Best Excursion Boats

Image Dynamics IDMAX12 D2 V4 12" Dual 2-Ohm Coil Subwoofer 1000 Watts RMS

12" Dual 4 ohm ID MAX V.4 Series Subwoofer | Pressed paper composite cone woofer | Parabolic EPDM rubber surround | Over 2" long linear excursion | RaDiaToR cooling system for heat dissipation | Radiant Diametric Torsional Reinforcement | High compliance suspension design | Flat spider with NOMEX cloth woven tinsel leads | High-temperature flat wire, flat wound voice coil | Inverted dust cap with logo | Powder coated alloy proprietary basket.
Power Handling: RMS: 1200 watts | Recommended Power Range: 300-1200 watts | 3-1/2" peak-to-peak surround excursion.
Nominal Impedance (IMP): Dual 4 Ω | DC Resistance (Re): 3.0 Ω | Resonance Frequency (Fs): 27.77 Hz | Equivalent Volume (Vas): 72.16 L | Electrical Q Factor (Qes): 0.73 | Mechanical Q Factor (Qms): 2.98 | Total Q Factor (Qts): 0.58.
Frequency response: 20-250 Hz | Peak Excursion (Xmax): 39 mm | Force Factor (BL): 16.68 Tm | Piston Area (Sd): 545.0 cm2 | Sensitivity: 85.20 dB 1w/1m.
Sealed Enclosure Suggestion: 1 cu.ft. | Ported Enclosure Suggestion: 1.75 cu.ft. | Displacement: 0.14 cu.ft. | Mounting Depth: 8.15 in | Outside Diameter: 12.40 in | Cutout: 11.02 in.

...haft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a....

Replacement 4X4 4WD Auto Locking Hubs - Located on the front wheel hubs the 4WD actuators control power transferred from the axle assembly to the front wheels. This 4x4 locking hub fits both right and left front axles on your F250, F350, F450, F550 Super Duty and Expedition, Excursion, and Navigator..
Compatible Replacement for Ford & Lincoln - Fits both front left or front right wheel locking hubs on F250, F350, F450, F550 Super Duty 1999, 2000, 2001, 2002, 2003, 2004 - Excursion 2000 -2005 - Expedition and Navigator 2001-2002 - Includes model years 99, 00, 01, 02, 03, 04, 05.
Replaces Part# - Replaces part number 1C3Z-3B396-CB and 1C3Z3B396CB - While this is a not a genuine OEM part, it is a direct replacement for the factory 4WD locking hubs on the driver or passenger side of your F250, F350, F450, F550 Super Duty and Expedition, Excursion, and Navigator..
OEM Fit, Quality, Finish - This 4x4 front axle actuator is a direct replacement for the factory actuator. Each actuator comes pre-lubed for easy installation on the wheel hub and axle assembly. Save hundreds off dealer prices and restore the function of your 4x4 system with a new locking hub..
Lifetime Warranty - The 4WD Auto Locking Hubs comes complete with a lifetime warranty. If the locking ....

4000 W continuous program power capacity153 mm (6 in) split winding copper voice coil30 - 1000 Hz response96 dB sensitivity60 mm peak-to-peak excursion before damage.
Neodymium magnet allows a very high force factor and linear excursion Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power.
compression Aluminum demodulating ring for very low distortion.

16 mm xmax makes this one of the highest excursion 8" subwoofers on the market.
Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber.
Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area.
Dual linear stiffness spiders limit distortion and rocking modes.

Speaker type: Powered subwoofer with passive radiator.
Woofer: 1 x 10-inch high-excursion doped paper cone, Passive radiator: 1 x 10-inch high-excursion doped paper cone.
Crossover frequency: 50 to 150 Hz, continuously adjustable.
Maximum amplifier power: 400 Watts peak / 200 Watts RMS.
Height: 14.33 in., Width: 13.5 in., Depth: 13.5 in., Net weight: 32.1 lbs..

Fiber composite cone with exceptional stiffness-to-mass ratio moves massive amounts of air while starting and stopping on a dime with crisp precision.
Proprietary injection-molded extreme-excursion surround ensures flawless pistonic motion for pinpoint control and accuracy without distortion at the highest drive levels.
Dual ferrite magnet motor assembly with extended aluminum polepiece produces effortless on-demand driving-force for subtle and over-the-top bass thrills.
Powder-coated FEA optimized driver basket provides maximum rigidity tensile strength and thermal energy transference.
Dual-layer voice coil design enhances linearity and fidelity at full excursion while minimizing distortion and power compression.

Professional 500-Watt powered subwoofer for PA applications.
Powerful 18'' long-excursion transducer with high temperature voice coil provides incredibly accurate and pulse-pounding bass.
Precise reproduction of ultra-low frequencies for "bulletproof" punch and impact.
State-of-the-art 500-Watt Class-D amplifier with comprehensive over-excursion, thermal and clip limit protection.
Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers.