Best External Ssds

EZDIY-FAB Quad M.2 PCIe 4.0/3.0 X16 Expansion Cad with Heatsink, Support 4 x PCIe NVME M.2 SSD, RAID-on-CPU (VROC) in Intel Platform and PCIe 4.0 RAID in AMD Platform, M/B PCIe Bifurcatin is Required

The card supports the use of 4 NVME M.2 SSDs simultaneously, but the motherboard must be equipped with PCIe bifurcation function, and be able to set PCIe X4X4X4X4 or 4X4 mode..
M.2 SSDs will generate a lot of heat when working at the same time. The configuration of large heatsink can quickly dissipate the heat, so that the M.2 SSD can maintain a stable working state..
Assemble four M.2 SSDs, It is recommended to use NVME M.2 SSDs of the same model..
Suitable for NVMe SSDs of different sizes including 2230,2242, 2260, 2280..
This card does not have the RAID function, only supports the motherboard to read four M.2 SSD SSDs at the same time. To set up hardware or software RAID, you need to refer to the motherboard configuration and setup tutorial..

Supports 2 x 2.5” SATA HDD/SSD, from 5-15mm height.
Installs into any standard external 1 x 5.25” optical drive bay.
Built-In JMS562 hardware RAID 1 mirroring (SAFE) chipset.
Easy to read RAID status LED indicators for drive power, access, fail, and RAID 1 rebuilding process.
EMI Grounding – protects HDDs/SSDs from electrical damage.

Create high-performance storage with configurable RAID by installing two M.2 SATA SSDs into a 2.5 SATA interface.
Dual-Slot M.2 to SATA Adapter supports multiple RAID modes: RAID 0 / RAID 1 or spanning or JBOD.
Supports B key M.2 SATA SSDs including full-length M.2 SSD drives (2230 / 2242 / 2260 / 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).
TRIM support to enhance the stability and performance of your M.2 SSDs plus provides SMART support.
M.2 Adapter / M.2 SSD Adapter / M.2 SATA Adapter / Dual M.2 to SATA Adapter / M.2 Drive to SATA Adapter / Dual SSD Adapter / M.2 SATA SSD / m 2....

Interface: USB-C (Compatible with all USB and Thunderbolt 3 & 4). It is not compatible with Thunderbolt 2 or earlier..
Accepts SATA 2.5" solid state SSDs or conventional hard drives (up to 9.5mm).
Asmedia 235CM controller with UASP/TRIM support.
Bus-powered or external adapter (optional).
Includes: MiniPro, 16-inch USB C-A cable with Type-C adapter, User Guide.

5Gbps: The maximum transmission rate of 2.5in hard drive enclosure is 5Gbps, which is fast, and the hard drive enclosure can support UASP accelerated transmission protocol, which greatly improves the storage or backup efficiency of the device..
Scratch Resistant: Hard drive Enclosure preserves hard drives from external scratches and makes SATA hard drives easy for data storage..
Support System: External HDD case adapter supports for Windows,for LINUX,for OS X 8.0 and above. Designed for 2.5in 7mm/9.5mm SATA HDDs and SSDs up to 2TB..
Plug and Play: HDD enclosure tool free installation, no driver required, just push out the cover, insert the drive, close the cover, support hot swap, no additional power supply required..
Wide Compatibility: USB3.0 hard drive enclosure can easily connect 2.5in SSD and HDD to PC,Laptop for data transfer or expand storage..

IMPORTANT NOTE: Compatible with the Flash SSD module used in the 2012 / early 2013 13" and 15" MacBook Pro with Retina Display models only and NOT for use with any other SSD modules, including the OWC Aura and Aura Pro 6g SSDs. *Requires USB 3.0 standard powered port. USB 2.0 use not supported or recommended.
ULTRA-PORTABLE, BUS-POWERED EXTERNAL SSD ENCLOSURE.
Outstanding USB 3.0 speeds up to 500MB/s, Award-winning aluminum design.
Compatible with: MacBook Pro Retina Model ID: MacBookPro10,2, MacBookPro10,1(13-inch early 2013, 15-inch early 2013, 13-inch late 2012, 15-inch mid 2012).

Passive heatsink for M.2 NVMe Next Generation Form Factor SSDs.
Brings 7-30°C improvement in SSDs temperatures.
Compatible with all single-sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long).

Fast Transfer: The maximum transmission rate of 2.5in hard drive enclosure is 5Gbps, which is fast, and the hard drive enclosure can support UASP accelerated transmission protocol, which greatly improves the storage or backup efficiency of the device..
Good Protection: Hard drive Enclosure preserves hard drives from external scratches and makes SATA hard drives easy for data storage..
Support System: External HDD case adapter supports for Windows,for LINUX,for OS X 8.0 and above. Designed for 2.5in 7mm/9.5mm SATA HDDs and SSDs up to 2TB..
Easy to Use: HDD enclosure tool free installation, no driver required, just push out the cover, insert the drive, close the cover, support hot swap, no additional power supply required..
Wide Compatibility: USB3.1 hard drive enclosure can easily connect 2.5in SSD and HDD to PC,Laptop for data transfer or expand storage..

Install two M.2 SSDs into a 2.5” bay to create high-performance storage with configurable RAID.
Dual M.2 SATA adapter with RAID supports SATA I/II/III (up to 6Gbps).
2x M.2 SSDs to 2.5in SATA (6Gbps) RAID adapter converter with 2.5in SATA form factor housing, provides TRIM support.
Dual M.2 SSD adapter enclosure with RAID 0 and RAID 1 plus Spanning and JBOD.
Broad compatibility with support for common SATA M.2 SSDs (2230, 2242, 2260, 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).