Best Energy Meter Calibrator

CEM BX-350 Portable Infrared Temperature Calibrators 122 to 662℉,50-350℃,Resolution 0.1℃/℉

  • The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
  • External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
  • The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
  • The calibrations can be done over a range of 50℃ to 350℃..
  • Temperature display and stability resolution is 0.1 degree..
Check Stock

CEM BX-500 Portable IR Dry-Well Infrared Temperature Calibrators 122 to 932℉（50-500℃

  • The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
  • External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
  • The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
  • The calibrations can be done over a range of 50℃ to 500℃..
  • Temperature display and stability resolution is 0.1 degree..
Check Stock

Negative Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: ACE PSI-PP1 (Static Pressure Pump Only)

  • Calibrator: Static Pressure Pump Calibrator (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
  • | Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
  • Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
  • Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
  • Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Filter Monitoring, Room Pressure Monitoring, Laboratory..
Check Stock

Fluke 725 Multifunction Process Calibrator

  • The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.
  • Small, streamlined shape, rugged, reliable design stands up to field use.
  • Easy to read measure/source screen lets you view input and output simultaneously.
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters.
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters.
Check Stock

Plug-in Kilowatt Electricity Usage Monitor Electrical Power Consumption Watt Meter Tester

  • 【Electricity Usage Monitor, Extension Cord】you can virtually monitor standby or working power dissipation of all your electronics. Monitor which appliances are the high cost of energy. save energy, money, Reduce CO₂emissions, environmental friendly,etc.electrical usage monitor.
  • 【Upgrade Blue Backlit LCD Display】The digital large backlit LCD display screen is 180° full wide view clear visible, make you easy to read and record the data, especially in the darkness.power consumption meter.
  • 【Overload Protection】 When the whole power exceeds the rated power 1650W of monitor, LCD will display.watt plug meter.
  • 【Various Parameters Measurement】CO₂ Emissions(CO₂/KG), Power(W), Energy (KWh), Voltage/Hertz, Amps/Hertz, Power Factor, Minimum power and Maximum power, 8 modes for your choice.kilowatt meter.
  • 【Data Hold Function】Electricity Usage Monitor will save the last datas when you remove the appliance from power meter or remove the power meter from the socket.
  • If you're not satisfied with it, please feel free to contact, We take full responsibility for product quality.plug in amp meter.
Check Stock

BALDR U.S. Electricity Usage Monitor for Home - Kilowatt Meter Sockets - Watt Meter that Plugs into Appliances to Measure Energy Usage - Home Energy Monitor with Easy to Read Display - Power Monitor

  • SAVE ON YOUR ENERGY BILL: Simply plug our electrical usage monitor into your electric appliances to discover their true efficiency. Our home power monitor can measure voltage, wattage, current strength, CO2 usage, electricity costs in kilowatts per hour, and more, all in real-time. Now you?ll know if it?s time to replace that old dryer with a new energy-efficient one..
  • FUNCTIONAL PROTECTION FROM POWER OVERLOADS: Our energy usage meter features overload protection which will notify you if a unit is drawing more electricity than a circuit can safely handle. Text reading "overload" will blink on the screen of our energy consumption meter to warn you that the appliance needs to be immediately unplugged in order to prevent overheating. Protect your valuable appliance with our energy monitor outlet!.
  • EASY TO READ DISPLAY: Our electric meter has an extra large LCD screen with a clear digit display so that you can read the measurement from close or afar alike. Our digital wattage meter continues energy monitoring day and night so that you can make smart and informed decisions that can impact your energy usage..
  • BUILT-IN BATTERY BACKUP: Our energy meter comes with a built-in battery backup feature that will save your electricity usage readings, cost reading....
Check Stock

KETOTEK Power Meter Single Phase Energy Meter Electricity Usage Monitor AC 80-300V 100A Digital Voltmeter Ammeter Din Rail Voltage Volt Amp Watt Kwh Factor Current Power Consumption Counter

  • 【Multiple data display】This power meter is able to display measured AC volt, amp, power factor, active power, electric energy and accumulation time..
  • 【Technical indicators】Voltage: AC 80V-300V, Current: AC 0.0-100A, Active power: 0.0-30000W, Electric energy: 0-99999kwh, Frequency: 45.0Hz–65.0Hz, Power factor: 1.000-0.000, Electric energy of cumulative time: 0.00-999.59h..
  • 【Safe and high precision】This home electricity usage monitor features high quality ABS flame resistant material and high percision chip, making it safe to use. Accuracy is 1％±2 digits, measuring Speed is 2 times/s..
  • 【Multi Functions】1.Data reset for multiple measurement needs. When the watt meter displays electrical energy, press the SAM CK button for five seconds, the meter will be reseted. 2.The value of electric energy and electric energy of cumulative time will be automatically saved when power off, and when the measurement power is reconnected,the meter will go on cumulating data..
  • 【Multi-field application】This din rail voltmeter ammeter is built in transformer which can meet the load maximum current 100A. It can be used indoor or outdoor in school, market, home, industry, laboratory and other fields. *Attention: The meter can only use to measure 50/60 HZ A....
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

APIELE 16A DC Circuit Breaker 500V 2P Miniature Circuit Breaker Thermal-Magnetic Trip Low Voltage Protector for Solar PV DIN Rail Mount (DC-16A)

  • Auto-recovery Function: When the single-phase circuit has an undervoltage, when the current is faulty, the line is cut off, and when it returns to normal, it automatically recovers.
  • Clear Display: This Electric Meter Single Phase Energy KWh Meter has voltage, current and power display to offer convenient use.
  • Provides Reliable Performance: This Air Circuit Breaker is designed with anti-thunder protection, it has stable performance.
  • Good Durability: This Single Phase Energy KWh Meter is made of high quality material, durable and long service life.
  • Multi-function Offers Safety Performance: This Single Phase Energy Meter has multi-functions, which is featured with overvoltage protection, undervoltage protection and current limiting protection.
Check Stock