Best Engine Oil Sender

MOTOR METER RACING EVO Series Digital 6 Gauge Set Includes GPS Sensor mounting kit

  • Specification Speedometer & Tachometer: Standard 3-3/8" (85mm) dial and 3-3/4" (95mm) opening. EVO Gauge Set requires any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Red, Blue, White & Green to be select as displaying light color, brightness adjustment.
  • 4 types of dimmer setting where the color can be shift according to users' needs in different conditions..
  • Specification Water Temp, Volt, Oil Pressure & Fuel Gauge: Standard 2"(52mm) dial 2-1/16"(52.4mm) opening. Red & Blue to be select as displaying light color, brightness adjustment..
  • Features: EVO 6 Gauge Set applying the latest LCD movement technology with the display of precision. It is designed for in-dash usage, while suitable on-dash mounting cups available to be ordered — flat clear acrylic lens with plastic housing, designed to be installed with ease..
  • Packaged: Speedometer GPS sensor and convector, fuel level sender, water temp sensor (Thread size: 1/8 NPT), oil pressure sensor (Thread size: 1/8 NPT), 3-3/8" mounting stand (2 pcs), wiring harness, installation manual..
Check Stock

Zerodis CO2 Refilling Adapter, Adjustable CO2 Cylinder Refill Adapter Valve CO2 Tanks Bottle Connector Accessories 3000psi Pressure Gauge

  • Works for oil,fuel,diesel,gas,water,air pressure. Can be used in oil tank,gas tank,diesel tank etc..
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Pressure and Pull Pressure Sensor..
  • Input 5V DC,Output: 0.5V – 4.5V linear voltage output.
  • Package Include: 1 X Pressure Transducer.
Check Stock

FASTROHY 0.5-4.5V 60 Psi Universal Pressure Transducer Sender/Sensor Solenoid for Oil Fuel Diesel Gas Air Water,Gauge Pressure 1/8\NPT Thread Stainless Steel

  • Works for oil,fuel,diesel,gas,water,air pressure.
  • Can be used in oil tank,gas tank,diesel tank etc.
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Load Cell Sensor. CMC for Pressure and Pull Pressure Sensor..
  • Package Includes: 1PC x Pressure transducer (With cable).
Check Stock

K-Swap Coolant Temperature Sender Sensor Adapter - Compatible with Honda Civic - Compatible with Acura Integra - K20 K24 Engine Swap

  • K-Swap Coolant Temperature sender Sensor Adapter.
  • Designed for old chassis Hondas with K20, K24 engine swap.
  • You need this adapter to make sure that your cluster still keeps you informed of the Temperature of the engine.
  • This adapter replaces the OEM idle air assist vale (not used on K-Swaps) leaving you with the perfect spot to thread your sensor into..
  • For K20, K24 Engine Swap - Compatible with Acura integra - Compatible with Honda civic, Honda Crv, Accord, Crx, MR2.
Check Stock

AUTEX 150 Psi Pressure Transducer/Sender/Sensor 150/200 Psi Stainless Steel 1/8”-27 NPT Pressure Transducer Sensor Compatible With Oil Fuel Air Water

  • 100% brand new Pressure transducer/sender/sensor 150 psi stainless steel for oil,fuel,air,water.
  • 150 psi Pressure transducer/sender/sensor/Transmitter....
  • Output: 0.5V–4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 150 psi outputs 4.5V.
  • Pressure Medium:The gas and liquid which is compatible with 316L stainless steel / Electromagnetism Compatibility:EN50081-1.
  • Package include: 1 pcs x150 psi pressure transducer.
Check Stock

Zerostart 3400072 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 2¼\ x 4\ | 120 Volts | 125 Watts

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

AODITECK 240-33 ohms 7'(180mm) Fuel Sending Unit Marine for Boat Car Fuel Tank Sender Fuel Water Level Sensor Marine Gas Water Tank Sensor Fuel Gauge Sending Unit Truck Marine Gas Water Tank Sender

  • Direct replacement for swingarm sender, wema sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank..
  • "Easy to install, easy hookup!" The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions.
  • The wiring instructions are straight forward and easy to follow. Takes about 15 minutes to install total, getting the fuel gage working again..
  • SAE 5 hole mounting pattern, heavy duty 316 stainless steel and rugged construction. Signal Output: 240 ohms-33 ohms. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto..
  • Warranty Period: 1 year. We have local support in the USA,so we will generally not be asking customer to return parts to China if they have an issue. If you have special requirements, please contact us and we can customize for you..
  • Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal ..
Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock