20mins Underwater Experience】Chikadiv mini scuba tank has 1L capacity. You can stay up for 15-20 minutes underwater with total freedom. The usage time will be affected by external factors such as temperature, diving depth and breathing rate..
️【Better user experience】Chikadiv mini scuba tank adopted the air switch valve that extends the gas storage time in sealed. The design of constant pressure valve is more in conformity with our breathing rhythm. In addition, explosion-proof valve is safer. When the inside pressure exceeds 5000PSI, it will automatically vent to reduce pressure..
️【Various Inflation modes】The 8mm one-way inflation valve of scuba diving tank can connect the refill adapter to fill up. Usually, you can use a bigger bottle to guide vials. Also, you can use the high-pressure hand pump or electronic pump. Using the hand pump is a little difficult for us, so it is just as the alternate inflation method. The electronic one takes about 15 minutes. In addition, if there is a diving store, you can ask for help..
️【Quality Guarantee】The whole bottle of scuba tank is made of 6061 aviation ....

Check Stock

Part# 06H145710D Turbo Diverter Valve For A3 A4 TT Quattro Volkswagen Jetta Passat Beetle CC Eos GTI - Replace Part Number 06F145710G

The diverter valve is usually located on the side of the turbocharger. The purpose of the diverter valve is to vent excess boost when the throttle is closed (you lift off the accelerator or change gear). Without venting this excess pressure, the turbo experiences surge which is actually damaging to the turbo..
By the same token, when the throttle is open and you are building boost, this valve must stay shut and not vent boost from the high pressure side to the low pressure side. Venting this boost under wide open throttle causes a boost leak and a drop in power..
This Turbo Drivter Valve fits for 2006 - 2011 A3, 2010 - 2013 A3 Quattro, 2005 - 2013 A4 , 2005 - 2013 A4 Quattro, 2008 - 2009 TT, 2009 - 2011 TT Quattro, 2009 - 2011 Volkswagen CC 2.0L L4, 2007 - 2011 Volkswagen Eos, 2006 - 2011 Volkswagen GTI, 2006 - 2010 Volkswagen Jetta, 2006 - 2010 Volkswagen Passat, 2012 Volkswagen Beetle 2.0L..
Customers also can find the product you need accurately according to the OE number. OEM Number: 06H 145 710 D, 06F 145 710 G, 06F 145 710 C, 06F 145 710 B, 06H145710D, 06F145710G, 06F145710B, 06F145710C..
If the valve is defective or inadequate, you will get a loss of boost, extended lag or a throttle response that is sluggish, the turbo charger will wear out soon ....

Check Stock

Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000

40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700

27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 14 Gallon RV Waste Black Water Holding Tank WT-1400

14 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 31 Gallon RV Waste Black Water Holding Tank WT-3100

31 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock