Best Effective For Oil And Gas Tanks

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con....
Check Stock

Synthetic Engine Oil Treatment Additive Universally Compatible Performance Enhancing Reverses Engine Wear and Increases Vehicle Life and Mileage 8 Fl Oz by SHINE ARMOR

  • Optimal Engine Performance. Our performance booster engine treatment reverses wear in bearings by building a carbon coating, providing effective gas treatment for quiet, smooth and efficient performance. A cutting-edge, nanoparticle-based solution that works great for gas and diesel engines alike. It takes the properties of your host oil to the next level while preventing rust, oxidation & reduce friction..
  • Groundbreaking Formula Gear Oil. This revolutionary engine oil additive is eco friendly, made in the USA and contains scientifically backed synthetic oil nanoparticles to boost engine performance..
  • Universally Compatible. Our Engine Performance Booster oil treatment can be used in both gas and diesel engines, and old and new cars. Shine Armor's Oil Additive is compatible with all types of motor oil & engine oil like 5w30, 0w-20, 10w30, 5w20, 15w40 & more..
  • Quality Assured. We know you will be delighted with this ground-breaking engine additive technology. Our oil additive treatment is formulated using the latest technology and backwards-compatible with all vehicles..
Check Stock

19 pcs Gas Can Spout Replacement Set, Gas Can Nozzle 5 Gal ，3 Bendable Tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 Threaded caps ，6 Vent Caps 1 Drill Lid

  • 19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks.
  • HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage.
  • Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible.
  • The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down..
  • We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oi....
Check Stock

KELCH 7J200880 Vintage Arctic Cat Quarter Turn Gas Cap With Gauge 5 3/4\ Long

  • Excellent Quality ( Not Made in China ) New Satin Flat Matte Black Locking Key Lock Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Locking Key Lock Without Slide Cover Satin Flat Matte Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are Satin Flat Matte Black steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson 2 Keys included.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

RV Water Heater Magnesium Anode Rod Kit - 9¼ Inch Long for Mor-Flo + Suburban 6, 10, 12 Gallon Tanks

  • SPECIFICATIONS – Material: magnesium, Length: 9¼”, NPT thread: ¾”. Fits Mor-Flo and Suburban 6, 10, 12 Gallon RUV water heating tanks.
  • STOP TANK CORROSION – Extends the inside life of water heater tanks – electric or on gas – in recreational utility vehicles.
  • MORE EFFECTIVE – Higher electrochemical activity protects the metal parts of your water heater tank even better than aluminum and zinc.
  • NON-TOXIC – Compared to aluminum, commonly used material for anode rods, magnesium has no hazardous potential.
  • QUICK & EASY INSTALLATION – Delivered with all material for DIY replacement in minutes, incl. teflon tape. 1-1/16 Inch Socket required, not included.
Check Stock

WANLIAN Harley Fuel Caps, OEM Compatible with 1996-2015 Harley Davidson Sportster 48 883 XL1200 Scooter Motorcycle Gas Cap Fuel Tank Screw Thread(POP-UP-Bronze)

  • Excellent Quality ( Not Made in China ) New Gloss Black Vented Screw-In Gas Cap Bobber Motorcycle Fuel Tank 1996 to new Sportster Dyna Softail.
  • Gloss Black Harley stock style Screw-In Vented Gas Cap Sportster style gas caps are vented and are steel. An inexpensive cap that does the job and works with stock and aftermarket This vented cap will work on single-cap model gas tanks or for the right-side gas cap Replaces Harley-Davidson OEM 61272-91A 92A.
  • Thanks for Looking at our Quality items Tanks are pressure tested , Be sure fit of tank, mounting hardware, petcocks and gas caps are true prior to painting No stress is applied to the tabs when bolting them to the frame, this can lead to cracking of welds. If needed, use leather or rubber washes to shim between the tabs and the backbone to ensure an even fit. Do not sand seams or welded edges of gas tanks, if needed use a thin spread of body filler prior to painting.
Check Stock

BRS Outdoor Kerosene Stove Burners Portable Oil Stove Gas Stove Multi Fuel Stoves Camping Cooking Stove (BRS-8A)

  • ... gas tank, tighten and ventilate immediately, unscrew the gas tank when disassembling, and then unscrew the adapter. Be careful not to unscrew the valve body first, otherwise it will cause air leakage or even explosion. Bring a handbag.
  • 【Wide compatibility】 The camping stove is compatible with butane camping gas tanks, 7/16 threaded single butane/butane-propane mixing tanks (EN 417) and 1lb propane tanks (furnace adapter not included)..
  • 【Lightweight and portable】 The weight of the windproof gas stove for camping is only 8.5 oz / 240 g. The compact and foldable design takes up less space and is easy to store. Portable propane tank adapters, backpacks, camping accessories and luggage are easy to store..
  • 【High-quality materials】The camping stove adapter is corrosion-resistant and durable.The threads are cut cleanly, tightened, and leak-proof..
  • 【All Weather】The remote tank cable design allows reversing the tank so that you can perform equally well in cold weather conditions. The fuel preheat tube ensures high efficiency and flame protection..
  • 【What do you get】 1 windproof camping gas stove, 1 carrying bag, 1 carton, welcome guide, our 90-day worry-free warranty and friendly customer service. High-quality materials.
Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

  • ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
  • ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
  • TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
  • VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Check Stock

RX WELD Argon CO2 Regulators Gauges Gas Welding Regulator cutting Regulator CGA580 With 6.6Ft Gas Hose

  • 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • 2.Features: 2" dual-gauges for easy reading..
  • 3.Safe Design: Accurate measurement of gas. Internal safety pressure relief design..
  • 4.Specifiction:Brass regulator body,CGA580 fitting, FEMALE 5/8" Outlet.
  • 5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.Plastic adjustment knob for smooth "easy touch" flow settings..
Check Stock