Best Embedded Development Kit

Yahboom Single Board Computer K210 Developer Kit with AI Vision RISC-V Face Recognition Camera Touch Screen Programmable Development Board (Complete Kit) (K210)

K210 developer kit adopts RISC-V processing architecture, a mini full-featured development board kit designed for machine vision and auditory multi-modal recognition. It can be widely used in smart homes, smart robots, security monitoring and other fields.
Board comes with HD camera, capacitive touch screen, on-board indexing electronic components, such as three-way switches, RGB lights, gyroscopes, speakers, ESF8285-WIFI module, microphone array interface, etc. In addition, all IO ports of the K210 chip are led out through the pin header, which is convenient for users to expand..
Supports 3 development environments of Windows/Linux/Mac OS. When the computer and the K210 development board are connected to the same WiFi, they can communicate with each other, that is, combined with IOT to achieve remote control.
The development board comes with a factory test program, but the demo program needs to be burned in by yourself. Yahboom provides a large number of open source courses and materials, and supports online after-sales technical services..

Check Stock

Oculus Rift Developers Kit Dk2

Oculus Rift Development Kit Dk2 (second development kit version).
Positional Tracking Precise, low-latency positional tracking opens the door to entirely new interactive and gameplay opportunities. Great positional tracking is a key requirement for virtual reality.
with it, the Rift can accurately map all of your real world head movements..
Low Persistence OLED Display DK2 uses a low persistence OLED display to eliminate motion blur and judder, two of the biggest contributors to simulator sickness. Low persistence makes the scene appear visually stable, increasing the potential for presence..

Check Stock

DollaTek SIMCOM SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for R3 Mega with Antenna

Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega.
Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
Note: This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..

Check Stock

AUKUYEE Updated 2.4″ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)

Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..

Check Stock

ALMOCN for Digital Oscilloscope Kit Open-sourced 2.4″ TFT 1MSPS for Digital Oscilloscope DIY Kit Handheld Pocket Sized 13803K, SMD pre-soldered

Digital DIY Oscilloscope Kit uses ARM Cortex-M3 processor (STM32F103C8), 2.4-inch color TFT display screen can be used as ARM test development board. Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Adjustable vertical displacement, and with instructions..
With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable..
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..

Check Stock

Dorhea 10PCS ESP8266 WiFi Development Internet Board NodeMCU LUA 4M Flash Serial Wireless Module CH340 Serial WiFi WLAN Communication Compatible with Ardui no IDE/Micropython

ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime..
ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
It's a IOT unit with all available resources on board, support smart link and smart networking..
Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
Smart hardwares easily, if you want to do some remote control projects, the cheap but useful NodeMCU board can help you. the embedded MCU and wifi functions let us be able to remotely control our hardwares..
DIY a smart car: If together with the motor or servo extension board, one can diy a smart robot, e.g., rc car, tank chassis..

Check Stock

NADAMOO Barcode Scanner Module EP7000, Embedded 1D 2D QR Auto-scan Barcord Reader Support Screen Scan with USB (SDK & Serial Command Available for Development) Fixed Mount to Self-Service Equipment

1.【Superior Decoding Ability】 Equiped with advanced CMOS sensor , Support to read 1D 2D Codes on screen and paper.
Ability to scan blurred, broken, irregular and colorful barcodes.
Scanning performance is more prominent especially for mobile phone screen..
【Small in size】 Extremely small and easy to embedded and fixed into miniature equipment..
【Easy To Use】USB plug and play ,easy to use.
Support Auto-scan, once the barcode presented in front of the the scanning window, the scanner will instantly wake up to read the barcode..
【Wide-range in application】Applayed to road gate, self-service machine, ticket machine, intelligent express cabinet, intelligent bus ,etc..
【Support custom development】Multiple interface to option(USB, serial（TTL,RS232,RS485）, weigand).
provide SDK & Serial Command Available for Development.
Support to resize hardware. Please contact us for details..

Check Stock

Ingcool Raspberry Pi Pico Microcontroller Board with Pre-soldered Header Low-Cost, High-Performance,Based on RP2040 Chip, Dual-core Arm Cortex M0+ Processor,Flexible Clock Running up to 133 MHz

Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces..
Raspberry Pi Pico Board incorporates Raspberry Pi's own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins..
For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available..
There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly..
This is a Raspberry Pi Pico with Pre-soldered Header,it is easier to connect with another items..

Check Stock

Yahboom Jetson Nano/TX2-NX/Xavier NX/Raspberry Pi ROS Robot Lidar Mapping Navigation Depth Image 3D Analysis Mecanum Wheel Python Programming Learn Explore Robotic Kit (Pi Superior Ver-Without Pi)

ROS robotic learning kit for multiple versions: Yahboom provides 4 development board versions of ROSMASRER X3, you can freely choose Jetson Xavier NX, Jetson TX2-NX, Jetson Nano or Raspberry Pi 4B, based on the different performance issues of these development boards, The smoothness of operation is worth considering, Yahboom recommends the cost-effective Jetson TX2-NX（For detailed and comprehensive introduction, please view the video on the details page: rosmaster x3）.
In-depth exploration of AI algorithms and intelligent robots: ROSMASRER X3 is equipped with a depth camera, lidar, and voice interaction module, which can realize ROS operating system, RTAB 3D mapping navigation, PCL 3D point cloud, SLAM mapping navigation, Machine vision applications, Voice interactive control, Python programming, STM32 development, MediaPipe development, YOLO model training, TensorRT acceleration (Note: Different features depend on the version you choose).
Rich course materials and professional after-sales support team: We provides 103 dual-language video courses, and online technical assistance (China time). The course content includes: ROSMASTER X3 assembly, Linux operating system, ROS and openCV series courses, depth camera and lidar mapping and navigation expla....

Check Stock