Best Dual Power Refrigerant Scale

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4" Fittings Can Tap Quick Coupler, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly.
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve).
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of piercing type re....
Check Stock

JRangelp AC Manifold Gauge Set Car AC Diagnostic Manifold Freon Gauge Automotive AC Gauge Set AC Freon Charge Kit with 3-Color Charging Hoses & Dual Gauge Valve for R134a

  • ✉Practical Function✉ This air conditioning system tester is mainly used for refrigerant filling of air conditioning systems and displays real-time system pressure..
  • ✉Complete Tool Set✉ Including AC manifold gauge, three 5ft extra long freon filling hoses, and hook, this AC manifold gauge set has a relatively complete set of accessories for you to use, so you don’t need to buy additional extension pipes, and you don’t need to worry about whether the pipe connections you buy are suitable..
  • ✉Dual Dial✉ Unique dual dial design, one blue and one red. Clear reading, easy to read. Pressure gauge with different color scale lines, with 4 different PSI scales, corresponding to different air conditioning refrigerants..
  • ✉Widely Applications✉ This A/C refrigerant diagnostic manifold gauge set is mainly suitable for refrigeration maintenance (refrigerants including CFC, HCFH, HFC, etc.), such as R12, R22, R134A, R404z, R410A and other refrigerants..
  • ✉High Precision✉ Low Pressure Gauge(Blue Gauge): 0~500PSI/0~35BAR, High Pressure Gauge(Red Gauge): 0~800PSI/0~55BAR. The accuracy error of pointer reading is 1.5.
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Meter 1/4" Fittings Can Tap Quick Coupler Adapter, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly..
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge..
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass R134A self-piercing can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. There is also a 1/4" male ....
Check Stock

BACOENG R134A R12 R22 Economy Refrigerant U-Charge Hose Kit Recharge Hose with Gauge R-134a Can to R-12/R-22 Port

  • This Kit doesn't include R134a quick couplers for AUTO AC refrigerant recharging. If you need it, please purchase separately or order our AUTO service....
  • This unique can tap has an R-134a screw on can connection and a R12/R22 service port connection..
  • Comes with an easy to read pressure gauge .Gauge has scale readings for R134, R12, & R22 Use for household with aerosol style cans..
  • NOTE: NO QUICK COUPLER FOR AUTO AC RECHARGING! Includes: Hose, Pressure Gauge, Refrigerant Can Tap, Hose Fitting.
  • Total length: 50cm/20inch, Refrigerant Can Tap: 1/2" acme fitting, Hose Fitting: 1/4" SAE, Pressure Gauge Scale: 0 - 350 PSI, Temperature Reading: ℉.
Check Stock

Kozyvacu Oil-less Portable Refrigerant Recovery Machine for Both Liquid and Vapor Refrigerant (3/4HP Single Cylinder)

  • ✅POWERFUL, STURDY AND COMPACT – 1HP compressor is powerful enough to be professional tool for you to perform onsite job. Sturdy body and inside components to ensure you to use this recovery machine for long time. The compact design makes this refrigerant recovery machine easy to transport..
  • ✅HIGH EFFICIENCY RECOVERY – Twin Cylinder oil-less high power compressor performs much better than smaller compressor and it will quickly recovers vapor and liquid refrigerants.
  • ✅WIDE APPLICATION: High durability refrigerant recycle unit with oil-free compressor has no pollution from lubricants, making it universal for Category III, IV, V refrigerants such as R12, R134a, R401C, R406A, R500, R22, R401A, R401B, R402B, R407C, R407D, R408A, R409A, R411A, R411B, R412A, R502, R509, R402A, R404A, R407A, R407B, R410A, R507. Widely used on auto, household, commercial appliances (air conditioner, freezer, heat pump unit, etc). Not for explosive, flammable or corrosive refrigerant.
  • ✅OVERLOAD & HIGH PRESSURE MULTIPLE PROTECTION: Built-in blue input gauge (LP) and red output gauge (HP) have clear scale for easy observation at anytime. The input pressure of the unit should not exceed 377psi. Benefited from internal high pressure shut-off switch,....
Check Stock

Robinair 34102 Refrigerant Tank for R-134a refrigerant not included - 30 lbs Light Blue

  • Refillable 30 pound refrigerant recovery tank for use with R-134a refrigerant (not included).
  • Direct replacement tank for use with Robinair No. 34234, 34300-2K, 34800, 34134A, and 34134-2K Refrigerant Recovery/Recycling/Recharging Stations.
  • 1/2 inch ACME fittings on dual valves necessary for both recovery and recycling.
  • Tank is shipped with a nitrogen fill to prevent moisture contamination and must be evacuated before use.
  • Note: this tank DOES NOT include actual R-134A refrigerant - it is an empty tank (except for temporary nitrogen fill) designed for recovery use.
Check Stock

Air Conditioner Refrigerant Low and High Pressure Gauge 70mm/2.7inch for R410A R134A R22 PSI PA AC Pressure Gauges

  • [PREMIUM QUALITY] The air conditioner refrigerant pressure gauge made of high quality material, vivid dial and clear scale, easy to read the data..
  • [SIZE] Inlet of air conditioner pressure gauge connector: 1/8” NPT, 70mm/2.7in dial plate..
  • [COMPATIBILITY] Compatible Refrigerant: R410A R134A R22 refrigerant pressure gauge.
  • [PRESSURE] Range: Low pressure gauge (Blue): 0-500psi, High pressure gauge (Red): 0-800psi..
  • [PACKAGE INCLUDE] 1Pc x High pressure gauge, 1Pc x Low pressure gauge. If you have any concerns, feel free to contact us..
Check Stock

Chemours Brand R134a for MVAC use in a 12-Ounce Self-Sealing Container 2

  • Refillable 30 pound refrigerant recovery tank for use with R-134a refrigerant (not included).
  • Direct replacement tank for use with Robinair No. 34234, 34300-2K, 34800, 34134A, and 34134-2K Refrigerant Recovery/Recycling/Recharging Stations.
  • 1/2 inch ACME fittings on dual valves necessary for both recovery and recycling.
  • Tank is shipped with a nitrogen fill to prevent moisture contamination and must be evacuated before use.
  • Note: this tank DOES NOT include actual R-134A refrigerant - it is an empty tank (except for temporary nitrogen fill) designed for recovery use.
Check Stock

Yellow Jacket 49017 Digital Refrigeration Gauge

  • ...sure and temperature test to help you determine refrigeration capacity of refrigeration system. The lower the pressure and temperature of the evaporation(Ev)/condensation(Co) are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do. It also could test the temperature of the refrigerant in the high/low-pressure pipes..
  • 【Superheat and Subcooling Test&Pressure Leak Test】When refrigerant type is set and temperature clamps are connected to air conditioning pipes, HVAC gauges automatically read the degree of Superheat(SH) and Subcooling(SC). The higher the degree of superheat, the smaller the opening of the expansion valve (the refrigerant filling is less) can be determined. Calculate the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking..
  • 【Vacuum Pumping & Refrigerant Filling & Built-in 89 kinds of Refrigerant Database HVAC Manifold】Digital manifold gauge set can connect refrigeration equipment and vacuum pump for vacuum pumping operation. Vacuum pumping can make it easier to fill the refrigerant into the pipeline. HVAC gauges is built-in 89 kinds of refrigerant pressure&temperature database. Before you fill refrigerant, you can set....
Check Stock