Best Evf Mount Smallrig

SmallRig RA-L65 Lantern Softbox Quick Release-One Step, 26in Light Modifier with Fabric Barn Doors, Softbox Diffuser for SmallRig Video Light 120B, 120D, 220B, 220D and Other Bowens Mount Light-3754

【One-Step Installation &Disassembly】: SmallRig light diffuser innovatively uses all-in-one design, the bottom hook is widened and raised, the special design help you only take 3 secondes to complet the installation(one step only). Compared to other ordinary softbox, SmallRig light modifier is easier and faster to install..
【Omnidirectional Light & Light Source Control】: Omnidirectional Light: Compared with square or parabolic softbox, the lantern light modifier can provide omnidirectional soft light source with 270° beam angle, so that you can fill the light without shadow. Light source control: SmallRig softbox provides four-side fabric barn doors, you can close 1~4 side according to your needs, flexible control light source..
【Soft Light Fabric & Solid Supporting Umbrella Rib】: Fabric – Using high-performance soft light fabric, adding high reflective coating, maximizes the high CRI of the video lamp itself, while bringing a 360°soft light effect. Supporting Umbrella Rib-Adopt 12 high toughness supporting umbrella rib, with high memory rebound characteristics, can withstand thousands of times of repeated disassembly use. Top chuck – Made of stainless steel for durability..
【Bowens Mount Compatiblity】: SmallRig lantern softbox comp....

Check Stock

SMALLRIG HDMI Cable Clamp for Blackmagic Video Assist Monitor Cage, G7/GH4/GH3 Cage, BMMCC Cage - 1693

SmallRig HDMI Cable Clamp 1693 can provide strain relief for Micro-HDMI cable where frequent tugging could cause damage to the camera. With only one screw to mount to the cage and lock the cable, it can save space for other accessories..
The HIDM Lock can only be used on SmallRig Cage 1779 (for Panasonic G7), SmallRig Cage 1773 (for Blackmagic Micro Cinema Camera), SmallRig 1585 (for Panasonic GH4/GH3), and SmallRig 1830 (for Blackmagic Video Assist 7" Monitor), SmallRig Cage 1726 ( for Blackmagic Video Assist 5" Monitor)..
Lock just use a 1/4"-20 screw on the cage, you could attach more accessories. The unsmooth surface (the part clamping the cable) of the cable clamp can increase friction in case of the accidental removal..
HDMI lock could be adjusted in width for Micro-HDMI cables of different standards..
Made of 6061 aluminum alloy, surface is very smooth after hard oxidation. Very comfortable to use. Please kindly read which camera cage it will be used on before purchasing..

Check Stock

SmallRig Multi-Functional Cold Shoe Mount with Safety Release 2797

【About SmallRig 2797】 SmallRig 2797 is designed for accepting shoe mount devices such as flashes, lights, microphones, etc. NOTE: This cold shoe mount only Compatible with products with cold shoe base and hot shoe without electronic contacts.
【1/4”-20 Screw】The cold shoe mount secures to rigs, brackets, and cages via a 1/4”-20 screw, and mounts to ball heads, magic arms, and monitor mounts via the integrated 1/4”-20 female thread.
【Safety Release Button】 Featuring safety release in one end prevents the accessory from detaching accidentally to ensure your devices safe.
【Compatibility】 Fits Any cages, ball heads, or any rigs features standard 1/4”-20 female thread and 1/4”-20 screw.
【Package Includes】1 x Cold Shoe Mount & 1 x Allen Wrench.

Check Stock

SmallRig Bundle: SmallRig Mini Follow Focus Kit, SmallRig Mini Follow Focus +SmallRig M0.8 Gears

START/STOP RECORDING: SMALLRIG Rosette Side Handle 3324 is designed to provide convenient record start/stop control for a stable and comfortable shooting experience. With an ergonomic design, the handle features a silicone gel record button on top where the thumb rests..
COMPATIBILITY: The rosette handle is compatible with multiple selected cameras, such as for Sony A7/A7II/A7III/A6000/RX100 Series, for FUJIFILM X-T3/X-T4, for Panasonic GH5/5S/G9/G95/S5/S1/S1R/S1/BGH1, and for Z CAM E2/M4/S6. Different cameras correspond to different control cables. Please check your model before placing an order..
360 DEGREE ROTATABLE: With an rosette for ARRI standard (M6, 31.8mm in diameter), it can be adjusted 360 degrees, easy to change position during shooting. NOTE: You need to purchase a SMALLRIG Rosette Mount 2804 separately to connect this wooden handle to a cage without a rosette mount..
DEDICATE DESIGN: The wooden handle is ergonomic design, it is comfortable to hold in the hand. The all-in-one wooden handle can improve the grip experience a lot..
NOTE: 1. The handle can only be used to control the recording, not to control taking pictures or focusing. 2. If you prefer to purchase a threaded side handle, please search for "SMALLRIG 3323". If you want a t....

Check Stock

Beginners Guide to Sony A7iv Basic Operations: A Simplified User Guide to Master your Sony A7 iv mirrorless camera

【FORMFITTING FULL CAGE】SmallRig A7S III Cage 2999 maintains access to the camera’s controls and hot shoe. Made of premium aluminium alloy, the cage is a solid piece of metal that is highly resistant to oxidation and stands the test of time..
【PERFECT PROTECTION】The cage incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4″-20 camera mounting screw so your camera can’t move around in the cage. SmallRig Cage 2999 also incorporates an anti-twist design with padding on the base to protect the camera from scratching..
【MULTIPLE MOUNTING POINTS】In addition to one cold shoe mount and multiple 1/4″-20 and 3/8″-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available lens adapter 1764..
【RECOMMENDATIONS】The cage is compatible with SmallRig universal accessory system. You can attach SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallR....

Check Stock

[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203

Not for 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer.
【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching.
【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc.
【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting.
【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “Smal....

Check Stock

SMALLRIG Camera NATO Handle Top Handle Grip with Anti-Off Designed Cold Shoe Mount and Built-in Hex Spanner for DSLR Camera, Camera Cage - HTN2362

【QR NATO HANDLE】SmallRig Nato Handle grip is designed to provide a comfortable handheld use for accessory such as monitor, microphone, light and magic arm. It is compatible with SmallRig Camera Cage such as SmallRig2203, SmallRig2254, SmallRig1889.
【ROTATING 360° AND ANTI-OFF DESIGN】The quick release handle rotates up to 360 degree and secures to any cage with nato rail on the top or side. The twist handle is equipped with two cold shoes. One of them in front features an anti-off button to protect your setup from slipping off.
【BUILT-IN SPANNER】The top handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. So that makes it very easy to use for balancing the camera for handheld use.
【ACCESSORY THREADS】The handle features multiple 1/4"-20 and locating holes for ARRI for accessory attachment, such as SmallRig Monitor Mount BSE2294, BSE2346 and Ballhead 1135.
【COMFORTABLE GRIP】SmallRig HTN2362 integrates with natural rosewood without any painting, which could make it more comfortable to use and provide a comfortable handheld shooting for cameramen.

Check Stock

SmallRig Mini V Mount Battery Plate V-Lock Mount Battery Plate with Crab-Shaped Clamp for Camera Power Supply - 2989

【mini V-Lock Battery Plate】SmallRig Mini V Mount Battery Plate with Crab-Shaped Clamp 2989 utilizing a standard V mount fits most V mount....
【Clamp Fits 0.6 to 1.2" Surface】SmallRig 2989 comes with a crab-shaped clamp that fits rod diameter from 15mm to 30mm to help mount a V mount....
【Multiple Mounting Points】The plate itself features two 1/4-20" countersinks, two 1/4-20" thread holes, and four M4 thread holes, which can be....
【Compatibility】The mount features a V-lock mount with a quick-release lever that fits most V-mount batteries but it is not compatible with PAGlink....
【Please Note】1. No V-Lock part (male) was provided with the plate. 2. In order to achieve the maximum compatibility of the crab-shaped clamp,....

Check Stock

SMALLRIG Monitor Cage with Sunhood for ATOMOS Shogun Inferno, Ninja Inferno, Shogun Flame, Ninja Flame 7 inches Monitors - 2008

FOR Atomos MONITOR: SMALLRIG Atmos monitor hood and cage 2008 is specially designed for Atomos (Ninja flame, Shogun flame, Shogun Inferno, Ninja Inferno). It included a monitor cage, a sunhood and a HDMI Clamp.
NOTE: SMALLRIG shogun inferno cage cage doesn’t fit Atomos Shogun and Atomos Ninja Assassin, if you need a cage for Atomos Shogun or Atomos Ninja Assassin monitors, please take a look at SMALLRIG Monitor Cage 1788.
FEATURES: All-around protection and multiple mounting points for Atomos monitors.The back of cage could help the monitor to dissipate heat. The sun hood ports are used to attach sunhood to shelter the monitor from sunlight.
AN-TI OFF: The SMALLRIG monitor cage includes SSD mount lock to prevent SSD from dropping in detachment. So don’t need to worry your SSD will fall off accidentally.
MOUNTING POINT: The monitor cage features NATO rails and 2 cold shoes. Besides, 1/4″ and 3/8″ threaded holes are accessible for SMALLRIG Magic Arm 2065/2066.

Check Stock