Best Engine Head Stud Kit

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

• Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
• You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
• Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
• Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
• The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
• We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.

ARP 2304201 Head Stud for Chevy Duramax 6.6L

EZ STUD OUT Stud Removal Tool Universal kit

• The Universal kit can be used on any flat surface where a broken stud has to be removed.
• EZ Stud Out allows you to quickly replace broken studs with no drilling or tapping.
• Universal Kit comes with 3 plates, 25 EZ Stud Out Thin Nuts, carbide burr and a rugged and durable plastic case.
• No need to be a highly skilled technician, good for DIY.
• Even removes broken studs that are recessed in cylinder head.

12-Point Cylinder Gasket Head Stud Bolt Kit Compatible with 1997-2003 Chevy LS1 LQ9 LS6 4.8L 5.3L 5.7L 6.0L Engines 279.1023

• 【Compatible with】1997-2003 Chevrolet LS LQ9 LS1 LS6 4.8L 5.3L 5.7L 6.0L Engines, 1997-2003 C5 Corvette, 1998-2002 Camaro/Firebird F-Body, 1999-2003 Silverado/Sierra GM Trucks (4.8L, 5.3L, 6.0L)..
• 【Package Includes】16*long M11 head stud.
• 【Quality Standar】Each cylinder head screw set is strictly manufactured to ensure zero defects-hardened and parallel ground washers are included with zero failures to ensure uniform load distribution and accurate torque readings..
• 【Premium Built】Cylinder Head Stud Kit is made of 8740 high tensile strength chromoly steel strict quality testing. With professional processing technology the surface is treated with black oxide finish and the old or damaged cylinder head bolt kits can be directly replaced..
• 【Lifetime Warranty】The Cylinder Gasket Head Stud Bolt from KET comes complete with a lifetime warranty.If there is any problem with the product,please contact us and we'll solve it for you immediately..

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

• No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
• Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
• Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
• Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
• We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.

YSTOOL 8PCS Engine Compression Tester Kit Automotive 300PSI Cylinder Pressure Test Gauge Tool Set for Auto Car Truck Motorcycle Gasoline Petrol Gas Engine Diagnostic with Red Case

• This cylinder compression tester kit is a professional tool to test the compression in gasoline engine. The readings will help to diagnosis if there are valve sticking, carbon build-up, piston or cylinder head modified, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, etc. Please note, a variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.
• There are 4 sizes of brass adapters and 2PCS universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
• The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most d....

Ford Racing M6675A460 Oil Pan Kit Includes Rear Sump 6 Quart

• Fits 1979 - 1995 Mustang and Fox chassis.
• Kit includes rear sump oil pan, dipstick, dipstick tube, pickup, and main cap stud.

Fuel Test Kit with 1 Reusable Tester for E85, Gasoline, Race Gas, Ethanol, Ethanol-Free Fuel Test

• 8PCS Professional Engine Cylinder Compression Tester Kit Automotive Tool Gauge,Cylinder Compression Gas Engine pressure test kit.
• Checking Compression On Petrol Engine Quickly And Accurately，The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston..
• Completed Kit Comes With Adapters For Most Applications，There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the engine compression test kit,.
• Pressure release button on the side of the tester helps with easy pressure release, 3" gauge with dual color scale..
• The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression..

Mini V8 Engine Model Kit That Works Run, STEM Hobby Toy Building Kit for Kids & Adults with DIY Guide & Realistic Parts, for AX90104, SCX10, Capra, VS4-10 Pro/Ultra Model Car

• Mini Engine Model Toys: Kids DIY Toy V8 Combustion Engine Models Kit That Works! This mini replica of a classic four-cycle 8-cylinder internal combustion gasoline car engine teaches young minds all about the wonderful world of mechanical engineering in one immersive set that makes the perfect hobbies gift set for adults or kids..
• Simulation Metal Engine: V8 internal combustion engine structural principle design, drive structure of belt wheel winding, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, spiral near and far valve intake manifold, oil pan structure, and power supply drive board plug interface..
• Model That Works: Deliver the action of a classic car engine thanks to the powerful pistons and interactive cables! Simply plug the cables into the battery pack distributor and watch the engine fans turn around with real engine sounds..
• Application: The simulated V8 engine is suitable for a variety of RC models such as AX90104, SCX10, Capra, and VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powe....