Best Electronic Enclosure With Fan

ORICO 5 Bay Hard Drive Enclosure USB 3.0 to SATA 3.5 inch Enclosure Magnetic Tool-Free External HDD SSD Enclosure Storage Case Built-in Fan for Data Backup NAS Expansion Up to 80TB 5x16 - DS500U3

Tool-Free Installation -- The orico 3.5 hdd enclosure designed with magnetic chips on the cover, no screws and tools needed to helps you easily install the hard drives in 3 seconds to saving your time and improving your working efficiency..
Up to 80TB Large Capacity -- The usb hard drive enclosure can support all 3.5 inch SATA hard disks and up to 80TB for every single 16TB storage disk, convenient for enterprise data backup and exchange, also a good tools for the nas expansion..
Super-Speed Transmission -- Multi bay usb 3.0 hard drive enclosure, internal SATA, with 2.5 inch and 3.5 inch SATA HDD / SSD connect USB 3.0 high-speed, the 5 bay 3.5 sata hdd enclosure with the speed transmission reaches up to 5Gbps, about 20% faster than the traditional USB2.0..
Built-in double ball bearing fan -- A built-in 120mm double ball bearing fan which has good performance on high rotating speed and long service life, the 5 bay 3.5inch enclosure with design of large-area honeycomb holes in the rear panel can helps the heat dissipation..
Multi-protection -- Anti-over voltage, over-current, overheat, short-circuit, leakage and other multiple protection designs to ensure the security of data transmission of the usb3 external drive enclosure. Compatible with Supports Windo....

Check Stock

SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\

Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..

Check Stock

Honeywell SV9641M4510 Upgraded Replacement for Furnace Smart Gas Valve

These controls communicate directly with an electronic fan timer (ST9160 Electronic Fan Timer for single stage applications.
ST9162 Electronic Fan Timer for two-stage applications) in typical forced warm air furnace applications.
It can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications.
When controlled directly by a thermostat, these controls do not provide a post purge function, because power to the control is removed when the thermostat call for heat ends.
The Systems are suitable for a wide range of fan-assisted combustion gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters and commercial cooking appliances.

Check Stock

Hydro Breeze Bully Fan - 30 Inch Oscillating Fan - With Portable Outdoor Generator - Outdoor Rated Fan- For Dust control, Outdoor Cooling, Warehouse Cooling - (30\ Oscillating 1500 Psi Pump 10 Nozzles)

...0PSI) Air Throw: Up to 40 Feet - Fan Size: 24'' or 30'' oscillating - 3 Speed - Fan UL507 rated for outdoor and Indoor use -Portable Power Generator -5 hours’ run-time with -1 Gallon Fuel Tank Easy to hook with any Garden Hose or Faucet Built in 5 Micron Filtration - Built in Thermal Safety Switch Outdoor Durable enclosure.
System: Does Not Require Water or Electric Connections - Portable Power Generator - 30 Gallon Water Capacity - 7-10 hours of run time per fill - 30'' High Velocity Oscillating Mist Fan - 10 Nozzle Mist Ring.
- Specially Designed Rolling Cart with All Terrain Tires - Creates large volume of ultrafine mist - UL rated fan for outdoor use - Ultrafine Brass/Stainless Steel Mist Nozzles - 160 Or 1500 PSI HP mist pump in steel enclosure - Stainless Steel Mist Ring on HP System - Lightweight yet durable aluminum frame cart - Corrosion Resistant.
Fan: Rust resistant Powder Coated Finish High Output Performance 3 Speed full chain Industrial Grade Aluminum Blades Fully Adjustable Wall Mount 10ft Pre-wired For Indoor Outdoor use OSHA Approved Grill.
SS Misting Ring: Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI At....

Check Stock

ORICO 4 Bay HDD Raid Enclosure USB External Hard Drive Enclosure Aluminum Magnetic SATA III Disk Storage Case Tool-Free for 2.5/3.5 SSD HDD Support 64TB(4X16TB) for Data Backup NAS Expansion NS400RU3

【4 Bay Raid External Enclosure】-- The 4 bay hdd enclosure can support about 7 kinds of raid modes, you can use the raid function to combine your hard drive or improve your data transmission rate. More raid modes the 4 bay enclosure supports, more convenient in your daily work and life..
【64TB Large Capacity Enclosure】-- The 4 bay sata enclosure can fits 3.5inch and 2.5inch with a bracket SATA SSD and HDD, and each slot can support up to 16TB hard disk, altogether 64TB, good for data storage and nas expansion for enterprises, self-media workers and who works with much data transfer. You can also use it to store large games, work materil, your family memories and backup of camera video..
【Faster Enclosure, 1GB Files for 3 Seconds】-- By adopting high quality chip controller, the drive bay enclosure supports SATA III protocol, the data transfer rate can reach up to 5Gbps(MAX), it can backward compatible with USB2.0/1.0, very stability and easy to carry the huge data interaction of enterprise, reduce the delay..
【Fast Cooling Hard Disk Enclosure】-- The drive bay enclosure is make by 4mm thickness aluminum board body and magnetic enclosure door. There's a cooling fan which the diameter is 92mm built in the usb drive bay enclosure, with a honey....

Check Stock

ORICO 5Bay Hard Drive Enclosure Type-C to SATA 3.5inch Enclosure Magnetic Tool-Free External HDD SSD Enclosure Storage Case Built-in Fan for Data Backup, NAS Expansion Up to 80TB(5x16) - DS500C3

Tool-Free Installation -- The orico 3.5 external enclosure designed with magnetic chips on the cover, no screws and tools needed to helps you easily install the hard drives in 3 seconds to saving your time and improving your working efficiency..
Up to 80TB Large Capacity -- The usb c hard drive enclosure can support all 3.5 inch SATA hard disks and up to 80TB for every single 16TB storage disk, convenient for enterprise data backup and exchange, also a good tools for the nas expansion..
Super-Speed Transmission -- Multi bay external hdd hard drive enclosure, internal SATA, with 2.5 inch and 3.5 inch SATA HDD / SSD connect type-c high-speed and adopted with high performance master control chip, the hard drive external bay with the speed transmission reaches up to 5Gbps, much faster than the traditional USB3.0..
Built-in double ball bearing fan -- A built-in 120mm double ball bearing fan which has good performance on high rotating speed and long service life, the 5 bay hd usbc enclosure with design of large-area honeycomb holes in the rear panel can helps the heat dissipation..

Check Stock

BUD Industries NBF-32026 Plastic ABS NEMA Economy Box with Solid Door, 15-47/64

Weatherproof Plastic Utility Enclosure: Heavy duty general purpose weatherproof utility box with lockable hinged door and extra deep gasketed lid. Offers extreme protection for wiring and electronic devices in harsh environments. Meets NEMA 1, 2, 4, 4X, 12, 13 and IP65, IP66 (EIC 529)..
Applications: Multi Purpose Plastic Utility Box is ideal for indoor and outdoor use including electronic devices, WiFi equipment, LED controllers and iOT sensors. Also great for low voltage and data wiring, cable TV Connections and more..
Durable Industrial Box: molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features an extra deep gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock..
Outdoor Wall Mounting Enclosure: Includes Wall Mounting Hardware, Door Locking Key, Cable Grommets, Zip Ties, Cable Management Straps and Clips. It is RF Transparent for Wireless Devices. Weatherproof and UV Stable..
Specifications: Material: Light gray Polycarbonate + ABS. External Dimensions: 11.9 x 8.9 x 6.6 Inches (302 x 226 x 168 mm). Internal Dimensions: 11.3 x 8.1 x 5.8 Inches (287 x 206 x 147 mm). UL94-V0 Rated..

Check Stock

Infinity Basslink Mini - Powered 6x8 underseat subwoofer - Titanium

6" x 8" Underseat Subwoofer with 100W Amplifier.
Big Bass, Small Space - Infinity BassLink MINI delivers deep bass and takes up minimal space..
Intelligent Electronic Design for Reliable and Extraordinary Performance- The BassLink MINI employs high-pass filters and limiters that deliver....
Die-Casting Aluminum Enclosure Design- The all-die-cast aluminum enclosure design not only minimizes size but also eliminates rattles.
Bass Volume Remote Control- Bass Volume Remote control is included to let you adjust the sound from the driver’s seat..

Check Stock

ORICO 3.5 Hard Drive Enclosure Type-C to SATA III Aluminum 5 Bay Raid External HDD Enclosure Up to 80TB Support RAID 0/1/3/5/10/JBOD/ClONE/Normal-WS500RC3

[80TB Larger Capacity] - WS series drive bay enclosure can support all 3.5inch sata hard disks under less than or equal to 16TB HDD, altogether 80TB large capacity for hard drive expansion, maximize to meet your data storage and backup demand. The 3.5inch drive enclosure also a good choice for nas expansion or the data protector in big enterprise.
[Support RAID Mode] - The 5 bay external hard drive raid enclosure support RAID 0/1/3/5/10/JBOD/ClONE/Normal RAID Mode which can meets different work requirements, and enlarge the ways of working habits. With back cover RAID Set and built-in RAID software management, you can choose the way you convenient. Please operation follow the page description and user manual of the 5 raid bay enclosure.
[Great Heat Dissipation Performance] - Designed with a built-in cooling fan and honeycomb heat dissipation holes on the front and back cover of the 5 bay type c external hard drive enclosure, made by all aluminum alloy enclosure and allows the heat generated in the use to be accelerated by the flowing wind for the great ventilation performance.
[5Gbps Transfer Speed] - The external hard drive enclosure adopts high performance master control scheme, and set with SATA3.0 interface, the data transfer rate of the sata 3 encl....

Check Stock