Best Epcos Motor Start X 1800b

49CC 2 Stroke Engine Motor Racing Complete Engine Motor Pull Start Motorized Bike Engine Kit for Mini Pocket Bike Scooter Dirt Bikes ATV Quad Motorized Bicycle (Minimoto Engine(B))

  • 【MAIN PARAMETERS 1】Cylinder Numbers: Single cylinder, Displacement: 49CC, Stroke: 2-stroke, Bore: 44mm/1.7'', Chain: 25h, Gas-oil Mix Rate: 25:1, Gear Box Reduction Rate: 3.1:1, Cooling: Air Forced Cooling, Spark Plug Size: L7T L7TC..
  • 【MAIN PARAMETERS 2】Start Way: Recoil pull start, new style recoil, easy to pull start.
  • Recoil Starter Material: New style easy pull starter.
  • Application: for most air cooled mini dirt bikes.
  • Package size: 34cm x 25cm x 15cm (13'' x 10'' x 6'').
  • 【COMPLETE ENGINE MOTOR】This Engine is complete with high performance cylinder head, plug, powder coated metal pull start, air filter and 14mm/0.55'' carburettor, balanced crank, balanced flywheel, ported piston windows, up-rated CVT transmission unit..
  • 【HIGH EFFICIENCY ENGINE】49CC mini motor air cooled racing engine capable of achieving 40mph dependant on user weight and terrain. 【MAIN PARAMETERS 1】Cylinder Numbers: Single cylinder,.
  • 【CUSTOMER HAPPINESS IS OUR PRIORITY】: We stand by and believe in our products 100%! If you have any problems, contact us and we will find a solution together!.
Check Stock

LEM Products W780A Stainless Steel Big Bite Electric #12-Meat Grinder (.75-HP)

  • Induction motor with a start and run capacitor (9 amps).
  • Permanently lubricated, 110V motor (60HZ).
  • Dimensions (fully assembled): 9" W x 19.5" L x 16" H.
  • Dimensions (motor only): 7.5" W x 15.5" L x 13" H.
  • Hole in head where pan is inserted is 2”.
  • Stainless steel head, auger and meat pan.
  • Includes: 1 meat stomper, 1 stainless steel knife, 1 stainless steel stuffing plate, 2 stainless steel plates (Coarse, Fine), 3 stuffing tubes.
Check Stock

LEM Products W782A Stainless Steel Big Bite Electric #32-Meat Grinder (1.5-HP)

  • Induction motor with a start and run capacitor (13 amps).
  • Permanently lubricated, 110V motor (60HZ).
  • Dimensions (fully assembled): 12" W x 24" L x 19" H.
  • Dimensions (motor only): 9.25" W x 24.5" L x 14.5" H.
  • Hole in head where pan is inserted is 2-1/4”.
  • Stainless steel head, auger and meat pan.
  • Includes: 1 meat stomper, 1 stainless steel knife, 1 stainless steel stuffing plate, 2 stainless steel plates (Coarse, Fine), 3 stuffing tubes.
Check Stock

CHA EMCOMM III PORTABLE

  • ...AT-5555N AT-588UV AT-6666 AT-D578UV AT-788UV.
  • Compatible with Marine VHF Two-Way Radio: Uniden UM380 UM380BK UM385 UM385BK UM415 UM415BK UM435 UM435BK.
  • Cobra MRF45D MRF57B MRF57W MRF77B MRF77W.
  • Standard Horizon Eclipse Series GX1300 GX1400 GX1400GW GX1400GB GX1600 GX1600B GX1800 GX1800GB GX1800GW GX1800B GX1850 GX1850B GX1850GW GX2000B GX6000.
Check Stock

TRUEGARD High Mileage 5W-30 Motor Oil 55-Gallon Drum

  • The Lubro-Moly Synthoil High Tech 5W-40 Motor Oil is a fully synthetic and energy conserving motor oil for the latest engine concepts (both gas and diesel), such as multi-valve arrangements, variable cam and timing configurations, turbocharging, supercharging, intercooling, etc..
  • The Lubro-Moly Synthoil High Tech 5W-40 Motor Oil saves fuel and provides instant lubrication after a cold start..
  • Good for extended oil change intervals and the highest demands.
  • Package Dimensions: 10.312 L x 31.496 H x 24.892 W (centimeters).
Check Stock

Makita GD0800C 1/4\ SJS™ Die Grinder, Teal

  • Powerful 6. 6 AMP motor delivers 7, 000-28, 000 RPM for faster material removal.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load.
  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
  • Electronic current limiter helps protect the motor from overload.
  • Directional air-flow vents channel the tool's air output away from the user's face.
  • Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life.
  • Zig-zag varnish protects the armature coil from dust and debris for longer motor life.
Check Stock

LDEXIN 5pcs 1/4 HP AC220V-50/60Hz Round Shell Fridge Component Overload Thermal Protector Relay Starter for Refrigerator

  • ✨【Overheat Guard】This starter is an overload thermal protector for 1/4HP refrigerator.Can replace the old damaged one starter..
  • ✨【Easily Use】Is easy to install, low profile and light weight, highly reliable performanc.Idea for compressor of air-condition or other electric protection appliance..
  • ✨【Motor Protector】Designed to prevent dangerous overheating that can cause motor failure.Ideal spare parts for refrigerator..
  • ✨【Application】The thermal protection is present to turn the motor off when excessive heat is generated within the motor circuitry, halting the temperature climb before it can burn up the motor..
  • ✨【Note】This overheating generally occurs when the motor is overloaded, when a bearing seizes up, when something locks the motor shaft and prevents it from turning, or when the motor simply fails to start properly. A failure to start may be caused by faulty start windings in the motor..
Check Stock

Makita GA9060RX3 7\ Concrete Surface Planer with Dust Extraction Shroud

  • Dust extraction shroud is designed to capture dust during concrete surfacing applications.
  • Powerful 15.0 AMP motor delivers 6,600 RPM for optimum durability and performance.
  • Soft Start suppresses start-up reaction for smooth start-ups and longer gear life.
  • Anti-restart protection is designed to prevent motor start up in the on-power switch position after a power disruption.
  • Power light indicates switch failure, cord damage or worn-out motor brushes.
Check Stock

[Gulfcoast Robotics] HEX EPCOS Thermistor Upgrade for Creality Ender 3 Ender 5 CR10 3D Printers 1 Meter Extension Cable

  • EPCOS Thermistors are the ideal choice for the official Creality firmware. Provides more accurate temperature readings than traditional 100K NTC3950....
  • Creality 1M extension cable includes a 2-pin JST-XH connector that mates perfectly with the board..
  • Fiberglass insulated leads and brass hex stud provide safe usage at high temperatures up to 300° Celsius..
  • M3x0.5 HEX stud threads in to the heater block for quick, secure installation..
  • Silicone insulation ring shields the brass stud from external airflow (e.g. ceiling fans) for stable temperature readings..
Check Stock