Best Electrolytic Capacitors

Tnisesm 150Pcs Electrolytic Capacitor 10uF 25V with Aluminum Radial Leads 10UF-25V-4X7

Product Type: 10uF High precision aluminum electrolytic capacitors..
Operating Temperature Range: -40deg/C ~105+deg/C.
Capacitance Tolerance: electrolytic ±20%.
Feature: Unit capacity is large, with radial termination style..
Tinker, DIYer and hobbyists must! Great for repairs and little projects..
Warranty for 1 year. No satisfied, Free reason for return.
Quality problem, please contact us, we will resend your FREE Replacements or make you FULL Refund..

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
129 square inches of sound radiating surface on both the front and back.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-300 watts per channel.
Dimensions: 52.1" high, 9" wide, 16.3" deep.

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.

L-C-R soundbar, Slim design, Binding Posts: Push style.
High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
Frequency Response: 120–23,000 Hz ± 3 dB.
Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".

TREBLE+MIDRANGE+BASS THREE-WAY FREQUENCY: KTV stage professional speaker crossover DIY upgrade tool to improve sound quality.
HIGH-QUALITY MATERIALS: high temperature resistant wire, wire wound ceramic resistor, imported metal film.
HIGH-QUALITY CAPACITORS: low-loss and high-quality, no longer have the problem of electrolytic capacitors.
ENSURE LARGE LOAD CAPACITY: long-term durability, very good sound quality.
OVERCURRENT PROTECTION DESIGN: simple and beautiful lines, reasonable layout of components.

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.

High-frequency transducer: XStat CLS electrostaic transducer.
Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-400 watts per channel.
Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.
Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".