Best Ethernet To Serial Interface Module

ACEIRMC 3pcs W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5

Power supply mode:3.3V external power supply, current should be more than 200mA.
USR-ES1 is the Ethernet module of a SPI interface, interface is TTL level of 3.3V, power supply voltage of +3.3V, please ensure that the current is not less than 200mA, voltage is continuous and stable +3.3V..
W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5.
Control interface:The TTL level, 3.3V SPI interface.

Dual Serial Device Server: Cpu: Cortex-M4 120Mhz, Serial RS485 & RS232 to Ethernet Server, 2 Serial Ports: 1 Port is RS232, 1 Port is RS485, 1 RJ45 Ethernet Port. Support RS232 & RS485 Working at The Same Time..
Data Link Protocol: Ip£¬Tcp£¬Udp£¬Dhcp£¬Dns£¬Http£¬Arp£¬Icmp£¬Web Socket£¬Httpd Client..
Speed: 10 / 100 Mbps, Mdi / Mdix Cross Direct Automatic Switching, Baud Rate: Rs-232£º600Bps ~ 230. 4Kbps£¬Rs-485£º600Bps ~ 1Mbps.
1.5Kv Electromagnetic Isolation, Shell Isolation Protection.
Configure Via Web Browser or Virtual Com Software Interface.
Working Temperature: -40 ~ 85¡ãC, Power Consumption: 003c 1W..
What's in The Box: 1 x Dual Serial Device Server, 1 x 5V 1A Power Supply, 1 x Female to Female Serial Cable..

How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use..
★Note: This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. When using it, please make....
GPSBaud needs to be set to 9600 instead of 4800.
PPS pin is not needed unless using the GPS to drive a hardware high precision clock.
With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....

This is a new 2.8 inch serial SPI color display module with touch function.
Designed with one socket for memory card.
With PCB plate (including power supply IC, Memory Card), compatible with 5110 interface.
5V compatible, use with 3.3V or 5V logic.

The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
CAN industrial automation control system.
The serial communication device is connected to CAN-bus.

Genuine Dell MotherBoard For Dell Optiplex 755 SMT Small Mini Tower.
CHIPSET:Intel Q35 Express w/ ICH9D0 | SUPPORTED PROCESSOR: Intel Pentium, Celeron, Core 2 Duo, Core 2 Quad, Socket 775.
MEMORY: 4 DIMM slots supporting up to: 8 GB of RAM for 64-bit OS, or 4 GB of RAM for 32-bit OS | VIDEO: Integrated Graphics Media Accelerator 3000 | AUDIO: Integrated Audio Sound Controller, ADI 1984 High Definition Audio.
PERIPHERAL INTERFACES: (8) 2.0 USB (front and back), (1) parallel printer port, (1) serial ports, 4 - Serial ATA (SATA) Interface Ports, 1 - e-Serial ATA (eSATA) Interface Port, 1- 10/100/1000 Ethernet Port.
EXPANSION CAPABILITY:1 PCI-E X16 slot, supports x16, x8, x4, and x1 modes/cards, 1 PCI-E x1 slot, 2 PCI 32Bit / 33MHz slots, 1 FDD connector, Dell Part Numbers : GM819, JR271, Y255C, GM816.

The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.

ACCESS YOUR SERIAL DEVICES REMOTELY: Use this RS232 to Ethernet IP converter to connect to, configure and remotely manage an RS232 serial device over an IP network.
DURABLE CONSTRUCTION: Built with a rugged aluminum housing, this serial to IP Ethernet device server delivers a reliable performance that can be used in almost any environment.
FLEXIBLE INSTALLATION: This serial to IP converter can be mounted to a surface or on a DIN rail with the built-in mounting bracket and included DIN rail clips.
Access a serial device from anywhere with an IP-based connection.
Mount on DIN-rails or on a wall with the attached mounting brackets.
Suitable for hash environments with a rugged, aluminum enclosure.
Configure via web browser or Virtual Com software interface.
Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP.