Best End Cap For Tubing

SBDs (Pack of 8) 4-3/8\ (110 MM) Round Plastic Tubing Plug-End Cap 4-7 Ga Heavy Duty Impact Resistant -Rare Size.

  • SBDs (Pack of 8) 4-3/8" (110 MM) Round Plastic Tubing Plug-End Cap 4-7 Ga Heavy Duty Impact Resistant -Rare Size..
  • Material: Low-Density Polyethylene. Service Temperature: -94 - 175° F (-70 - 79° C). Durable construction and excellent gliding edges. Not subject to rust or corrosion. Shockproof, wearproof and UV resistant..
  • End Cap for Pipe Post - Rare Size. These plugs are sized for different gauges, their shoulders fit flush with tubing sides and keep dirt and moisture out of sensitive areas. Protect against sharp tube edges Provide clean finish on completed products. Flexible ridges snugly hold these plugs in place and allow them to fit a range of hole diameters..
  • Please measure your Tube Inside and Outside Dimensions and order the correct gauge Plugs..
Check Stock

uxcell Standard Plastic Square Aluminum Extrusion End Cap Black 40x40mm 5pcs

  • Package Content: 5pcs x Aluminum Profile End Cap, for 4040 EU Standard Aluminum Profile.
  • Material and feature: tubing post end caps are made of ABS material, featuring durable construction and nice gliding edges, not subject to rust or corrosion.
  • The cap made of plastic, No rust, better protection for the aluminum bar end, widely used in the climbing platform, fish tank rack, storage rack, shade house, trolley, and so on.
  • Simply press in by hand then pin into the center bore with a small hammer or plastic mallet.
Check Stock

uxcell 50pcs Rubber End Caps 5mm ID Vinyl Round Tube Bolt Cap Cover Screw Thread Protectors Black

  • 【5mm INNER DIA】 Round end cap cover fits 5mm dia round tube or screw or pipe.
  • 【GOOD PROTECTOR】Our flexible end caps prevent scuffs on kitchen or wood floor,for metal chair tips, furniture, chair feet, table legs or tips,....
  • 【FLEXIBLE VINYL MATERIAL】 Thread protector cover is made of vinyl rubber material, flexible and insulated.
  • 【SIZE SELECTION】Because rubber material is soft and elastic, we recommend choosing rubber end cap that is slightly smaller than the outer diameter....
  • 【WIDELY APPLICATION】 Perfect for covering screws or other threaded parts, round tubing, furniture feet and so on.
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

Vent Systems 4" Metal Tee Cap. Galvanized Steel End Cap. Dryer Vent Cover. Dryer Duct End Cap. 4In Steel End Cap. Steel Plug 4Inch. Round Metal Duct Fitting. Reusable. 100mm

  • The cap is used at the end of tubing as a cover to fit over pipe fittings.
  • Easy to install - push-fit end plug/cap in the duct. fix with clamp, alu-tape or rivets..
  • Durable Material: Made of High Quality Metal and is rust free. Fits perfectly with other Vent Systems HVAC products..
  • Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability..
Check Stock

4 Pcs 50mm (2 Inch) Round Plastic Plug ,Round Tubing Black Plastic Plug，Pipe Tubing End Cap for Round Tube Furniture Finishing Plug

  • The 2" round plastic plugs only fit 50mm (2 inch) outside diamefer round tubing or pipe. (not inside hole diameters ,not inside hole diameters) Designed to fit inside hole diameters from 1.81" to 1.93".with a wall thickness 0.020" - 0.060".（Refer the Size Picture）Select the plug size that matches the outer diameter of the tube, note that the outer diameter of the tube must match. there are certain errors in the size of round pipes and pipe plugs, which is a normal phenomenon, please check the size before buying..
  • Material: 50mm (2 Inch) round tube end cap plug Made of high-quality plastic, durable and wear-resistant. Waterproof and compressive wear proof..
  • Uses:black plastic cap Provides long lasting protection， great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliderschair leg protectors, patio furniture inserts, and much more..
  • The 2 Inch round threaded inner plug can be used as a durable solution for home or outdoor projects, including replacement of fence/door railing covers, trailer frame ends, rod tube rod caps, wrought iron steel decorative plugs or any round opening. Not easy to deform, firmer, not easy to fall off, easy to install..
  • We believe that our round Tubing Post ....
Check Stock

3 Square Tubing Heavy Duty Plastic Plug End Cap Insert 3x3 8-14 Tube Pipe Post 1

  • High quality heavy duty thick wall plastic finishing plug, end cap for 3" steel square tubing..
  • Fits inside tube diameters from 2.65'' to 2.82'' (2 11/16'' to 2 13/16'') Compatible Outside Tube Diameter: 3'' x 3'' Compatible Tubing Wall....
  • Thick heavy wall plastic plugs for square tubing are manufactured to provide a secure fit on multiple tube gauges. These tube plugs are perfect for....
  • If you need more than 1 please change the quantity to the number desired. The more you buy the less each plug will cost..
  • Color: Black Compatible Outside Tube Diameter: 3.000 in Compatible Inside Tube Diameter: 2.65" - 2.82" Compatible Thickness Range: 08-15 gauge....
Check Stock

JAYEE 24P Drip Irrigation Fittings Kit for 1/2\ Tubing (.600 ID), 17mm Parts- 6 Tees, 6 Couplings, 6 Elbows,6 End Cap Plugs- Barded Connectors for Rain Bird Pipe and Sprinkler Systems (24 Pieces Set)

  • Great value: includes 6 Tees, 6 Couplings and 6 Elbows,6 End Cap Plugs, 24 pieces drip irrigation parts in total.
  • These 17mm irrigation fittings work with most of 1/2" Drip irrigation tubing (17mm .560-.600" ID), compatible with many types of Rainbird,Orbit,Dig and Toro half inch tubing.
  • Made with environmentally-friendly and chemical-resistant materials, it is sturdy and will last for a long time.
  • Easy to install without glue, tools, or clamps. Barbed ends grab tubing for a secure leak-proof connection. Tips: Heated end of hose to help it slide on fitting.
  • Ideal for Use with garden greenhouse, flower bed, patio and agricultural watering applications.
Check Stock

SHENGHUISS 2 Pcs 1 inch Bimini Top Cap Eye End Boat Fitting Stainless Steel 316 Fits 1 inch O.D. Round Tubing with L Shape Hex Key

  • Bimini Top Cap Size: Each eye ends measured approx 1.25'' O.D, 1'' I.D, fits for 1'' O.D. round tubing. One screw on each fitting measured M6. Pin: 1/4" bolt holes..
  • 1’’ external eye end has shining polished looking and smooth touch.Perfect replacement for marine hardware and accessories, widely used for boating,bass boat,fishing boat, kayak, canoe, yacht,etc..
  • Bimini Top Cap Cast from marine grade stainless steel 316 .Seawater corrosion resistance. stainless steel 316 bimini top eye end is a perfect choice to replace your plastic, nylon or broken fittings..
  • Outside eye end for bimini top,This product is suitable for 1 inch tube, We use the international standard 1 inch tube for dimensional inspection to ensure that each product can be installed normally.
  • Package Includes:2 pieces of Bimini top cap and 1 piece of L Shape Hex Key.
Check Stock