Best Ender Direct Drive Kit

Zeberoxyz Upgrade Dual Gear Version Direct Drive Extruder Support Plate Easy Print Flexible Filament for Creality Ender 3 V2 Ender 3 Pro,Ender-3,CR-10,CR-10S 3D Printer Dual Gear Support Plate

Material: Plate is made of high quality cold rolled sheet material,long service life, fine workmanship.
Filament: More material options,easy to print TPU flexible filament.
Advantages: A direct drive kit with dual gear extruder improves extrusion and retraction.
Widely Used: for Creality Ender 3/ Ender 3 V2/ Ender-3 PRO/ CR10/ CR10S 3D Printers, Only Suitable for Dual Gear Version Pulley Extruder.
Package Content: 1pcs Dual Gear direct extruder support plate, 1pcs Length 60cm motor extension cable (one end is female and the other is male), 2pcs....

Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..

Check Stock

Creality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables

Upgraded Kit - Direct extruder kit for Ender 3, Ender 3S, Ender 3 Pro. Support all 1.75mm diameter filament in the market, especially for flexible filament..
Smooth Feed-in - The direct extrusion structure lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament..
Greater Compatibility - Compared with bowden extruder system, more fit for printing with PLA, TPU and other flexible filaments..
Strong & Sturdy - This direct extruder kit is all metal structure, durable and wear resistant..
Easy Assemble - Longer connecting cable, tools, accessories and diagram instruction, easy to assemble..

Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..

Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with High-Temp Nozzle, All Metal Direct Drive Extruder, Flexible PEI Bed, CR Touch Auto Leveling, Upgraded Ender 3 3D Printers for Home Use, 220×220×270mm

Auto-leveling with the included CR Touch Kit and 4.3” Touch screen as well as LED lights take the Ender 3 S1 Pro's ease of use to a new level, making it a great 3d printer for people..
Better Performance: The new “Sprite Pro” Direct drive all metal dual gear extruder is capable of temperatures up to 300°C with the equipped brass nozzle. The Creality 3D Ender 3 S1 Pro ensures quality extrusion and printing precision with fewer jams and is capable of a wider range of materials like TPU and Nylon and Carbon Fiber composites..
Smooth Finish: Upgrading from the standard glass bed to a new spring steel bed, the Ender-3 S1 Pro is capable of excellent adhesion and smooth surface finish out of the box. These new dual Z-axis lead screws will deliver consistently great prints..
Even more upgrades: 32-bit silent board, print resume support, and filament run-out sensor are all included for a better printing experience. printing experience..

Check Stock

Creality Upgrade Ender 3 Extruder Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer

Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender....
Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive..
Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking..
Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their....
Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install..

Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
an Integrated structure is convenient for wiring and replacing..
3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.

Check Stock

Redrex Dual Gear Ender 3 Extruder with Nema 17 Stepper Motor Compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 7,CR6 SE,CR10,Vyper 3D Printer

【Double Gear Extrusion Mechanism】The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
【Application】This all metal dual drive extruder with motor kit is compatible with Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender....
【High Torque Motor】The Nema 17 stepper motor provides 1A 40Ncm/57g.cm^2 in holding torque which helps to improve the motor's stability..
【Kindly Reminder】:Please calibrate the E-steps from 100 to 139.
Please lubricate the gears before first use.

Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

...h no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years, Great for use with any Creality 3D printer..

Check Stock