Best Evaporator Drain Plug

Diversitech A/C Secondary Plastic Condensate Drain Pan 30 x 30 Black 6-3030L

  • PLASTIC DRAIN PAN: Perfect for collecting condensate from cooling and evaporator coils to prevent damage in any indoor location where overflow from....
  • DURABLE CONSTRUCTION: Made of ABS plastic with rolled edges, reinforced corners, and a ribbed bottom for strength and rigidity.
  • SEAMLESS DESIGN: Constructed without seams to ensure there is no leakage or rust, even with continued use.
  • PVC FITTING INCLUDED: 3/4" diameter PVC discharge fitting is included with each pan for your convenience.
  • IDEAL SIZE: Measuring 30" x 30" and 2" in depth, this drain pan is the perfect size for your A/C unit.
Check Stock

Rectorseal 83919 Aspen Maxi Orange Univ Condensate Pump 11x7x2

  • EASY REMOTE INSTALLATION: Designed with a separate pump and reservoir, the two elements connect together with vinyl tube and a communication cable and features modular terminals for fast connection.
  • includes a pan mount, inline style reservoir and anti-siphon device.
  • QUIET AND HIDDEN: The complete assembly of the self-priming Maxi Orange is epoxy filled for resistance to shock, vibration, moisture, chemicals and promotes sound dampening.
  • designed for remote installation above ceiling or inside lineset cover if space permits.
  • REMOTE APPLICATION: Pump mounts outside evaporator, hidden in the horizontal lineset cover.
  • reservoir mounts in evaporator below drain pan.
  • SPECIFICATIONS: 50% 5 mins on / 5 mins off duty cycle.
  • 3A NC dry contacts rated @ 5A inductive at 230V AC.
  • FOR THE TRADESMAN: RectorSeal is recognized as a leading provider of quality solutions for the professional trades serving heating, ventilation, and air conditioning (HVAC/R), plumbing, electrical, and construction markets.
Check Stock

ACforCars Universal A/C Kit System (Without Compressor) Condenser 10x18, Cooling Fan 10', Underdash Evaporator Console Black, Drier, Fitting, Hose Bundle & O-Rings

  • UNDER DASH EVAPORATOR UNIT 13,000 BTU 4 Louver all BLACK Console, 24 Pass, Double Shaft Blower Motor 12V, Include Mounting brackets, drain hose and T, 15.7inL x 11.8inW x 5.7inH.
  • CONDENSER 10in X 18in 18mm depth COOLING FAN 10in 80W 12V RECEIVER DRIER Steel Black.
  • CLAMP for Drier SWITCH ORING Kit (5) #06 5/16 (5) #08 13/32 (5) #10 1/2.
  • HOSE Kit (6 FT) #6 5/16 (4 FT) #8 13/32 (5 FT) #10 1/2.
  • FITTING Kit #6 #8 #10 (Straight) (45 degrees) (90 degrees) (90 degrees w Service Port) & Hose Clamp.
  • Included components: UNDER DASH EVAPORATOR UNIT, CONDENSER, COOLING FAN, RECEIBER DRIER, CLAMP, PRESSURE SWITCH, O-RING Kit, HOSE Kit, FITTING Kit.
Check Stock

ZRM&E Plastic Cooler Drain Plug Leak-Proof Accessories for RTIC Coolers and YETI Coolers, Blue

  • The plug used in the lower part of the RTIC of the drain cooler has improved the radiator designed for the drain cooler. These can be used as replacements for drain plugs, all hard coolers of RTIC..
  • Replacement drain plug, suitable for RTIC cooler, improved finger knob design makes it easier for fingers to open and close the drain pipe..
  • Easy to flow, the sturdy drain plug allows your refrigerator to drain when it is partially opened..
  • The drain plug adopts a leak-proof design, which perfectly replaces the old or damaged cooler drain plug..
  • The replacement drain plug is made of durable material, easy to flow and strong..
Check Stock

ZRM&E Plastic Cooler Drain Plug Leak-Proof Accessories for RTIC Coolers and YETI Coolers, Red

  • The plug used in the lower part of the RTIC of the drain cooler has improved the radiator designed for the drain cooler. These can be used as replacements for drain plugs, all hard coolers of RTIC..
  • Replacement drain plug, suitable for RTIC cooler, improved finger knob design makes it easier for fingers to open and close the drain pipe..
  • Easy to flow, the sturdy drain plug allows your refrigerator to drain when it is partially opened..
  • The drain plug adopts a leak-proof design, which perfectly replaces the old or damaged cooler drain plug..
  • The replacement drain plug is made of durable material, easy to flow and strong..
Check Stock

2 Pack Cooler Drain Plug for Yeti Cooler Plug Replacement Accessories for Yeti, Cooler Wheels Compatible with Most Rotomolded Coolers Including Most Major Brands Drain Plugs with Leak-Proof Design

  • 【Compatibility】Drain Plugs for Yeti Are An Ergonomically Improved Twist Drain Plug, Is An Improved Design That Specifically Fits With Cooler Plug with Yeti Line of Roadie, Tundra, and TANK Ice Buckets and RTIC coolers (This is Non-Original Aftermarket Parts).
  • 【Perfect Size】This package contains 2 Pack high visibility cooler drain plugs, and each size is approx. 4.57cm/ 1.8 inch in length and approx. 2.79 cm/ 1.1 inch in width, An Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining..
  • 【Easy to Use】Screws right in, seals tight without any leaking issues. Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open,Tighten the leak-proof drain plug is good for prevent the cold loss from your Coolers..
  • 【High Quality Material】Cooler Plug Replacement for Yeti with Premium Quality, The drain plug is made of 2 parts, the collar is made of silicone, and the plug is made of quality ABS plastic, which is very strong and leak-proof, and can be applied for a long time..
Check Stock

ZAWAYINE 12V Universal A/C Air Conditioning Evaporator and Heater Kit, Car Under Dash Heat Cooler Assembly Kit with 3 Speed Electrical Thermostat Max Air Volume 880FT/min for Car, Bus, Truck and More

  • High Quality and Durable: This air conditioner evaporator is made of high quality ABS, which is corrosion and wear resistant for long term use. Used to add air conditioning system to vehicles that are not equipped with air conditioning from the factory, perfect for cars, trucks, vintage cars, RVs, etc..
  • 3 Speed Air Flow: This evaporator can be adjusted to three wind speeds, you can adjust it according to your needs, very easy to use. (We highly recommend a professional installation. If you have any questions, please contact us).
  • Note: This is not a stand-alone unit. It requires a compressor and a condenser to work properly.
  • please allow for slight color differences due to shooting light and 1-3 cm error due to manual measurement and make sure you don....
Check Stock

AIEVE Drain Plug Hose Connection for YETI Cooler, Cooler Drain Plug Replacement for YETI, Cooler Plug Replacement for YETI Chest, Cooler Accessories for YETI Tundra Cooler, Roadie Cooler, Tank Cooler

  • AIEVE cooler drain plugs for yeti cooloer with leak-proof design replace your old or broken cooler drain plugs perfectly, use with most standard hoses to drain your YETI coolers easily, allows you to drain your YETI Cooler with a garden hose without removing it.
  • This cooler drain plug replacement for YETI coolers is easy to open and close to drain your cooler water, durable and provides a secure connection for easy draining, no long need to pull cooler out your truck to drain water, effective and ice melts eventually.
  • Cooler plug replacement for yeti cooler fit most standard hoses to drain the cooler water easily while drain plug is partially open, garden hose drain plug connector for coolers, connect a standard garden hose, and drain all the way down at the end of the driveway, instead of pooling a big old puddle of cold water into your garage.
  • Tighten the replacement cooler plug and keep your YETI Tundra coolers cold, when not in use, simply attach the provided cap as a leak-proof plug and drain your YETI coolers easily without lifting a finger, no need to drag the ice chest to the end of the tailgate to drain and the wat....
Check Stock

[OEM Products] BENEDETTO Auto Service 10 PCS Oil Drain Plug gaskets/Crush washers Replacement for Toyota Drain Plug Washer Replaces# 90430-12031 Aluminum (QTY10)

  • Toyota oil drain plug gasket Part Number: 90430-12031, 9043012031, , 90430-A0006, 90430-C0005, for Dorman 095-156, 095-156CD, and 65394.
  • 90430-12031, oil drain plug gasket: Fits Lexus Scion Toyota CT200h ES350 Prius Tundra Sienna Corolla 4Runner Highlander Camry Tacoma RAV4 Scion tC xB xD Oil Drain Plug Washers..
  • Specification: Thickness: 0.07inch, Inside diameter: 0.48 inch, Outside diameter: 0.82 inch.
  • Easy to install and High-Quality Material and Performance Aluminum toyota oil drain plug gasket.
  • 90430-12031 Oil Drain Plug Gaskets is a ring-shaped part that keep the drain plug tight and free from leaks and helps to seal the drain plug and oil pan surfaces. When it's time to change your Toyota's oil and oil filter, it may also be time to replace the drain plug gasket. Prevent oil leaks with "crush" gaskets.
  • 10 Year Warranty: If these toyota oil drain plug gaskets damaged, please feel free to contact us for reship or refund..
Check Stock