Best Extended Terminals

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

Glarks 8' 10-22 AWG Multifunction Wire Stripper/Crimper/Cutter and 175Pcs Twist Nuts Caps Electrical Wire Connectors Screw Terminals with 5Pcs Electrical Tape Assortment Set

  • ★【What You Get】: In this set, it include a 8" 10-22 AWG multifunctional wire stripper tool, 175pcs twist nuts caps electrical wire connectors screw terminals set, 5pcs black, green, blue, yellow, red electrical tape total 181pcs which are well packed in a box..
  • ★【8" Wire Stripping tool】: A specil tool with wide range use of cutting wire and screws, stripping cable and crimping terminals and connections. Tool is constracted with high-grade steel provides enhanced durability and extended life, chrome plating and blackened finish for resistance to rust and corrosion..
  • ★【Easy To Use】: As you can see on the tool, all of the functions and size guides are clearly marked and colour coded in hi-contrast etchings. Handle is designed with ergonomically large soft-grips which are comfortable to hold even long time use. Works great for multi-core flexible wires and copper, aluminum cables from 10-22 AWG, 0.8-2.6mm²..
  • ★【175Pcs Wire Caps Set】: Inluding 175pcs screw-on wire connector assortment with 5 color of grey, blue, orange, yellow and red, they are assorted packed in a plastic box. Widely used for electrical wires connecting, with cone shaped spring that holding the wires firmly together..
  • ★【5Pcs Electrical Tape】: Come with extra 5pc....
Check Stock

ConnectoRF Quick Interchangeable Ratchet Crimping Tool Kit with Plastic Case for Insulated & Non-insulated Wire Terminals Crimper With 5 Die Sets

  • 7pcs heavy duty ergo design interchangeable crimping tool kit for wire terminals, including one frame, 5 die sets for various applications, and one heavy duty plastic case..
  • Easy "push-to-release" tool frame. No extra tools are needed to change dies..
  • Die set#1 (HT-42C) For Non-insulated Terminals or Open Barrel Terminals AWG 20-18/ 16-14/ 12-10.
  • DIN 0.5-1/ 1.5-2.5/ 4-6 mm². Die set#2 (HT-42C3) For D-Sub Terminals AWG 24-30/ 18-22.
  • Die set#3 (HT-42E2) For Pin Terminals Insulated or Non-insulated Ferrules AWG 20/18/16/14/12/10/8/6.
  • DIN 0.5/0.75/1.0/1.5/2.5/4/6/10/16 mm². Die set#4 (HT-42H) For Insulated Terminals AWG 20-18/ 16-14/ 12-10.
  • Die set#5 (HT-42N) For Non-insulated Terminals AWG 18-16/ 14/ 12-10/ 8.
Check Stock

Astro Pneumatic Tool 9477 7-Piece Professional Quick Interchangeable Ratchet Crimping Tool Set

  • C Jaw - Open Barrel Terminals: for AWG 20-18/16-14/12-10 DIN 0.5-1.0/1.5-2.5/4-6mm², D Jaw - Insulated Cord-End Terminals (small AWG.): for AWG 22/20/18/16/14/12 DIN 0.5/0.75/1.0/1.5/2.5/4.0mm².
  • F Jaw - Insulated Cord-End Terminals (Huge AWG.): for AWG 10/8/6 DIN 6/10/16mm², H Jaw - Open Barrel Terminals & D-SUB, V3.5: for AWG 14/22/8 DIN 2.5-0.5/8-10mm².
  • Time saving tools allows faster crimping of terminals and wire. Crimper is easily operated by either left or right hand.
  • Ergonomically designed steel frame handles with contoured rubber grips.
Check Stock

Swpeet 240Pcs Bullet Connectors Kit, 3.9mm Brass Bullet Male & Female Wire Terminals Connector with Insulation Cover for Motorcycle Scooter Car Truck with Insulation Sleeve

  • HIGH QUALITY ---- Terminals made of brass plating tin, high conductivity, anti-oxidation, durable, high-quality plastic protective cover, insulated flame retard. The Insulation sleeve Made of high quality plastic, terminal wiring is completed, the protective cover put on it, the perfect effect of insulation flame retardant, safe and secure. High quality materials to increase your productivity..
  • EASY TO US ---- Only need the wire are connected to the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily, the male and female terminals can be disconnected when not needed. Save your work time and increase your productivity, you deserve to have them..
  • WIDE APPLICATIONS ---- We have prepared Molex connector Suitable for many applications, Such as car, motorcycle, truck, marine,quad bike,scooter, boats, electric instruments etc. In these specific applications, the work is very good and the work efficiency is high. Help you solve your actual problems..
  • PRODUCT INFORMATION ---- Male terminals size: 17.3x4mm, female terminals size: 17.6x4.6mm.
  • wiring range: 0.5-1.5mm. Electrical wire connector Color: Silver, Gold.
  • Size: 3.9mm.Come with male bullet terminals & male i....
Check Stock

Goldwood Sound GW-206/8 OEM 6.5″ Woofer 180 Watts 8ohm Replacement Speaker

  • 600 WATT POWER: This 8-inch car subwoofer has a power of 300 Watt RMS to 600 Watt peak that will produce high sound resonance. It also has silver-plated speaker terminals that will maximize sound quality while minimizing noise and distortion.
  • 60 OZ MAGNET STRUCTURE: Built with 60 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure – sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28″ mounting depth & 8.8″ overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker’s mechanical stability, increasing the life of the speaker.
Check Stock

OTC 4497A Ratcheting Terminal Crimper

  • Heavy-gauge steel crimping tool designed for insulated wire terminal sizes commonly found on cars, trucks, SUVs, Motorcycles, ATVs, and more.
  • Ratcheting action crimps terminals to correct tightness on the wire making crimping fast and easy.
  • Insulated handles with compound mechanical leverage for power.
  • For wire sizes: AWG 22-18 (0.6 mm -1.0 mm) red terminals.
  • AWG 16-14 (1.3 mm - 1.6 mm) blue terminals.
  • AWG 12-10 (2.0 mm -2.6 mm) yellow terminals.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Ampper 24 Pieces Battery Terminal Anti Corrosion Washers, Battery Terminal Post Fiber Washers Protector (12 Red and 12 Black)

  • Compatible: these battery anti corrosion washers are used for 6 - 12 V battery systems, for both top post battery terminals or side post battery terminals and cables..
  • Purpose: used for auto and marine batteries, prevent corrosion around the battery terminals, prolong battery life..
  • Washer size: the inner ring can be dismantled. Outer ring diameter: 45 mm / 1.77 inch.
  • inner ring diameter (before dismantling): 20 mm / 0.79 inch.
  • inner ring diameter (after dismantling) 31 mm / 1.22 inch..
  • Color: Red for positive terminals and black for negative terminals, very easy for distinguish and use..
  • Package: 24 pieces / 12 pairs battery terminal anti corrosion washers: 12 red and 12 black. 100% SATISFACTION: no reason for return or change..
Check Stock

WINOMO 5 Pairs 4 Gauge Strip Spade Terminal Spade Fork Adapters for Speaker Wire Cable

  • High quality insulated crimp fork terminals connectors, superior electrical contact.
  • 5 pairs of crimp terminals and connectors.
  • 5 red plus 5 black boots of crimpable fork terminals.
  • Premium copper heat tested, gold plated to protect against corrosion.
  • To ensure increased power flow and the highest quality audio without distortion.
  • 4 gauge power/ground wire fork terminals.
Check Stock